Text from Adam :
There are over 400,000 reported drownings and 8 – 10 times as much near drowning experiences worldwide every year. In the UK there are 500 annual drownings. These figures have remained the same for nearly 20 years which tells us that any current equipment and practice is not having the required impact to reduce these numbers.

I have been a beach lifeguard for a number of years and further primary and secondary research has shown that there are a number of key problems that reduce the survival rate of beach users.
These problems are:

• Slow response time
• Surveillance
• Lifeguard safety
• Human limitation of lifeguards

From this research it was decided to look to the future to see what could potentially be new directions for beach safety equipment, this design is therefore based for the year 2020.

The design process was in close collaboration with the BSA (British Surfing Association) headquarters in Newquay (UK). Starting with brainstorming where no idea was a bad idea, followed by concept generation and a wide variety of modeling and system/ scenario testing, the design took innovation from nature, new and existing technologies and user testing.

Explanation of final design

The ‘Mantra’ lives on the sea bed during peak seasons just off the coast of beaches; it uses small hairs on its surface to collect and store energy from tides and waves (called ‘Super Cillia Skin’). It detects distress and drowning using electro sensors coupled with sonar which even today are highly sensitive, for example heartbeats and movements can easily be monitored. When a casualty is detected it swims up to 15mph using SMAs in the wings. The victim is carefully picked up onto an inbuilt stretcher where they are carried on top the water using hydrofoils and impellers. The ‘Mantra’ is always in constant communication with lifeguards and so is met at a specific beach location by lifeguards and ambulances where an EAP is in place and the stretcher is removed without disturbing the patient, who in the worst case scenario may have neck injuries.

Stretchers are replaced and the ‘Mantra’ can assume its position at sea once more. The whole process is estimated to take under 2 minutes.

The final design as can be seen from images, uses biomimicry from a manta ray for many reasons –

• Large flat surface area for all weather stability
• Excellent turning circle and manouverability
• Excellent strength to weight ratio
• Low energy travel
• Considered as a non aggressive creature/ form

Advantages of ‘Mantra’:

• Removal of contact with bodily fluid
• Safety of lifeguards
• Immediate response time
• Completely automated
• Better for spinal and other injuries
• Aesthetics
• Function
• Sustainable

Designer : Adam Scott

[Press Release]

DRAGONFLY, A METABOLIC FARM FOR URBAN AGRICULTURE

2009 : 800 MILLION OF URBAN FARMERS FOR RESPONSIBLE ECO-CITIES

The world of fast-food and frozen food is over! The urban keen interest of the beginning of our Century turns toward the garden flat bringing back the countryside in our overcrowded cities fighting from now on for a community urban agriculture able to contribute to the durability of the city and to rethink the food production.

On the roofs, terraces, balconies, in the hollow of the non-built public spaces, in the interior yards and the suspended greenhouses, the eco-warrior aspires to escape from its competitive and consumeristic universe imposed by the laws of the market. He desires to cultivate its immediate landscape so as to better take root in the ground by creating his own ecologic and alimentary biodiversity. The consumer becomes from then on producer and the garden inhabitant !

From the Parisian « worker gardens » to the « community gardens » of New York going though Muscovite « vegetable squares », eight hundred million of urban farmers, i.e. more than one human being out of ten, consume nowadays chlorophyllous products from these cosmopolitan kitchen gardens. These new gardens, aware of the emergency to reduce our fuel consumption and the necessity to modify our behaviour facing the climatic changes, decrease thus their environmental impact and build eco-responsible cities on a community way.

2025 : 5.5 BILLION OF CITY SLICKERS FACING THE FOOD CHALLENGE OF THE 21ST CENTURY

According to the PNUD (Programme of the United Nations for the Development), the worldwide urban population will go from 3.1 billion of inhabitants in 2009 up to 5.5 billion of inhabitants within 2025. Looking for a positive energetic assessment, the contemporary city aims within fifteen years at producing cleanly and intensively more energy than it consumes so as to pack this urban exodus! It develops therefore the urban agriculture to become food self-sufficient by recycling at the same time its liquid waste by phyto-purification, its solid waste in fertilizers by composting and by producing energy by biomass, photovoltaic cells and other renewable energies (thermic solar, photovoltaic solar, wind, tide-turbine energies…).

In order to avoid the asphixiation of the planet and the feeding of its 9 billion of inhabitants within 2050, it deals thus with reinventing the traditional energetic pattern between the city and the countryside between western countries, emerging countries and developing countries. This sums up as following: on the one hand import of natural and food resources, and on the other hand export of waste and pollution. The ecologic city aims at reintegrating the farming function on the urban scale by emphasizing the role of the urban agriculture in the use and the reuse of natural resources and biodegradable waste so as to close the loop of ecologic flows.

The urban agriculture can feed the city without any pesticide or chemical fungicide (whose toxicity is proved on the human being : cancer, sterility…), and make it less food dependant of its backcountry or other regions of the world. Organising the distribution of fresh products in short circuits, that means linked directly with the consumer, the urban agriculture complete thus the traditional agriculture. In addition to the nutritive quality of the produced and consumed food, the urban agriculture is also a growth lever of the urban unemployment market and the local economy. It is used directly as a social link in the conciliation of the primary needs of the newcomers with the challenge of their integration in the life of the city, fighting thus against poverty and exclusion. On the sanitary level, this farm approach presents also an interesting potential for the decontamination of polluted grounds and undergrounds as well as for he purification of the polluted atmosphere in CO2.

Due to the fuel crisis and climatical change, the rural agriculture of the western countries must answer to the worldwide food crisis of the developing countries and mainly Africa. Its role is from now on to produce (with an increase estimated of 60% within 2050) all the foodstuffs transportable by boat such as cereals or corn. This is based on the evolution of the science and the most advanced biotechnologies. In addition to this nutritious role, the rural agriculture is newly challenged to recycle its own culture rebus for the green chemistry in order to produce the bio fuel called “second generation fuel” using the energy of non-consumable materials from the plants, that means fibres such as celluloses.

DRAGONFLY, A NOURISHING VERTICALY CULTIVATED CENTRAL PARK

The architecture has to be in the service of this new agriculture and to design this new social desire in this context of ecologic mutation and food autonomy! The Dragonfly project suggests therefore building a prototype of urban farm offering around a mixed programme of housing, offices and laboratories in ecological engineering, farming spaces which are vertically laid out in several floors and partly cultivated by its own inhabitants. This vertical farm sets up all the sustainable applications in organic agriculture based on the intensive production varied according to the rhythm of the seasons. This nourishing agriculture is furthermore in favour of the reuse of biodegradable waste and the keeping of energy and renewable resources for a planning of ecosystemic densification.

Floor by floor, the tower superposes not only stock farming ensuring the production of meat, milk, poultry and eggs but also farming grounds, true biological reactors continuously regenerated with organic humus. It diversifies the cultivated varieties to avoid the washing of stratums of soft substratum. Thus, the cultures succeed one another vertically according to their agronomical ability to provide some elements of the ground between the essences that are sowed and harvested. The tower, true living organism, becomes thus metabolic and self-sufficient in water, energy, and bio-fertilizing. Nothing is lost; everything is recyclable to a continuous auto-feeding!

A BIONIC AND ENERGETICALLY SELF-SUFFICIENT ARCHITECTURE
The architecture of Dragonfly prototype suggests reinventing the vertical building (that outlined the urbanistic booming of New York City since the 19th Century) as structurally and functionally as ecologically and energetically.

To ensure the social diversity and a permanent life cycle (24h/24) in the tower, the mixed programmation is mainly laid out around two poles of housing and work places. Around housings, offices and research laboratories as well as the most private to the most public agricultural and leisure spaces are designed in gardens, kitchen gardens, orchards, meadows, rice fields, farms and suspended fields. The distribution of flows is made around a true safe spine spreading in loop the numerous elevators, the goods elevators and stair wells serving all the levels by separating simultaneously the inputs and the outputs recycled from plants, animals and human beings.

Architecturally, the functional organisation is represented by two oblong towers symetrically arranged in pair around a huge climatic greenhouse that links them and deploys itself between two crystalline wings. These very light wings in glass and steel retake the loads of the building and are directly inspired from the structure of the dragonfly wings coming from the family of “Odonata Anisoptera” whose transparent membrane is very finely nervured. Two inhabited rings buttress around these wings. Their organically chiselled exo-structure accommodates the inter-climatic spaces that receive the agrarian cultures. They buttress.

The whole set forms «double layer» architecture in bee nest mesh that exploits the solar passive energy at its maximum level, by accumulating the warm air in the winter in the thickness of the exo-structure, and by cooling the atmosphere by natural ventilation and by evapo-perpiration of the plants in the summer. Protecting thus the cultures from climatic changes in New York (from -25.5°C in the winter to +41°C in the summer), these plug spaces are useful to reflect on the agriculture not anymore in terms of surface area but really in terms of volume. Actually, whereas grounds nourish orchards, each wall and each ceiling are metamorphosed into three-dimensional kitchen gardens. The interior frontages of the housing and offices throw towards the skyline of New York the cantilever of their hydrophonic balconies with hexagonal section thanks to what it multiplies the culture layers by floors. The vegetation abounds, the earth is swarming of insects and animals are freely brought up in holding tanks by urban consumers with low income. The architecture becomes eatable!

Designer : Vincent Callebaut Architect

Text from Yiftach :

SeaO2 is an experimental ecological housing project. The project poses an alternative to current plans for Tel Aviv North West coastal district. SeaO2 demonstrates vast use of cutting edge computer software, some being used in the aerospace industry, in order to improve building performance and to ensure the existence of a sustainable urban environment with a minimal ecological footprint. The project final form is a consequence of a scientific approach that calculates numerous of elements: the sun orbit, wind conditions, maximum open scenic views, very high density and more, all in a free-form organic manner.

Advanced Computer Simulations ensure the project’s credibility. The project’s unique morphology enables: optimized solar reception for heating at winter time, self-shadowing and solar reception for electricity generation at summer time, natural lighting, optimized natural ventilation, open looks to the natural coastal environment, public green spaces, rain collection and more. Various passive mechanical systems complement the basic morphology, enable better performance and create an energy efficient, environmentally friendly housing project

Designer : Yiftach Ben Meir

Text from the designer :

Natura Levo is a small wind, vertical axis wind turbine. It is a 66″ tall turbine that contains two non-traditional blades that can catch wind from any direction. These blades are fastened within a unique steel component which also houses the tapered bearings allowing the blades to spin with little friction. The center axis is a beautifully formed stationary shape that mounts to existing architecture. The intended architecture can be anything ranging from a telephone pole, to an old chimney mount, to a flag pole in a residential back yard. Natura Levo is intended to harness energy from a renewable energy source while co-existing with its natural surroundings. Natura Levo should be so beautiful that it raises awareness of natural energy by admiration of its design.

Natura Levo is made primarily of Novomer plastic, with necessary steel bearings, adjustable cylinder mount, and small housings. The steel components are machined, and with the exception of the housings, these are standard forms. The remaining steel pieces would be machined in 3 separate entities and welded together. The axis is Novomer and injection blow molded; the blades are a bit more involved. They would be formed in 4 pieces and snapped together. The nature of the rotation would strengthen the fastened segments by using the natural force. These 4 pieces would be injection molded.

Designer : Laura Sink

The canopies (which look more like giant duck feet) have solar cells on top. The large handles on the base ensures that the canopy can be rotated by teachers or pupils to get the most efficient orientation from the sun throughout the day. The LED displays, communicate the energy generated and if the device needs to be turned around.

Thus this government funded initiative, which in partnership with VEIL (i.e. Victorian Eco-Innovation Lab), is a possibility for future to integrate solar-energy harvesting technologies into a form which is pragmatic (i.e. providing shade & energy), education and evocative.

Designer : Buro North via IGreenSpot via Dezeen

A monthly fee is charged to the customer so that they can access to the EVO computing service. There is no significant change in the computing experience, other than the replacement of their current PC with the sleek, compact EVO Client.

Basically it consists of 2 main parts: the EVO Client module and EVO Base unit. A PC board with a low power processor, wireless card, RAM, flash memory, and a unique circular EVO docking connector is what constitutes the Client. To function, the client must be docked to a Base unit which supplies power and connectivity to the EVO Server. With primary goal of the EVO PC concept is to address all the key environmental issues associated with today’s PC, EVO PC is PC in Power Saver mode!

Source : IGreenSpot