Tuvie Future Design, Technology, Industrial Design, Car Concept, Futuristic Gadget, and Product Concept

Today with lot of environmental developments happening world over like global warming, energy crisis, lifestyle changes, it’s become even more difficult to design houses meeting all these requirements. More and more architectural designs are using digital technologies with respect to modeling, simulation, evaluation and fabrication resulting in complex shaped buildings which incorporates the above challenges. One such project is coming up in Tel Aviv whose primary resources are sun, wind, and land and these are fairly distributed amongst these complex structures thus making an optimum utilization of all. It’s of course high quality housing complete with latest gadgets but run on the natural resources. Architect Yiftach Ben Meir, the designer, is a recent graduate from The Faculty Of Architecture and Town Planning at Technion, Israel Institute of Technology (IIT). His final project SeaO2 was conceived under the framework of Tecnion Computer Oriented Design Studio, T_Code with the instruction of dr. Yasha j. Grobman.

Text from Yiftach :

SeaO2 is an experimental ecological housing project. The project poses an alternative to current plans for Tel Aviv North West coastal district. SeaO2 demonstrates vast use of cutting edge computer software, some being used in the aerospace industry, in order to improve building performance and to ensure the existence of a sustainable urban environment with a minimal ecological footprint. The project final form is a consequence of a scientific approach that calculates numerous of elements: the sun orbit, wind conditions, maximum open scenic views, very high density and more, all in a free-form organic manner.

Advanced Computer Simulations ensure the project’s credibility. The project’s unique morphology enables: optimized solar reception for heating at winter time, self-shadowing and solar reception for electricity generation at summer time, natural lighting, optimized natural ventilation, open looks to the natural coastal environment, public green spaces, rain collection and more. Various passive mechanical systems complement the basic morphology, enable better performance and create an energy efficient, environmentally friendly housing project

Designer : Yiftach Ben Meir

The Pi electric bicycle uses a semi-automatic 8-speed transmission to downshift into a lower gear for climbing hills, then up shift for rapid acceleration to a maximum of 20 mph on flats and allows you to pedal normally because the motor automatically disengages when not in use. Powered by a 750-watt electric motor housed in the horizontal chain and motor assembly, the Pi electric bicycle is capable of three modes of operation: electric motor power, human power, or the human-electric hybrid power combination. The electric motor and rider utilize the same 8 speed semi-automatic transmission making rapid acceleration from a stop or lower gears available for steep inclines possible (but with slower acceleration.

Read the rest of this entry »

Autonoma, This solar public lighting pole is totally autonomous and presents the advantage to be placed in any isolated area where electricity is not available. Built with power LEDs which offer lighting performance and energy saving it also can be programmed. Smart with its detector of presence, when a pedestrian comes close, the light intensity of the pole raises to full power and decreases to a third only to spare itself, when there is nobody around.

Designer : Mauricio Clavero

I’m a little bit confused with this motor design, where do I sit ? This renovation concept by Confederate Motor Company uses minimal machine, using the fewest pieces, moving parts and systems to accomplish its dynamic mission. The word “Renovation” itself means rebirth, which also represent the rebirth of their headquarters company after destroyed by Hurricane Katrina. The Driving concept was the creation of a conceptually flexible foundation to allow a place for growth and further iteration; a utilitarian modular flexible foundation.

Conceived by the leader of our conceptual design team, Mr. Ed Jacobs, the motorcycle is at once primitive, bohemian, and yet highly technical. Renovatio is un-compromised, light weight, possesses enormous torque, is capable of extreme performance, yet has maximum real world streetable active safety. It is graceful in motion, yet potentially brutal. It exudes inner beauty through absolute follow through of truth of concept. Renovatio has great proportions, holistic brand gestalt, is original, impactful, alluring and elegant

Specification :

Dimensions:
Weight: 340lbs.; Wheelbase 60″; Seat Height 30″; 27 degree rake.

Engine:
103 cubic inch Confederate Water cooled 90 degree utilitarian modular platform
150 HP normally aspirated – 190 HP optional supercharger

Transmission:
Confederate design; six speed, close ratio.

Primary:
Internal gear driven

Front End:
Girder-type aircraft aluminum and titanium multi-link with
shock centered on steering axis; Carbon fiber struts.

Swingarm:
Single sided aluminum cast piece.

Suspension:
Rear-Penske coil over shock with remote reservoir multi adjustable; Front-Penske coil in shock, multi adjustable.

Lighting:
Forward LED headlight and blinker system; integrated into girder.

Fuel Cell:
Confederate design, one piece composite fiber cell;
Fuel Capacity 4.5 gallons with integrated air box.

Gauge:
Single integrated tachometer and speedometer.

Wheels:
Blackstone structural carbon fiber.

Identification:
Engine & Neck contain ID numbers.

Preliminary Engine Specifications:
Type: V-twin

Displacement: 1686 cc (103 cu. in.)

V-angle: 90 degrees

Compression ratio: 11.0:1

Valve configuration: Over head valves, 2 per cylinder

Valve lifters: Hydraulic roller

Bore x stroke: 108 x 92mm (4.252 x 3.622 in.)

Fuel system: Sequential fuel injection

Fuel Type: Premium unleaded

Horsepower: 135 hp (SAE Certified)

Torque: 125 lbs-ft (SAE Certified)

Fuel shut off: 7800 rpm

Block: 356-T6 Sand cast aluminum

Cylinder bores: Liner-less Nicom coated parent aluminum

Cylinder head: 356-T6 Sand cast aluminum

Intake manifold: Carbon runner, dual throttle body

Exhaust manifold: 321 Stainless steel headers

Crankshaft: Billet 4340 steel

Camshaft: Billet 8620 VAR steel

Connecting rods: Forged Powder Metal Titanium

Pistons: Forged 4032 Aluminum

Valves: Forged titanium