Text from Adam :
There are over 400,000 reported drownings and 8 – 10 times as much near drowning experiences worldwide every year. In the UK there are 500 annual drownings. These figures have remained the same for nearly 20 years which tells us that any current equipment and practice is not having the required impact to reduce these numbers.

I have been a beach lifeguard for a number of years and further primary and secondary research has shown that there are a number of key problems that reduce the survival rate of beach users.
These problems are:

• Slow response time
• Surveillance
• Lifeguard safety
• Human limitation of lifeguards

From this research it was decided to look to the future to see what could potentially be new directions for beach safety equipment, this design is therefore based for the year 2020.

The design process was in close collaboration with the BSA (British Surfing Association) headquarters in Newquay (UK). Starting with brainstorming where no idea was a bad idea, followed by concept generation and a wide variety of modeling and system/ scenario testing, the design took innovation from nature, new and existing technologies and user testing.

Explanation of final design

The ‘Mantra’ lives on the sea bed during peak seasons just off the coast of beaches; it uses small hairs on its surface to collect and store energy from tides and waves (called ‘Super Cillia Skin’). It detects distress and drowning using electro sensors coupled with sonar which even today are highly sensitive, for example heartbeats and movements can easily be monitored. When a casualty is detected it swims up to 15mph using SMAs in the wings. The victim is carefully picked up onto an inbuilt stretcher where they are carried on top the water using hydrofoils and impellers. The ‘Mantra’ is always in constant communication with lifeguards and so is met at a specific beach location by lifeguards and ambulances where an EAP is in place and the stretcher is removed without disturbing the patient, who in the worst case scenario may have neck injuries.

Stretchers are replaced and the ‘Mantra’ can assume its position at sea once more. The whole process is estimated to take under 2 minutes.

The final design as can be seen from images, uses biomimicry from a manta ray for many reasons –

• Large flat surface area for all weather stability
• Excellent turning circle and manouverability
• Excellent strength to weight ratio
• Low energy travel
• Considered as a non aggressive creature/ form

Advantages of ‘Mantra’:

• Removal of contact with bodily fluid
• Safety of lifeguards
• Immediate response time
• Completely automated
• Better for spinal and other injuries
• Aesthetics
• Function
• Sustainable

Designer : Adam Scott

Designer : Mingoo Kim, Yunjin Chang, and Sueun Park

Text from Teknokat Marine:
tubiQ is a modular concept that combines the dynamics and elegance of a boat with a refined living area on at least two levels. A tubiQ is made up of various interchangeable modules which can be fitted and connected to each other in many different ways. Within limits the tubiQ can be designed in full by the customer (length, height, interior design and the number and sizes of the rooms).

tubiQ: design your floating life!
On demand the tubiQ can be equipped with state of the art electric engines and solar panels. This, combined with a water system that represents the finest level of liquid filtration, makes the tubiQ totally self supporting. tubiQ makes it possible to $enjoy your floating life anywhere you wish.

tubiQ is designed by Marcello Ligabue with Daniele Gibertoni, produced by Teknokat Marine S.r.l. and will be on sale from autumn 2009 in two basic versions: tubiQ48 (one deck) and the tubiQ59 (two decks). The tubiQs can be delivered fully furnished or casco with a price that varies from 240.000 € to 590.000 € ex VAT.

For more information about tubiQ here : http://www.tubiq.eu

Designer : Marcello Ligabue and Daniele Gibertoni

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Click the image for bigger view

Designer : Anthony Mapstone

Tribons are designed as digital mentors, that support kid’s personal interests and show pathways to boost knowledge and development of skills. Moreover, it offers experiences and information, and make possible the understanding and participation in environments. By using Tribons, an urban child would be introduced to the natural and biological world, and similarly, a rural child can enhance their knowledge about the urban landscape. The accessories developed to comprise an earpiece that is controlled by a spontaneous 3D interface that projects various educational materials and features a safety system that allows parents track their children. Not only that, this gadget includes an additional medical module that offers surveillance of the wearer’s health parameters that will take care in case of chronic sickness and the probability of injuries.

Designer : FrogDesign

Designer : Louis Filosa

The angular bodywork of this vehicle takes inspiration from both superbikes and modern architecture which results this unique vehicle, from both in aesthetic aspects and highly functional body panel mechanism. The body panels are independently attached onto the vehicle with hex-head bolts and can be replaced easily when damaged. The tires were designed to form a contrast by combining digital technology and dune buggy paddle tires, and both the alloys and tires are interlocked to create a strong image.

Raptor is based on an exposed carbon fiber chassis that provides closer sense of speed to the occupants, whilst providing comprehensive safety. The cantilever roof offers an unrivalled view from the front seat, giving a close panoramic view of the landscape. The vehicle is powered by Lithium-Titanate batteries that can be recharged through a standard wall socket or dedicated high powered outlets. It features unique “hot-swap” battery system that allows the user to replace the batteries easily and quickly.

Designer : Ryan Skelley

Text from designers :
The idea is to make an amphibious vehicle that can be used on land, ice and on water. Inside each wheel is an electric engine, which has energy from batteries. To realize these points the vehicle needs to be adaptable to the environment and use. This problem is solved by a specially designed tire.

Intelligent wheel system
The wheel exists of movable parts which can increase traction or even transform in a paddle wheel to propel the vehicle in the water. The wheel is controlled by terrain sensors which decide when more or less traction is needed. This system provides the vehicle with more safety because it can answer to different kind of terrains.

Renting concept
When making a vehicle that can do almost anything it will be certain it is going to cost a lot of money. For students to be able to afford it, there could be a renting system. For example for 5 euros a day the tourists and students could rent the vehicle. Cheap price could be achieved by sticker advertising.

Designer : Janne Leppänen, Tuulia Miettinen, Roope Kolu, Tiemen Stelwagen, and Jaap Van Der Voort

Designer : Meytal Zemach