Text from John :
Imagine sleeping while you drive. This notion may sound insane, but it is very possible with the Saucer. The world today is growing at a very fast pace and will continue to do so, meaning that people will not have enough time for anything and sadly that includes our precious sleep-time. Just to mention a few, perhaps you often have late nights from work and are too tired to drive or you need to get to an appointment, which is hundreds of miles away, early as possible the next morning or maybe you were invited to a party, but too drunk to drive back home. This is where the Saucer comes in…

Of course, the vehicle is not designed for an alcoholic individual or to cure insomnia, rather it is designed for those with very busy lives that leave them with little or limited sleep time.

The Saucer is a self-driven vehicle with a single size bed arrangement, where the driver is no longer the driver and instead take the time to sleep as he/she travel to his/her destination. This unique vehicle is especially targeted at night-shift individuals who are a long way from home. Simply put, if you’re feeling too tired to drive, don’t leave home without it.

The interior is soundproof and is equipped with a set of programming consoles that self-drive the vehicle. Even when awake, while traveling to your destination, there is enough room for you to lay back and relax, and keep yourself busy. Perhaps reading a magazine or newspaper, or simply turning-on some entertainment. A medium-size cargo compartment is also integrated at the rear end of the vehicle where you can store up some of your gear, such as a briefcase or a suitcase. – inspired by the Alien Flying Saucer.

Designer : John Bukasa

This bike features a very close to “vintage racer” look with its regenerative breaking and a hub battery since they are similar to a set of drum brakes. The chain is swapped for a carbon shaft, bevel drive and nylon hypoid gears enclosed in right swing arm. Behind the pedal shafts, a small six speed cassette type remains hidden and comes operational if the battery becomes flat any time. Both pedals are lockable at 180 degrees and can be used as foot pegs

Designer : Jean François Vicente

Text from Eli :
The Gluco(M) is a medical concept that provides diabetics with three functions: instant and non-invasive glucose readings, history of previous readings with averages, and an insulin chamber with a loaded syringe cartridge for injections.

Diabetics must monitor their own blood glucose levels times a day, to determine how far above or below normal their glucose is and to determine how much insulin(s) they may need. This is usually done by placing a drop of blood from a skin prick onto a glucose strip and then inserting the strip into a glucose meter, a small machine that provides a digital readout of the blood glucose level.

The Gluco(M) uses a technology known as “reverse iontophoresis.” By using an electric current running throughout the sensors, it collects glucose samples from fluids in the body. The device is then able to read the sample and give a reading. With this technology, diabetics can keep a much closer watch on their glucose levels and avoid the problems that may occurs from having levels too high or low. The Gluco(M) enables users with the convenience of checking blood-sugar levels more frequently throughout the day, thus yielding for better control of glucose in the blood stream.

Designer : Eli Hariton

What Petr say about this Robotic Taxi :

Instruction to use robotaxi
- You call taxi by mobile phone
- Robotaxi operator will evaluate the closest taxi
- Robotaxi will arrive in very short time and open the door for you
- Put your baggage and go inside the taxi
- You need to set your destination (by your voice or by touch panel)
- While in the road, you can watch video on double-sided cabin window or surfing on internet
- Payment will be done automatically (by wireless reading from you credit card)

Designer : Petr Kubik

The main goal of these useful and innovative designs for hospital furniture and apparatuses is to help fight against healthcare associated infections such as MRSA and HCAIs. The prototypes have used cutting edge techniques in order to reshape the patient transport, bedside environment and usual medical equipments keeping easy clean in mind. The design also influences staff and patient behavior to lessen the probability of exposure to HCAIs.

Designer : Design Council via Core77

[Press Release]

DRAGONFLY, A METABOLIC FARM FOR URBAN AGRICULTURE

2009 : 800 MILLION OF URBAN FARMERS FOR RESPONSIBLE ECO-CITIES

The world of fast-food and frozen food is over! The urban keen interest of the beginning of our Century turns toward the garden flat bringing back the countryside in our overcrowded cities fighting from now on for a community urban agriculture able to contribute to the durability of the city and to rethink the food production.

On the roofs, terraces, balconies, in the hollow of the non-built public spaces, in the interior yards and the suspended greenhouses, the eco-warrior aspires to escape from its competitive and consumeristic universe imposed by the laws of the market. He desires to cultivate its immediate landscape so as to better take root in the ground by creating his own ecologic and alimentary biodiversity. The consumer becomes from then on producer and the garden inhabitant !

From the Parisian « worker gardens » to the « community gardens » of New York going though Muscovite « vegetable squares », eight hundred million of urban farmers, i.e. more than one human being out of ten, consume nowadays chlorophyllous products from these cosmopolitan kitchen gardens. These new gardens, aware of the emergency to reduce our fuel consumption and the necessity to modify our behaviour facing the climatic changes, decrease thus their environmental impact and build eco-responsible cities on a community way.

2025 : 5.5 BILLION OF CITY SLICKERS FACING THE FOOD CHALLENGE OF THE 21ST CENTURY

According to the PNUD (Programme of the United Nations for the Development), the worldwide urban population will go from 3.1 billion of inhabitants in 2009 up to 5.5 billion of inhabitants within 2025. Looking for a positive energetic assessment, the contemporary city aims within fifteen years at producing cleanly and intensively more energy than it consumes so as to pack this urban exodus! It develops therefore the urban agriculture to become food self-sufficient by recycling at the same time its liquid waste by phyto-purification, its solid waste in fertilizers by composting and by producing energy by biomass, photovoltaic cells and other renewable energies (thermic solar, photovoltaic solar, wind, tide-turbine energies…).

In order to avoid the asphixiation of the planet and the feeding of its 9 billion of inhabitants within 2050, it deals thus with reinventing the traditional energetic pattern between the city and the countryside between western countries, emerging countries and developing countries. This sums up as following: on the one hand import of natural and food resources, and on the other hand export of waste and pollution. The ecologic city aims at reintegrating the farming function on the urban scale by emphasizing the role of the urban agriculture in the use and the reuse of natural resources and biodegradable waste so as to close the loop of ecologic flows.

The urban agriculture can feed the city without any pesticide or chemical fungicide (whose toxicity is proved on the human being : cancer, sterility…), and make it less food dependant of its backcountry or other regions of the world. Organising the distribution of fresh products in short circuits, that means linked directly with the consumer, the urban agriculture complete thus the traditional agriculture. In addition to the nutritive quality of the produced and consumed food, the urban agriculture is also a growth lever of the urban unemployment market and the local economy. It is used directly as a social link in the conciliation of the primary needs of the newcomers with the challenge of their integration in the life of the city, fighting thus against poverty and exclusion. On the sanitary level, this farm approach presents also an interesting potential for the decontamination of polluted grounds and undergrounds as well as for he purification of the polluted atmosphere in CO2.

Due to the fuel crisis and climatical change, the rural agriculture of the western countries must answer to the worldwide food crisis of the developing countries and mainly Africa. Its role is from now on to produce (with an increase estimated of 60% within 2050) all the foodstuffs transportable by boat such as cereals or corn. This is based on the evolution of the science and the most advanced biotechnologies. In addition to this nutritious role, the rural agriculture is newly challenged to recycle its own culture rebus for the green chemistry in order to produce the bio fuel called “second generation fuel” using the energy of non-consumable materials from the plants, that means fibres such as celluloses.

DRAGONFLY, A NOURISHING VERTICALY CULTIVATED CENTRAL PARK

The architecture has to be in the service of this new agriculture and to design this new social desire in this context of ecologic mutation and food autonomy! The Dragonfly project suggests therefore building a prototype of urban farm offering around a mixed programme of housing, offices and laboratories in ecological engineering, farming spaces which are vertically laid out in several floors and partly cultivated by its own inhabitants. This vertical farm sets up all the sustainable applications in organic agriculture based on the intensive production varied according to the rhythm of the seasons. This nourishing agriculture is furthermore in favour of the reuse of biodegradable waste and the keeping of energy and renewable resources for a planning of ecosystemic densification.

Floor by floor, the tower superposes not only stock farming ensuring the production of meat, milk, poultry and eggs but also farming grounds, true biological reactors continuously regenerated with organic humus. It diversifies the cultivated varieties to avoid the washing of stratums of soft substratum. Thus, the cultures succeed one another vertically according to their agronomical ability to provide some elements of the ground between the essences that are sowed and harvested. The tower, true living organism, becomes thus metabolic and self-sufficient in water, energy, and bio-fertilizing. Nothing is lost; everything is recyclable to a continuous auto-feeding!

A BIONIC AND ENERGETICALLY SELF-SUFFICIENT ARCHITECTURE
The architecture of Dragonfly prototype suggests reinventing the vertical building (that outlined the urbanistic booming of New York City since the 19th Century) as structurally and functionally as ecologically and energetically.

To ensure the social diversity and a permanent life cycle (24h/24) in the tower, the mixed programmation is mainly laid out around two poles of housing and work places. Around housings, offices and research laboratories as well as the most private to the most public agricultural and leisure spaces are designed in gardens, kitchen gardens, orchards, meadows, rice fields, farms and suspended fields. The distribution of flows is made around a true safe spine spreading in loop the numerous elevators, the goods elevators and stair wells serving all the levels by separating simultaneously the inputs and the outputs recycled from plants, animals and human beings.

Architecturally, the functional organisation is represented by two oblong towers symetrically arranged in pair around a huge climatic greenhouse that links them and deploys itself between two crystalline wings. These very light wings in glass and steel retake the loads of the building and are directly inspired from the structure of the dragonfly wings coming from the family of “Odonata Anisoptera” whose transparent membrane is very finely nervured. Two inhabited rings buttress around these wings. Their organically chiselled exo-structure accommodates the inter-climatic spaces that receive the agrarian cultures. They buttress.

The whole set forms «double layer» architecture in bee nest mesh that exploits the solar passive energy at its maximum level, by accumulating the warm air in the winter in the thickness of the exo-structure, and by cooling the atmosphere by natural ventilation and by evapo-perpiration of the plants in the summer. Protecting thus the cultures from climatic changes in New York (from -25.5°C in the winter to +41°C in the summer), these plug spaces are useful to reflect on the agriculture not anymore in terms of surface area but really in terms of volume. Actually, whereas grounds nourish orchards, each wall and each ceiling are metamorphosed into three-dimensional kitchen gardens. The interior frontages of the housing and offices throw towards the skyline of New York the cantilever of their hydrophonic balconies with hexagonal section thanks to what it multiplies the culture layers by floors. The vegetation abounds, the earth is swarming of insects and animals are freely brought up in holding tanks by urban consumers with low income. The architecture becomes eatable!

Designer : Vincent Callebaut Architect

Designer : Jordan Guelde

The main purpose of designing this Mercury skate is to decrease the skater’s fatigue and provide them an easier and smoother ride on the pavement with the least harms. If you’ve ever skated on a paved surface you had experienced a vibration feelings on your heel and sometimes it causes you to feel uncomfortable. This vibration will translate itself from heel to knee joints which is harmful not just for knees but for the eyesight as well.

This general problem of line skates has been considered in this Mercury skate design. It has a new style of frame, fixing system and a damper to absorb the harmful vibration mentioned above and also it can help the skaters to accelerate faster and gain a higher speed.

Designer : Pouyan Mokhtarani

Text from Sergio:

The AUDI brand is a well-respected and trusted product in the automotive world. The iTT concept phone is a result of exploring AUDI’s form vocabulary on a handheld device such as a cell phone.

The iTT phone incorporates similar materials and finishes found on the roadster TT and the high-class A8 model. User-interface is also similar to current trends in both automotive interiors and hand-held devices such as trackballs and backlit customizable keyboards. The innovative tilting screen allow easy reading during driving.

Designer : Sergio Gedanke