Text from the website:
The engine that used is a rotary air engine. It is the invention of the Melbourne engineer Angelo Di Pietro. The engine is compact, lightweight and powerful and runs on compressed air from two compressed air tanks on the bike. It revs up to 3,000 RPM, and because of this, the inventors didn’t need any gear box on the bike. There is only one gear, which is just a sprocket bolted directly to the axis of the engine and chained to the rear wheel.

Compressed air is stored in the bike’s on-board carbon fiber tanks. Once mass produced, the bike will have solar panels that will generate enough energy to compress air and store it in the bike’s tanks, which will increase its range indefinitely.

As the bike was designed as a speed record setter, there is no headlight, brake light or indicator lights on the bike. Instead, there were three little cameras fitted at the front and tail on the bike that are used to record the run. The body works were designed to be aerodynamic and lightweight, and it will be made of fiber glass or carbon fiber.

Designer : Edwin Conan

Designer : Demetrius Tanase

Designer : Mac Funamizu

The economical mass-production design of e-Bin includes high quality carbon fiber sheets, making it strong, durable, lightweight and suitable for all weathers. It doesn’t require an electricity source since it uses solar power for its touch screen lid. An administrator needs to be logged in to customize the different settings of the smart bin.

Designer : Baharash Bagherian

(Click to view bigger image)

Designer : Xiao-Fang Shen and Nikolai Ruola

Designer : Chen Chun Tung

Designer : ArchitectureAndVision via Inhabitat

Designer : Muhammad Imran

Gosha says :

“A hybrid airship is actually a hybrid between an airship and an airplane, deriving roughly two thirds of its lift from buoyancy of lighter than air gas, and the remaining third from aerodynamic lift generated by wings. The outcome is a craft which when loaded is only slightly heavier than the air around it, and therefore requires very little effort to become airborne and even less effort to cruise comfortably at around 120mph.

The Airship One has a semi-rigid construction, Aluminum and fiber composite frame supporting PU fabric ballonets filled with lighter than air, non flammable Helium gas. Propulsion is provided by four DC electric motors, which during cruise receive their energy from solar panels mounted on the hull and wings, and during takeoff also from a bio-diesel generator. The ship can take off and land vertically, with no need for a runway of any kind.

With its 30-ton cargo capacity and a double-deck passenger compartment which can accommodate some 25 passengers with levels of comfort that by far exceed those of the most luxurious airliner.

While currently only a concept, I strongly believe that in the not too distant future machines like the Airship One will offer a quiet, efficient and eco-friendly alternative to air transport.”

Designer : Gosha Galitsky

This concept has been driven from the need for zero-pollution, efficient and affordable cars for the future community and enjoying the freedom of a ride. The ATNMBL is designed as a self-driving car with artificial intelligence which arrive to you with just a phone call. The standing-height entrance has an electric sliding glass door and upon entering, you will be asked for your desired destination. The comprehensive and innovative voice recognition system of this vehicle along with a touch screen remote and slide up display, it can offer a wide range of tour planning, detailed performance setting and enjoyable ride sharing.

The overall arrangement of the interior of ATNMBL is very much familiar with conventional living room sitting including side chair, a couch and a low table. Up to seven passengers can sit towards each other and can see outside through large floor-to-ceiling windows on both sides. From outside, this vehicle looks like micro-architecture with a large window, pitched room and asymmetrical shape from every view without any reference to past automobile designs.

A considerable amount of typical car space is blocked with the engine and drive train, while, the mechanical components of ATNMBL are simplified and densely packed, providing more interior space. Each wheel contains electric motors which provide all-wheel drive. The power storing mechanism is located beneath the floor; moreover, alternative solar energy can be obtained from the roof-top solar panels. The front and rear end contains an array of tail lights, headlights and sensors.

Designer : Mike and Maaike via Core77