Junji explanations :
I have come to realize that people’s interest in marine leisure is at all time high. More and more people are enjoying snorkeling, diving, and boating. They are many concepts and fully functional personal submersibles. Hotels such as in Dubai provide underwater experience. However, I felt that there is a disconnection between the underwater realm and water surface activity. The concept was the result of my approach to balance the physical and emotional aspects that encompass marine activities: (i)the love, enthusiasm, and curiosity of people for marine experience on water and underwater, (ii)safety of all life form underwater which includes people, (iii)nostalgia for the great spinning wheel of steam boats and aspiration for something new. The way it submerges or re-surfaces is simple: ballast tank in the hull is filled to submerged or emptied to re-surface. Buoyancy is controlled by partially releasing the water in the ballast tank.

When on surface, Ammonoq is just like any other boat except that it has a glass top. During the submersible mode, oxygen is made available from the re-breather unit housed under the seat. It provides up to three passengers. Each seat has a compartment where the regulator is stowed and is readily accessible to each passenger. There are also dive tank storages in the rear of the cabin for scuba diving. Therefore, the concept can also be for rescue mission underwater for coast guards.

There are two fin-wheels and each is driven by an electric motor. The fin-wheel is made out of the same materials as scuba dive fins and can rotate in the same direction to propel forward or backward. The long fins are used to propel forward and there are also wedge-shape parts on the fins that push against water to reverse. Since the fins are flexible, there is much lesser risk of injuries unlike propellers.

The traveling speed is expected to be about 50-60km/h on water, and of course, much slower underwater. Maneuver is also possible by one wheel rotating at a faster rate then the other or one wheel at a still. The steering utilizes electro-servo control that senses at what rate to turn from how much the driver tilts the handles.

The control console provides information such as speed, rpm, depth, oxygen level, as well as location by Sonar and GPS. One thing that I did not show is the remote key transmitter which allows the rider to control Ammonoq outside of the cabin. This gives freedom to the driver to enjoy diving while Ammonoq ‘tag’ along side.

Designer : Junji Kawabe

Text from Alberto :
Space tourism is already a concept that many companies are taking seriously. Imagine that you have traveled to the moon with four other lucky tourists. You arrive on the moon which is still very empty, and now you and your four travel companions have six hours spare time. Design a moon recreation vehicle with this new form of travel and leisure activity in mind.

FOUR WHEEL STEERING ensures soil preservation by two footprints while providing improved steering.

COORDINATED STEERING reduces damage on the moon surface since turning impact is limited to two footprints by turning front and rear wheels in the opposite direction.

PACKAGE: Passenger Seats are distributed in order to offer a wide central aile. Space is needed to access the seats due to the space suits size. The pilot is centrally located to improve his/ her visibility and vehicle control. Besides self-levelling and transport height according to the ground conditions, SUSPENSION ARMS place the rear of the vehicle near the ground in order to provide access for passengers and pilot.

ENVIRONMENT: The relatively insignificant lunar atmosphere involves:

A. FRAGILITY
- Footprints must be reduced since they will last for thousands of years à Solution
- Dust thrown up from the wheels must be minimized à Solution

B. HOSTILITY
- Extreme temperatures varying from 100ºC to -173ºCà Solution
- Heterogeneous topography à Solution &

CONCEPT: Moon Recreation Vehicle that allows exploration and cooperation with professional astronauts while minimizing influence on the environment. The self-leveling on the move provided by the suspension arms improve the conditions of transport and in addition it is intended to create the sensation of walking on the moon!

MOON RECREATION VEHICLE

The body concept consists of 4 panels (two side panels, the roof and the floor which would also have a function of frame since it would contain the drive unit). These panels would be assembled on the “skeleton” frame (similar to one of the sketches). Suspension arms and wheels would complete the vehicle. So all the parts would fit into the shuttle meanwhile the final assembly could be undertaken at the moon.
The idea behind the glass panels is to provide windows as bigger as possible in order to offer a big scope for the passengers. The driver would also enjoy a big windscreen. I guess an environment like the Moon might intimidate. The idea is to transmit safety by means of:
- rounded surfaces: things like an egg or a dome are structural masterpieces.
- width provided by the suspension arms and wheels around the vehicle body: the moon surface is quite waved and hilly.

The footprints left behind by the Apollo astronauts will last for many thousands of years because there is no wind on the Moon. The Moon has no atmosphere, so there is no weather to erase the footprints. Although gravity is extremely low, we are talking about a big vehicle with five people inside so I think wide wheels would reduce compaction and by no means are useless, since the concept pretends to be as friendly with the environment as possible.

The beginning of the project coincided with the announcement of The Police tour. After all, the lyrics provided me with some messages about the environment and the vehicle.

Designer : Alberto Seco

The basic idea of the design background is the passion of human activities in visualizing graphic and colors trough basic painting activity. How the conservative ways and behavior are blended with digital-modern tools and people are brought into the basic feeling and sensing their old-fashion style in producing visual onto a media in term of digital life style.

Palette is a hardware system design concept that designated for digital artist, painter, design visualizer and people with passion in visual arts. The system were designed based on the background of basic painting behavior and its physiology activities. Palette is designed to have connectivity with other devices such main PC system, Main monitor or other wireless peripherals. connectivity between them are wireless and the user interface screen surface of the palette is using photo-optic visual sensor with color recognition as its main advantage.

The innovative value of palette is its capability to recognize analog color into digital format and the concept of special computer which in the way of hardware and software structure are made specially for graphic-visual work.

Palette’s physical form analogy is taken from wooden palette and reflect the concept of mix-figuratives form between ‘digital’ and ‘analog’; classic meets modernity. The whole design are surfaced with black reflection glass-illuminating looks which combined with wooden coloring and texture in minor parts. The present and mix of black reflection and wooden fixtures emerge classy-modern status which based on the aesthetical concept of “conservative meets digital”. Hm…the words “conservative meets digital”, I couldn’t agree more.

Source : GizmoWatch via Next-Gen PC

Smell, the most evocative of the senses, can unconsciously trigger entire memories, complete with deep-rooted associated emotions. The average human is able to recognise approximately 10,000 different odours. Over time, odour-memory remains as other recollections fade. People recall smells with 65% accuracy after a year, while visual recollection of photographs sinks to about 50% after only three months.Nanotechnology plays a key role in the development of this new device. Using highly sophisticated sensors, the electronic ?nose? samples the odour of the caller?s environs and transmits this to the recipient electronically. Scientists have found that a distinct genetic pattern is associated with every odour, so it is simply a matter of matching electrical harmonics with gene activity. This way, the perception of a smell by electrical stimulation could be technologically induced.

When the phone is in ?flat mode? (opened flat), the LED touchpad, two screens and stereo speakers for audiovisual calls are accessible. (Wireless ?earbuds? are available.) In ?open mode?, two screens with a hidden camera and stereo speakers, interior scent detectors, emitter and exterior temperature sensors are revealed. In ?closed mode?, the phone?s slim profile befits traditional voice calls. The LED screen on the lower folding surface alerts the user to incoming calls.

Designer : Kimberly Hu