Designer : Vivek Sasindran

Designer : Siwei Liu

This concept device can be held in ways that is comfortable by the user and enables the utilization of the index finger and thumb. Most amazingly, this device can produce electrical energy by any kind of movement, even slight vibration persuades electricity, which is used to charge this device. More energetic interactions, such as, swinging the device repetitively between and around the index finger and thumb, gives a greater charge. The user can learn, develop and combine varieties of techniques for not only powering the device, but also increase the hand dexterity and coordination.

The track control section includes an electromagnetic inducer that generates an electric charge for the device from any kind of vibration or motion. The volume control segment includes all the major electronic modules of the device, including phono input, headphone output, memory storage unit and logic board. The volume control contains basic controls only and no screen, allows less energy requirement. The soft exterior casing of both main parts and beads provide easy grip and tactility, and is consists of thermoplastic polyurethane, which is an energy efficient material to manufacture and consequently, can be effectively recycled. The inner casing is made of stainless steel and provides protection to the electrical equipments and offers a tactile weight to the device. Aside from giving the device a unique form, the cable connects the two sections and transfer energy to all other components from the power supply.

Revealing the cable detach screws can be done by pulling out the soft outer casing. Unscrewing these will separate the entire device into different components that will let the user customize, repair and replace the components. Adjusting volume and track selection can be controlled by turning the end beads within the consequent end sections. The power and play or pause is controlled by clicking the beads into the sections.

Designer : Thomas Mascall

This concept has been driven from the need for zero-pollution, efficient and affordable cars for the future community and enjoying the freedom of a ride. The ATNMBL is designed as a self-driving car with artificial intelligence which arrive to you with just a phone call. The standing-height entrance has an electric sliding glass door and upon entering, you will be asked for your desired destination. The comprehensive and innovative voice recognition system of this vehicle along with a touch screen remote and slide up display, it can offer a wide range of tour planning, detailed performance setting and enjoyable ride sharing.

The overall arrangement of the interior of ATNMBL is very much familiar with conventional living room sitting including side chair, a couch and a low table. Up to seven passengers can sit towards each other and can see outside through large floor-to-ceiling windows on both sides. From outside, this vehicle looks like micro-architecture with a large window, pitched room and asymmetrical shape from every view without any reference to past automobile designs.

A considerable amount of typical car space is blocked with the engine and drive train, while, the mechanical components of ATNMBL are simplified and densely packed, providing more interior space. Each wheel contains electric motors which provide all-wheel drive. The power storing mechanism is located beneath the floor; moreover, alternative solar energy can be obtained from the roof-top solar panels. The front and rear end contains an array of tail lights, headlights and sensors.

Designer : Mike and Maaike via Core77

Designer : Felix Runde

Designer : Orange

How it works:
The Capshell is a medication storage device that records when medication was taken and alerts the user at the correct intervals programmed by the pharmacist. If not attended to, then via Bluetooth an SMS alert is sent out to the users phone.

The outer shell slides round, revealing the corresponding opening for the time of day. This eliminates the use of the pinch grip by enabling the medication to easily fall into the palm of the user’s ready hand.

The user reloads the Capshell daily by removing the inner capsule and replacing it with a new one. Each capsule holder has the name of the day on the circular end.

The memory chip in the casing records what time the case has been opened. This information is logged for reference so that the health care professional can monitor if needed. The following week, the user returns to the pharmacist to reload the containers and the pharmacist can check the data. The pharmacist checks whether the user has been able to access the medication and at what times, and whether the user has missed any intervals.

A doctor would also be able to check the device for the same purpose. The recording device in the product assists the doctor in keeping accurate patient records. If the patient’s symptoms have not improved with a prescription, the doctor can discover whether it is due to the choice of medication or if it because of incorrect medical adherence on the patient’s behalf.

Designer : Steven Grech

[Press Release]

MIT unveils EyeStop: an iPhone‐like interactive bus stop for the City of Florence

May 14, 2009. MIT architects and engineers have unveiled EyeStop, an interactive bus stop designed for the city of Florence. On Saturday 16 May the project will be presented officially at the Genio Fiorentino by the President of the Province of Florence Matteo Renzi (dubbed ‘The Italian Obama’ by TIME Magazine).

EyeStop, developed by MIT’s SENSEable City Lab, is an exploration into the next generation of smart urban furniture; it aims to enrich the city with state of the art sensing technologies, interactive services, community information and entertainment. The project is partially covered with touch sensitive e‐INK and screens, so that it can deliver information to people seamlessly. Users can plan a bus trip on an interactive map, exchange community‐relevant information on a digital message board, surf the web, monitor their real time exposure to pollutants and use their mobile devices as an interface with the bus shelter. “Interacting with EyeStop could change the access to urban information in a similar way to how the iPhone has changed our mobile life” commented Carlo Ratti, Head of the SENSEable City Lab at MIT.

At the touch of a finger users can indicate their desired destination; the system will then display the shortest bus route from where they are and the position of all relevant buses real‐time. The EyeStop will glow at different levels of intensity to signal the distance of an approaching bus. Riders and passers‐by can also post ads and community announcements to an electronic bulletin board placed on the bus stop, enhancing its functionality as a public space ‐ a place to gather and exchange community relevant information.

In addition to displaying information, the bus stop also acts as an active environmental sensing node, powering itself through sunlight and collecting real time information about air quality and the urban environment. “EyeStop is an experiment into urban computing: it may be considered an “info‐tape” that snakes through the city, rising up like a pole or cropping out of the sidewalk like a shelter. It senses information about the environment and distributes it in a form accessible to all citizens” – commented project leader Giovanni de Niederhousern.

A generative parametric model produces a unique design for each bus stop, providing both optimal sheltering for users and maximum sunlight exposure for direct photovoltaic powering. Unlike the typical mass‐produced bus stop, EyeStop is designed to fit the physical characteristics of its surroundings, with each unit being slightly different from the others. Furthermore, simple materials like shiny steel, extra clear glass and gray local stone (pietra serena), together with its minimalist design, serve to optimize how it blends into the historic urban fabric of Florence.

“Since the Renaissance, there has been an interplay between the physical form of the city (urb) and its citizenship (civitas),” added Carlo Ratti. “Today’s technologies are adding new possibilities to that age‐long relationship, thanks to the addition of digital information to physical space. It is as if a new materiality were emerging in architecture, with the seamless blending of bits and atoms…”

EyeStop was developed at the SENSEable City Laboratory by Giovanni de Niederhousern, Shaocong Zhou, Assaf Biderman and Carlo Ratti, in collaboration with the Province of Florence and the local public transportation authority ATAF.

Designer : Giovanni de Niederhousern, Shaocong Zhou, Assaf Biderman and Carlo Ratti via Core77

The Kyocera EOS can be used in its folded-up shape for simple phone calls, unfolds to reveal a wide screen, and we were excited to hear that the it derives its energy from human interaction. The more you use the phone, the more kinetic energy is turned into an electric charge through an array of tiny piezoelectric generators. In other words, you’ll never have to worry about leaving the house with a semi-charged cell phone again.

Designer : Susan McKinney via inhabitat

Photo by : Jeffrey Sass

But it may have become the harbinger of future mobile phone concept developments. With Pilotfish, a new development in the concept of phone music editing was born. The Ondo combines the touch screen ability with a back that lithely twists and turns to allow for fast and comprehensive editing of desired music on the phone.

This new concept according to Pilotfish is a bid to lessen the burden of mobile phone manipulation especially for those who find it hard to even understand the features and also make music enthusiasts happy. Of course we can not conclusively judge the efficiency of this designed concept but the need for a classy easy to use music editor has always been in the heart of mobile phone music lovers who want a calling phone with an Ipod like concept among its features.

[Press Release]
Pilotfish Launches Ondo Music Editing Phone Concept

Play it, mix it, rock out to it! Ondo enables a more flexible and physical experience in mobile phones

MUNICH, Germany – April 20, 2009 — Pilotfish, a progressive industrial design and product development studio based in Munich, Amsterdam and Taipei, today introduced Ondo, a dedicated music editing phone concept. The Ondo concept enables OEMs to visualize a new form of user interaction for mobile phones. User The target user for “Ondo” is the music enthusiast who seeks to interactively capture and edit sounds. Going beyond software-based solutions of other products, it is specifically designed to effectively collect pure sounds and is specially constructed to create a tactile sound editing experience.

Music Editing
Made from form-sensitive flexible materials, “Ondo” allows the user to modify recorded sounds by physically twisting and bending the device. Like a guitarist pulling on a whammy bar, users can feel and hear the musical effects as they create them.

Jamming
Another innovative feature of “Ondo” are the three removable display ”sticks”. In their normal state, the “sticks” act as a unified touch display for the mobile device. When removed, each can be separately clipped onto a musical instrument or person to capture live sound. Like a portable recording studio, “Ondo” makes mixing tracks easy, because each “stick” picks up isolated sounds from each individual instrument. The recordings can be immediately sent via MMS (Multimedia Messaging) around the globe allowing musicians at different geographical locations to jam together.

Mixing
In party mode, “Ondo” works as a digital mixer enabling the user to create seamless transitions between songs. This is made easy with interactive touch functions combined with integrated software support.

Market Opportunities
The advantage of such a device is that a range of services and accessories can accompany it in order to enhance the sound capturing and editing experience. From a business perspective, most of the players in the mobile world can benefit: for example, content creators – by providing sound libraries or musical games for download; operators – by facilitating increased user interaction; and device manufacturers – by producing accessories such as input devices, Bluetooth instruments, etc.