Designer : Front

Designer : Dima Loginoff via HomeDosh

Press Release :
With sculpted bodywork stretched taut over a powerful new physique, the 2009 VRSCF V-Rod Muscle rides its way onto the Power Cruiser scene with a broad-shouldered presence. Gaping air scoops, sweeping side-pipe exhaust and a huge rear tire spinning under a clean, clipped fender speak to a contemporary, urban sense of style and performance. The Muscle pushes the Harley-Davidson V-Rod platform into a new turf, where it aims to hold its ground.VRSC Key Features

1250cc Revolution V-Twin: Standard on all 2009 VRSC models, the 60-degree Revolution 1250cc V-Twin is liquid-cooled and features Electronic Sequential Port Fuel Injection (ESPFI), dual overhead cams, four-valve heads, and a five-speed transmission. The engine is rubber-mounted in a hydroformed steel perimeter frame. A shell covers the large-volume airbox located over the engine. A five-gallon fuel tank is located below the seat on all VRSC models. The engine is tuned to produce up to 125 hp at 8250 rpm and up to 85 ft-lbs. of torque at 7000 rpm.

Optional ABS: Each VRSC model is available with optional, factory-installed Anti-Lock Braking System (ABS). Designed to work in conjunction with high-performance Brembo triple-disc brakes, this is the most advanced braking system offered on any power cruiser. ABS is designed to help the rider maintain control during braking events, especially those that happen in less-than-optimal conditions. The components of the Harley-Davidson ABS have been designed and packaged to be virtually invisible, preserving the uncluttered styling of the area around the wheels. Unlike many motorcycle ABS, Harley-Davidson ABS is not a linked system, meaning the rider maintains full, independent control of both front and rear brakes.

New V-Rod Muscle
The wide, angular air-box cover and chopped tail section look as solid and smooth as billet and give the new V-Rod Muscle lines that are clean and powerful. The size of the massive 240 mm rear tire is accentuated by the new broad, clipped and clean rear fender. The combination stop/tail/turn LED light is tucked under the edge of the rear fender, and the side-mount license plate leaves the fender surface smooth and uncluttered. Front-end styling balances the rear, with a trimmed fender that’s blacked out behind satin-finished inverted forks and LED turn signals integrated into the mirror stems. The radiator shrouds are restyled and color-matched to the rest of the bodywork, while the new airbox side covers incorporate air scoop inlets covered with woven wire mesh. The silver five-spoke cast aluminum front and rear wheels are a new design for the V-Rod line.

A new deep seat holds the rider firmly in place against the thrust of the Revolution V-Twin engine. The Muscle features forward foot controls, and a new handlebar with internal wiring. The handlebar is 1.5-inch cast aluminum with tubular steel ends and integrated risers. Bold polished forged aluminum triple clamps secure the inverted forks and frame the distinctive V-Rod teardrop reflector optic headlamp, housed in a satin black bucket.

The long profile of a 34-degree fork rake is stretched visually by new “sidepipe” dual exhausts in satin chrome with fat, turn-out mufflers exiting behind the rear axle. The V-Rod Muscle is available in Vivid Black, Brilliant Silver, Dark Blue Denim and Red Hot Sunglo.

New VRSCF V-Rod Muscle features:

• Liquid-cooled, 1250cc Revolution V-Twin engine
• 122 hp at 8250 rpm/85 ft. lbs. torque at 7000 rpm
• Pewter powdercoated powertrain with polished covers
• Assist/Slipper Clutch with reduced lever effort
• New clutch cover with relocated dipstick
• New Satin chrome dual side exhaust with turn-out mufflers
• New Five-spoke cast aluminum 19-inch front wheel
• New Five-spoke cast aluminum 18-inch rear wheel
• New Triple clamps
• New 43 mm Inverted forks
• New stylized rear shocks with black springs
• New airbox cover and side covers
• New front fender with black-out section
• New smooth rear fender
• New LED stop/tail/turn light
• New LED front turn signals integrated in mirror stems
• New seat shape
• New Internally wired handlebar cast with riser
• New instrument graphics and housing
• New side-mount license plate
• Black frame
• 240mm wide rear tire
• Forward foot controls
• Brembo triple-disc brakes
• Teardrop reflector-optic headlight
• 25.6-inch seat height
• Optional ABS
• Optional Smart Security System
• VRSCAW V-Rod

The evolution of the original Harley-Davidson power cruiser continues in 2009. The V-Rod rolls on a fat 240 mm rear tire. The sweeping exhaust ends in bright chrome slash-cut mufflers. A scooped seat cradles the rider just 26 inches off the pavement. Welded pull-back handlebar frame the clamshell instrument pod and teardrop reflector optic headlamp. Raked out to 36 degrees, 49 mm forks hold an anodized aluminum Profile laced front wheel. The V-Rod is available in six production color combinations, including new Red Hot Sunglo, Flame Blue Pearl, Vivid Black/Pewter Pearl, Flame Blue Pearl/Pewter Pearl and three new Custom Color combinations: Black Ice/Blue Ice, Light Candy Root Beer/Dark Candy Root Beer, and Big Purple Flake/Brilliant Silver.

Its structure is made of stone with a woody and a glossy finish. This dining table helps a family stay closer and it will give your food a perfect garnish you would expect. The opening of the dining table is due to the functioning of the longitudinal engine regulator present in the midst of the table. This unique work from Pogenpohl is definitely going to help all the house wives. Too bad there is no more detail images we can use, we’ll keep you posted if they come up with more images.

Source : Poggenpohl via HomeTone

Designer : ManWorksDesign

The Dodge Tomahawk can reach 60 miles an hour in about 2.5 seconds, and has a theoretical top speed of nearly 400 mph. Each pair of wheels is separated by a few inches and each wheel has an independent suspension. Bernhard said four wheels were necessary to handle the power from the engine.

Engine
1. 500 bhp (372 kW) @ 5600 rpm ( 60.4 bhp/liter); 525 lb.-ft. (712 Nm) @ 4200 rpm
2. 10-cylinder 90-degree V-type, liquid-cooled, 505 cubic inches (8277 cc)
3. 356-T6 aluminum alloy block with cast-iron liners, aluminum alloy cylinder heads
4. Bore x Stroke: 4.03 inches x 3.96 inches (102.4 x 100.6)
5. Two pushrod-actuated overhead valves per cylinder with roller-type hydraulic lifters
6. Sequential, multi-port electronic fuel injection with individual runners
7. Compression Ratio: 9.6:1
8. Max Engine Speed: 6000 rpm
9. Fuel Requirement: Unleaded premium, 93 octane (R+M/2)
10. Oil System: Dry Sump; takes 8 quarts Mobil1 10W30 Synthetic
11. Cooling System: Twin aluminum radiators mounted atop engine intake manifolds, force-fed from front-mounted, belt-driven turbine fan.
12. Takes 11 quarts of antifreeze.
13. Exhaust System: Equal-length tubular stainless steel headers with dual collectors and central rear outlets.

Suspension
Front:
Outboard, single-sided parallel upper and lower control arms made from polished billet aluminum. Mounted via ball join t to aluminum steering uprights and hubs. Five degrees caster. Single, fully adjustable centrally located coil-over damper (2.25-inch coil with adjustable spring perch); pullrod and rocker-actuated mono linkage. Center-lock racing-style hubs.

Rear:
Hand-fabricated box-section steel inboard swing arms, incorporating “hydral-link” lockable recirculating hydraulic circuit parking stand. Single fully adjustable centrally located Koni coil-over damper (2.25-inch coil with adjustable spring perch); pushrod and rocker-actuated mono linkage. Center-lock racing-style hubs

Performance
0-60 mph: 2.5 seconds (est.)
(Some estimate 1.9)
Top Speed: 300+ mph (est.)

Dimensions
Length: 102 inches
Width: 27.7 inches
Height: 36.9 inches
Wheelbase: 76 inches
Seat Height: 29 inches
Weight: 1,500 lbs.
Track, Front: 8.75 in
Track, Rear: 10 in
Weight Dist: 49F/51R
Ground Clearance: 3 in
Fuel: 3.25 gallons

Transmission
Manual, foot-shifted two-speed
Aluminum-cased two-speed, sequential racing-style with dog ring, straight-cut gears
Gear Ratios: 1st 18:38; 2nd 23:25
Clutch: Double-disc, dry-plate with organic friction materials, hand lever actuated with assist
Final drive: Dual 110-link motorcycle-style chains
Front Sprockets: 14 teeth
Rear Sprockets: 35 teeth
Longitudinal, centrally mounted engine, rear-wheel drive layout; monocoque construction, engine is central, stressed member. Body of billet aluminum.

Price
$555,000