Tuvie Future Design, Technology, Industrial Design, Car Concept, Futuristic Gadget, and Product Concept

I’m a little bit confused with this motor design, where do I sit ? This renovation concept by Confederate Motor Company uses minimal machine, using the fewest pieces, moving parts and systems to accomplish its dynamic mission. The word “Renovation” itself means rebirth, which also represent the rebirth of their headquarters company after destroyed by Hurricane Katrina. The Driving concept was the creation of a conceptually flexible foundation to allow a place for growth and further iteration; a utilitarian modular flexible foundation.

Conceived by the leader of our conceptual design team, Mr. Ed Jacobs, the motorcycle is at once primitive, bohemian, and yet highly technical. Renovatio is un-compromised, light weight, possesses enormous torque, is capable of extreme performance, yet has maximum real world streetable active safety. It is graceful in motion, yet potentially brutal. It exudes inner beauty through absolute follow through of truth of concept. Renovatio has great proportions, holistic brand gestalt, is original, impactful, alluring and elegant

Specification :

Dimensions:
Weight: 340lbs.; Wheelbase 60″; Seat Height 30″; 27 degree rake.

Engine:
103 cubic inch Confederate Water cooled 90 degree utilitarian modular platform
150 HP normally aspirated – 190 HP optional supercharger

Transmission:
Confederate design; six speed, close ratio.

Primary:
Internal gear driven

Front End:
Girder-type aircraft aluminum and titanium multi-link with
shock centered on steering axis; Carbon fiber struts.

Swingarm:
Single sided aluminum cast piece.

Suspension:
Rear-Penske coil over shock with remote reservoir multi adjustable; Front-Penske coil in shock, multi adjustable.

Lighting:
Forward LED headlight and blinker system; integrated into girder.

Fuel Cell:
Confederate design, one piece composite fiber cell;
Fuel Capacity 4.5 gallons with integrated air box.

Gauge:
Single integrated tachometer and speedometer.

Wheels:
Blackstone structural carbon fiber.

Identification:
Engine & Neck contain ID numbers.

Preliminary Engine Specifications:
Type: V-twin

Displacement: 1686 cc (103 cu. in.)

V-angle: 90 degrees

Compression ratio: 11.0:1

Valve configuration: Over head valves, 2 per cylinder

Valve lifters: Hydraulic roller

Bore x stroke: 108 x 92mm (4.252 x 3.622 in.)

Fuel system: Sequential fuel injection

Fuel Type: Premium unleaded

Horsepower: 135 hp (SAE Certified)

Torque: 125 lbs-ft (SAE Certified)

Fuel shut off: 7800 rpm

Block: 356-T6 Sand cast aluminum

Cylinder bores: Liner-less Nicom coated parent aluminum

Cylinder head: 356-T6 Sand cast aluminum

Intake manifold: Carbon runner, dual throttle body

Exhaust manifold: 321 Stainless steel headers

Crankshaft: Billet 4340 steel

Camshaft: Billet 8620 VAR steel

Connecting rods: Forged Powder Metal Titanium

Pistons: Forged 4032 Aluminum

Valves: Forged titanium

BMW and Mercedes would have to struggle for lower emissions and higher fuel efficiency. With European CAFE regulations, measured in tailpipe CO2 emissions rather than fuel economy, also getting much tighter, Germany’s luxury automakers, too, are feeling the heat from global warming. Even Audi which can average out its CO2 figures across the entire VW Group portfolia, feeling the pressure to build more fuel-efficient cars and smaller body.

Audi management has settled on a strategy of making its 2009 A2 a straightforward subcompact with mass appeal, rather than leftfield, like the Gen I aluminum A2. This would be key rival for BMW and Mercedes if they bring it to USA, since they offer more interior space than a Mini. The 2009 A2 won’t have a unique platform, but will use the VW subcompact underpinnings, like the Polo, with gasoline engines ranging from 1.2 to 1.8 liters, plus diesels.

The Tomahawk is a Viper V-10 based motorcycle, a 500 horsepower engine with four wheels beneath it. The engine breathes through twin throttle bodies mounted right up front. The Tomahawk concept is an awesome-sounding machine. Clouds of blue smoke vied for attention with the throaty rumble of the mighty V-10, and hitting the gas visibly opened the twin throttle body blades up front where the headlight would normally be. Though deeper and more rumbling than most motorcycles, it did not seem to be louder overall – just deeper and less shrill.

The Dodge Tomahawk can reach 60 miles an hour in about 2.5 seconds, and has a theoretical top speed of nearly 400 mph. Each pair of wheels is separated by a few inches and each wheel has an independent suspension. Bernhard said four wheels were necessary to handle the power from the engine.

Engine
1. 500 bhp (372 kW) @ 5600 rpm ( 60.4 bhp/liter); 525 lb.-ft. (712 Nm) @ 4200 rpm
2. 10-cylinder 90-degree V-type, liquid-cooled, 505 cubic inches (8277 cc)
3. 356-T6 aluminum alloy block with cast-iron liners, aluminum alloy cylinder heads
4. Bore x Stroke: 4.03 inches x 3.96 inches (102.4 x 100.6)
5. Two pushrod-actuated overhead valves per cylinder with roller-type hydraulic lifters
6. Sequential, multi-port electronic fuel injection with individual runners
7. Compression Ratio: 9.6:1
8. Max Engine Speed: 6000 rpm
9. Fuel Requirement: Unleaded premium, 93 octane (R+M/2)
10. Oil System: Dry Sump; takes 8 quarts Mobil1 10W30 Synthetic
11. Cooling System: Twin aluminum radiators mounted atop engine intake manifolds, force-fed from front-mounted, belt-driven turbine fan.
12. Takes 11 quarts of antifreeze.
13. Exhaust System: Equal-length tubular stainless steel headers with dual collectors and central rear outlets.

Suspension
Front:
Outboard, single-sided parallel upper and lower control arms made from polished billet aluminum. Mounted via ball join t to aluminum steering uprights and hubs. Five degrees caster. Single, fully adjustable centrally located coil-over damper (2.25-inch coil with adjustable spring perch); pullrod and rocker-actuated mono linkage. Center-lock racing-style hubs.

Rear:
Hand-fabricated box-section steel inboard swing arms, incorporating “hydral-link” lockable recirculating hydraulic circuit parking stand. Single fully adjustable centrally located Koni coil-over damper (2.25-inch coil with adjustable spring perch); pushrod and rocker-actuated mono linkage. Center-lock racing-style hubs

Performance
0-60 mph: 2.5 seconds (est.)
(Some estimate 1.9)
Top Speed: 300+ mph (est.)

Dimensions
Length: 102 inches
Width: 27.7 inches
Height: 36.9 inches
Wheelbase: 76 inches
Seat Height: 29 inches
Weight: 1,500 lbs.
Track, Front: 8.75 in
Track, Rear: 10 in
Weight Dist: 49F/51R
Ground Clearance: 3 in
Fuel: 3.25 gallons

Transmission
Manual, foot-shifted two-speed
Aluminum-cased two-speed, sequential racing-style with dog ring, straight-cut gears
Gear Ratios: 1st 18:38; 2nd 23:25
Clutch: Double-disc, dry-plate with organic friction materials, hand lever actuated with assist
Final drive: Dual 110-link motorcycle-style chains
Front Sprockets: 14 teeth
Rear Sprockets: 35 teeth
Longitudinal, centrally mounted engine, rear-wheel drive layout; monocoque construction, engine is central, stressed member. Body of billet aluminum.

Price
$555,000

Look at the great winner of peugeot design contest 2007 :

The peugeot design contest theme was re-invent the ‘Drive of Your Life’, six letters sum up the philosophy of this fourth invitation to the creativity: P.L.E.A.S.E. !
P : Pleasurable (to drive)
L : Lively
E : Efficient
A : Accessible
S : Simple
E : Ecological

As explained by Mr. Mihai Panaitescu, 20, student of I.E.D. Turin major in Transportation Design the concept peugeot flux was to design a vehicle that pleases it’s occupants in every way. It’s versatility combined with it’s sportiness and the ability to use it in different environments are in my opinion some of the vehicle’s strong points.

Either as an explorer of sandy beaches, sweeping mountain roads, or simply commuting in the city, the Flux concept embodies a vehicle that is made to please. It’s dynamic shape and open air cockpit make it lively and fun to drive as the occupants are always in contact with their surroundings. Read the rest of this entry »