Designer : Evgeny Orkin

Designer : Johanna Schoemaker

Victor says about Mytho :

The MYtho, is a concept car designed to be simple, but at the same time sophisticated. With inspiration from vintage cars, like the woodies, i was able to find a sustainable design solution for the side panels, which are made of compressed wood also the whole body is made of aluminum, in order to be recyclable.

The “tech” factor is in it’s OLED displays, build-in solar cells, and HUD display’s for the driver.

The form of the car is very simple, like the hot rods from the 30’s. The open wheel design, the huge front grill, and the low profile of the car, are just some indicators of this.

Designer : Victor Uribe Chacon

The design comprises both economic and technical efficiency. The chassis is covered in an unpainted swappable plastic skin, which eliminates the painting stage. The placement of the rear wheels within the rear quarter panel offer improved aerodynamics. The rear and front façade of the car contains thin-film OLEDs under the colored polycarbonate surfaces, through which users can personalize parameters like day-running lights or graphically expressing themselves by adding custom decals. This feature will also eliminate the need of placing individual lights for turn indicators or brakes.

The dashboard has been kept minimal for individual movable components; rather it contains a huge touch screen where most of the interactions between the car and the rider will take place. While driving, users can keep their other works going on through the internet connectivity and share their driving experience through social networking websites.

Designer : Irwan Azhari

Designer : HJC Design

Designer : Louis Filosa

Ibex comprises high-end multimedia system including video, audio, wireless network connectivity and on-board memory storage, controlled through touch-screens located at the passenger console and swim deck. Moreover, the tower of this boat is equipped with rear facing cameras that will offer the rear-views to the driver for better driving. Within the front hatch, there is a color-matched and flush-mounted hard top that can be removed to reveal a luxurious foredeck bench. This boat features direct drive propulsion mechanism that eliminates the probability of injury or unexpected situations on an exposed prop while lessening the boat’s draft also.

Designer : Peter Carrasquillo

Text from designer :

Airliner

This long distance transport vehicle is actuated by superconductive magnets. Superconductors produce frictionless levitation avoiding any mechanic resistance. The vehicle hover above the street. The superconductor is cooled down by electric condensers so the particles of the material nearly stop moving. A rail embedded in the street creates a magnetic field which will be written in the superconductors, positioned at a set distance from the magnetic rail. No mechanic fixation between rail an vehicle will be required. The electromagnetic field generated by the rail also speed up the vehicle. The magnetic field is only generated under the moving vehicle and wont be of any danger for other moving vehicles crossing the rail.

The airliner consists of a drivers cab and several modules which float autonomously, so the shipping volume is expandable. If no cargo is carried the drivers cab ally with the closing module to reduce the volume. At a logistic centre close by a freeway and a city, the cargo gets unload, stored and upload to the cityloader.

Cityloader

This compact transport vehicle is designed for distances up to 400 km and the city traffic. It is powered by electric engines and wheel hubs which can be recharged via plug`n`ride concept at the logistic centre or city stations. A modifiable loading space allows a wide spectrum of use.

Designer : Tobias Förtsch

The water pressure and temperature control unit is fitted under the sink which is consists of two parts. One is the microprocessor that processes the incoming signals of the peripheral sensors and the microphone, in order to control the water pressure and temperature adjustment. Another component is the water pressure and temperature adjustment device. All the processes are carried out through electric network feed and the water is heated through the heating elements. Adjusting the water pressure is executed through opening and closing a valve and water heating requires a particular amount of time excluding the odd energy consumption and heat loss for a constant heating.

Having come to the sink, the user will pronounce the needed water temperature and when the hands are taken to the tap, the motion sensor sends the required signal to start water flow with the preset temperature. If the user wants to adjust the water pressure, approaching just a finger over different sensors will provide different water pressure. The overall procedure takes less than 2 seconds and settings are saved until next session begins.

The Water Symphony can work in both constant water supply and motion sensors modes and is a perfect solution for those who cares for health and hygiene, and keeps up with time.

Designer : Aleksander Mukomelov

Designer : Tryi Yeh