The speaker pair remains attached with one another and can be detached with easy twist and lift. The connecting cable contains two mini USB ports that go to both speakers, one USB 2.0 goes to the PC for charging and the 3.5mm audio output jack to the source of music, whether it is an iPod, Mac or usual MP3 players. Both the speakers have LED lights to indicate it as switched ON. The pop open Bass Xpansion System mimics the resonance of a powerful sub-woofer and enhances the style of these speakers.

Difference between these speakers and X-Mini 2nd Generation is quite clear. First one is X-Mini Max II comes in two pieces, whereas X-Mini 2nd Generation offers a single speaker only. Another remarkable difference is the volume controller is embedded with the connecting cable in X-Mini Max II, on the other hand, you can find it on the body of X-Mini 2nd Generation. Moreover, the tiny connector cable in X-Mini 2nd Generation that remains tucked with the base is absent in X-Mini Max II. And finally, the size is also an important factor about these two. Max II is larger in size, therefore, it is able to produce louder sound as well. Aside from the identical shape, there are few similarities among them too, such as both of them are using 40mm driver and features “Buddy Jack” design, allowing connecting many speakers like a chain. So, when buying one of them, you should consider the portability along with your need of greater sound.

The making of these speakers seem quite strong to me. I can feel that it is strong enough to survive minor fall in the ground or any rough surface. There are rubber soles under the base to make it slip-resistant. Overall, I think as a portable mini speaker set, the X-Mini Max II has it all.

[Buy it here]

From : X-Mini

Horizon ploughs straight through the crest instead riding over it which reduces vertical acceleration drastically. Only with the SkySail, Horizon can run at 24 knots max and coupled with the 2 5000hp engines, it will top out at 45 knots.

Designer : Barnaby Heseltine

Designer : Mikhail St-Denis

[Press Release]

Ancona, Italy. September 22, 2009. WHY, Wally Hermès Yachts, today unveils a revolutionary
approach to cruising in motor yachts with the presentation of a full size model of its first born, an
innovative 58 metre-long 38 metre-wide yacht, in Ancona’s shipyard.

Wally Hermès Yachts: a joint-venture.
WHY is the result of the joint-venture signed in June 2008 between Hermès and Wally, to develop a new type of motor yacht redefining the art of living on the sea. The iconic Parisian house and the iconic Monaco yacht brand formed an equal partnership whereby each company is fully involved in all aspects of the conception and design of each project. Pierre-Alexis Dumas, Artistic Director of Hermès says : “When we met, in autumn 2007, Luca Bassani Antivari, President of Wally had thought about asking Hermès to accessorise the interior of one of his boats. I was impressed by the daring of his projects. My instinct was to get on board with him and go and seek out new territories in yacht design, but I had no interest in speed.”

Luca Bassani Antivari explains: “What I’ve always liked about Hermès, aside from its intrinsic quality, is its audacity and radicalism; its desire to go beyond trends, to make no compromises and to maintain the authenticity of the house. Wally shares the same values, ‘Hermès-on-Land’, ‘Wally-on-Sea’: inevitably our paths had to cross.”

WHY 58×38
The common values of the two brands have led to a first yacht that offers an unparalleled living space at sea. WHY was developed to give life to this concept assembling a team of dedicated talents in design, engineering, and naval architecture.

Then the tried and tested Norwegian Ramform hull characterised by exceptional and unprecedented stability and volume and spotted by Luca Bassani Antivari, revealed itself as the ideal choice to be adapted to the WHY 58×38 project.

Following this unique adaptation, the decks and the interiors were developed in accordance with the fundamental credo of WHY, ‘form-equals-function’. Thus were born other innovations in the world of mega yachts: patios generously flooding the interior with natural light, photovoltaic panels on the glass hull sides, as well as on the roof opening, like Venetian blinds, a 25 metre-long forward end swimming pool, and a 36-metre aft deck beach.
WHY 58×38 offers comfort, privacy, stability, space, independence and sustainability.

Sustainability
“We are very interested in creating a yacht that will have a low environmental impact”, says Pierre-Alexis Dumas. “Its relationship with the sea must be respectful and easy. WHY intends to offer a new way of moving over water by creating an innovative way of managing and recycling its sources and uses of energy.”
“If you want to go totally ecological, it’s only sailing yacht. The reality is that today, 90 % of the market is powerboats, echoes Luca Bassani Antivari. Our aim is to reduce diesel consumption per year and per yacht: 20 to 30 % for propulsion and 40 to 50 % for generation.”

Thanks to its specific hull, WHY 58×38 requires less power at cruising speed than a boat of equal size. Its diesel-electric propulsion is the most efficient motorisation today, and the surface of the photovoltaic panels, almost 900 square metres, covers most of the boat’s auxiliary system needs.

WHY Research and Development plan to optimize this project’s energy consumption by improving the isolation of the yacht and the heat recovery of its engines, and is also investigating the latest wind energy production and wind propulsion system technologies.

In comparison to a yacht of the same size, WHY 58×38 has been conceived to reduce drastically its energy consumption, saving up to 200 tons of diesel per year.
The WHY R & D program includes tank testing for hull stability in the SSPA facilities in Sweden, and the construction of a full-scale mock-up in order to allow the design team to fine tune the living areas correctly in accordance with the hull’s unique shape.

“The WHY 58X38 yacht looks very unfamiliar but it remains on a human scale. Space is the greatest luxury on the sea, but I believe the new luxury will be the time to enjoy it”, concludes Pierre-Alexis Dumas.

Designer : Pierre-Alexis Dumas, Luca Bassani Antivari, Gabriele Pezzini, and MauroSculli

Aside from being just a bio-reactor and a local renewable energy source, the Eco-Pod will also be a good research incubator where scientists can examine algae species and ways of fuel extraction, including innovative methods of using low energy consuming LED lighting for modifying the algae growth cycles. This module can easily be placed to various places around Boston, infilling empty sites, examining new proposals, and creating initiatives with other communities in order to meet the growing energy requirements.

Designer : Howeler + Yoon and Squared Design Lab

The economical mass-production design of e-Bin includes high quality carbon fiber sheets, making it strong, durable, lightweight and suitable for all weathers. It doesn’t require an electricity source since it uses solar power for its touch screen lid. An administrator needs to be logged in to customize the different settings of the smart bin.

Designer : Baharash Bagherian

(Click to view bigger image)

Designer : Xiao-Fang Shen and Nikolai Ruola

Designer : Chen Chun Tung

The 4 hydraulic legs of Landstorm can move independently and are providing great functionality by navigating over tremendously difficult terrain and raising itself up to reach the target. The use of these hydraulic drive-train attached with several powerful electric motors and powered by hydrogen fuel cell, have made the vehicle lightweight by removing the mechanical parts to impel the wheels. Moreover, it can be airdropped when the destination is far from the closest depot and then continue to reach the target on land.

The wheels of Landstorm are uniquely designed that feature small pods, allowing more grip on surfaces like loose dirt, mud or snow by increasing to compress surface area or just by using the edges to grip onto the surface. These are not just wheels, they feature a grapple gun or hook winch that lets the vehicle drag heavy debris or towing a standard vehicle. Once the Landstorm reaches the destination, the team will start rescuing and treating the survivors for emergency injuries.

The driver and navigator of Landstorm will have no problem finding out how far the destination is and how to get there by using the state of the art HUD technology along with a built in MultiSight camera (Infra Red, Night Vision and Cold Vision) powered with an advanced Computer AI. The heads up display features the most interactive information system which is controlled by the user’s neural patterns, which means, the information is controlled by the users thoughts. The rest of the cabin remains free for storage compartments for various equipments. There is a small backup unit that will start working if the main power source fails for any reason.

Designer : Peter Spriggs

From the website:
Bushbunker represents a concept that has been designed from scratch specifically as a bushfire bunker, and comprehensively engineered to withstand the severe environmental conditions that a major bushfire produces. It has been designed for maximum survivor ability no matter the intensity or type of fire.

A series of two fire doors is used to separate the entrance/storage area from the bunkers main interior to provide a fail safe, and to create an air lock which protects against the infiltration of radiant heat through the first steel fire door. This is an extremely important design feature, as some of the most severe burns to Black Saturday fire survivors were caused by radiant heat.

To outfit the interior, the design makes use of standard off the shelf components such as steel fire doors, steel frames and sealing, bench seating, compressed air cylinders, battery powered electric lighting, storage shelving, water drums, UHF radio and EPIRB, and fire blankets and first aid. This in turn allows for flexibility in the design, and reduces costs.

The Bushbunker has been designed to comfortably accommodate up to 6 adults for an extended period when equipped with compressed air cylinders. These air cylinders also have the additional feature of providing a positive internal air pressure inside the bunker making it impossible for noxious and poisonous outside gasses and smoke to enter.

Hanging above each seating area is a series of refillable standard 20 Litre water containers which provide a gravity fed source of clean water for drinking, cooling and first aid purposes.

Due to its standardized size and modular construction, and depending on the site conditions of a home, the Bushbunker can be specially incorporated into the structure of a house or home, free standing, set into an embankment or partially or totally buried underground.

From : Bushbunker