Text from the website:
The engine that used is a rotary air engine. It is the invention of the Melbourne engineer Angelo Di Pietro. The engine is compact, lightweight and powerful and runs on compressed air from two compressed air tanks on the bike. It revs up to 3,000 RPM, and because of this, the inventors didn’t need any gear box on the bike. There is only one gear, which is just a sprocket bolted directly to the axis of the engine and chained to the rear wheel.

Compressed air is stored in the bike’s on-board carbon fiber tanks. Once mass produced, the bike will have solar panels that will generate enough energy to compress air and store it in the bike’s tanks, which will increase its range indefinitely.

As the bike was designed as a speed record setter, there is no headlight, brake light or indicator lights on the bike. Instead, there were three little cameras fitted at the front and tail on the bike that are used to record the run. The body works were designed to be aerodynamic and lightweight, and it will be made of fiber glass or carbon fiber.

Designer : Edwin Conan

Designer : Demetrius Tanase

Victor says about Mytho :

The MYtho, is a concept car designed to be simple, but at the same time sophisticated. With inspiration from vintage cars, like the woodies, i was able to find a sustainable design solution for the side panels, which are made of compressed wood also the whole body is made of aluminum, in order to be recyclable.

The “tech” factor is in it’s OLED displays, build-in solar cells, and HUD display’s for the driver.

The form of the car is very simple, like the hot rods from the 30’s. The open wheel design, the huge front grill, and the low profile of the car, are just some indicators of this.

Designer : Victor Uribe Chacon

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Gosha says :

“A hybrid airship is actually a hybrid between an airship and an airplane, deriving roughly two thirds of its lift from buoyancy of lighter than air gas, and the remaining third from aerodynamic lift generated by wings. The outcome is a craft which when loaded is only slightly heavier than the air around it, and therefore requires very little effort to become airborne and even less effort to cruise comfortably at around 120mph.

The Airship One has a semi-rigid construction, Aluminum and fiber composite frame supporting PU fabric ballonets filled with lighter than air, non flammable Helium gas. Propulsion is provided by four DC electric motors, which during cruise receive their energy from solar panels mounted on the hull and wings, and during takeoff also from a bio-diesel generator. The ship can take off and land vertically, with no need for a runway of any kind.

With its 30-ton cargo capacity and a double-deck passenger compartment which can accommodate some 25 passengers with levels of comfort that by far exceed those of the most luxurious airliner.

While currently only a concept, I strongly believe that in the not too distant future machines like the Airship One will offer a quiet, efficient and eco-friendly alternative to air transport.”

Designer : Gosha Galitsky

This concept has been driven from the need for zero-pollution, efficient and affordable cars for the future community and enjoying the freedom of a ride. The ATNMBL is designed as a self-driving car with artificial intelligence which arrive to you with just a phone call. The standing-height entrance has an electric sliding glass door and upon entering, you will be asked for your desired destination. The comprehensive and innovative voice recognition system of this vehicle along with a touch screen remote and slide up display, it can offer a wide range of tour planning, detailed performance setting and enjoyable ride sharing.

The overall arrangement of the interior of ATNMBL is very much familiar with conventional living room sitting including side chair, a couch and a low table. Up to seven passengers can sit towards each other and can see outside through large floor-to-ceiling windows on both sides. From outside, this vehicle looks like micro-architecture with a large window, pitched room and asymmetrical shape from every view without any reference to past automobile designs.

A considerable amount of typical car space is blocked with the engine and drive train, while, the mechanical components of ATNMBL are simplified and densely packed, providing more interior space. Each wheel contains electric motors which provide all-wheel drive. The power storing mechanism is located beneath the floor; moreover, alternative solar energy can be obtained from the roof-top solar panels. The front and rear end contains an array of tail lights, headlights and sensors.

Designer : Mike and Maaike via Core77

These wind/solar powered street lamps are fitted to locally made, usual galvanized steel poles and can be easily swapped with previous street lamps. The turbines can be either a horizontal axis wind turbine or a 2nd generation 300W vertical axis wind turbine. Two solar panels are mounted on the side of the pole that is capable of producing up to 80W of power.

The lamps are able to produce the maximum power of 380W if the sun is shining and at the same time the wind are blowing as well. It will save the excess generated energy in a battery that will supply the required power to lighten the high efficient LEDs all through the night. Since not every location and project is not the same, the designers have focused on the components – the LED lights, wind turbine, solar panels, battery storage and tower height are all can be easily balanced to fit best in a particular project.

The hybrid LED lamps looks like a commissioned art piece instead of the traditional industrial looking street lamps and the decorations on the pole can be customized as per the buyer’s requirement. This project surely will help the streets becoming self sufficient with street lamps that can generate the power they require.

Designer : Urban Energy via Inhabitat

Designer : Orange

Designer : Tryi Yeh

[Press Release]

MIT unveils EyeStop: an iPhone‐like interactive bus stop for the City of Florence

May 14, 2009. MIT architects and engineers have unveiled EyeStop, an interactive bus stop designed for the city of Florence. On Saturday 16 May the project will be presented officially at the Genio Fiorentino by the President of the Province of Florence Matteo Renzi (dubbed ‘The Italian Obama’ by TIME Magazine).

EyeStop, developed by MIT’s SENSEable City Lab, is an exploration into the next generation of smart urban furniture; it aims to enrich the city with state of the art sensing technologies, interactive services, community information and entertainment. The project is partially covered with touch sensitive e‐INK and screens, so that it can deliver information to people seamlessly. Users can plan a bus trip on an interactive map, exchange community‐relevant information on a digital message board, surf the web, monitor their real time exposure to pollutants and use their mobile devices as an interface with the bus shelter. “Interacting with EyeStop could change the access to urban information in a similar way to how the iPhone has changed our mobile life” commented Carlo Ratti, Head of the SENSEable City Lab at MIT.

At the touch of a finger users can indicate their desired destination; the system will then display the shortest bus route from where they are and the position of all relevant buses real‐time. The EyeStop will glow at different levels of intensity to signal the distance of an approaching bus. Riders and passers‐by can also post ads and community announcements to an electronic bulletin board placed on the bus stop, enhancing its functionality as a public space ‐ a place to gather and exchange community relevant information.

In addition to displaying information, the bus stop also acts as an active environmental sensing node, powering itself through sunlight and collecting real time information about air quality and the urban environment. “EyeStop is an experiment into urban computing: it may be considered an “info‐tape” that snakes through the city, rising up like a pole or cropping out of the sidewalk like a shelter. It senses information about the environment and distributes it in a form accessible to all citizens” – commented project leader Giovanni de Niederhousern.

A generative parametric model produces a unique design for each bus stop, providing both optimal sheltering for users and maximum sunlight exposure for direct photovoltaic powering. Unlike the typical mass‐produced bus stop, EyeStop is designed to fit the physical characteristics of its surroundings, with each unit being slightly different from the others. Furthermore, simple materials like shiny steel, extra clear glass and gray local stone (pietra serena), together with its minimalist design, serve to optimize how it blends into the historic urban fabric of Florence.

“Since the Renaissance, there has been an interplay between the physical form of the city (urb) and its citizenship (civitas),” added Carlo Ratti. “Today’s technologies are adding new possibilities to that age‐long relationship, thanks to the addition of digital information to physical space. It is as if a new materiality were emerging in architecture, with the seamless blending of bits and atoms…”

EyeStop was developed at the SENSEable City Laboratory by Giovanni de Niederhousern, Shaocong Zhou, Assaf Biderman and Carlo Ratti, in collaboration with the Province of Florence and the local public transportation authority ATAF.

Designer : Giovanni de Niederhousern, Shaocong Zhou, Assaf Biderman and Carlo Ratti via Core77