Explanation from Petr:
The exhibit is an active relaxation and rehabilitation bath with special features that permit the changeability of water volume (0-410 L) and provides a pleasant form of relaxation due to its continual and smooth changes to the ergonomical shape of the structure. The bottom contour of the bath adjusts in order to conform to the required position and height of the user. The various geometrical changes to the shape enables the bath to be “shortened” for example, creating a backing for the legs in order to maximize on comfort.

For the purpose of saving on water consumption, one can simply change the depth of the bath so it becomes shallow or select a shape that is most suitable for the user. The changes to the shape of the bath floor can be modified & readjusted anytime. Another wonderful trait of the bath is that it is equally convenient for bathing children, because one can adjust a safe depth of bath, reducing risk of drowning as well as being equipped with soft finish of the base. In addition to creating minimal dimensions, the bath itself can be used as a baby changing table. Getting in and out of the bath tub is simple and effortless. There’s no need to climb over edges of the bath. This way, it is beneficial for people with physical disability or those completely immobile.

Uniquely, in this bath we can experience an unmissable feeling of soft, rippling of the bath floor during bathing or when having a massage. This is a new form of relaxation which we can daringly refer to as “kinetic therapy”. The type of technology used forms system of 10 pneumatic pistons (compressed air powering pistons) and includes inclinable segments covered with soft upholstery. This lining creates a pleasant feeling without causing pressure on the body even in the case when the bath is low filled or during the filling or draining of the bath tub. The movable segments are covered by special, highly elastic, hygienic and strong foil (used in the concept of BMW Gina. The geometric shape of the head rest can be partially changed and is also made from movable structures, covered in flexible foil. The type of material`s used are synthetic rock (e.g. ceramics, plastic shroud), glass, elastic foil.

Other systems used are classic hydro/air massaging jets capable of being rotated and powered by electric motor. The connection to mains water supply, water outlet, air and hydro massage jet is through flexible hosing. The bottom of the tub is sealed and the whole base can be raised or lowered over a flat surface of the inner side-panels of the bath. That is how water tightness is ensured.

Everything is controlled electronically with a remote control. As a result, it is possible to select filling/draining of the bath, change water temperature, adjust hydro/air massage settings (duration, intensity, cycle program) and change the shape of the bath floor whit comfortably resting in the bath tub. This is done with the help of sensor button on the display of a remote control. The geometry of the bath can be altered simply by means of accessing touch display screen on the remote control. Naturally, the program remembers previous settings and if the conditions allow, the bath immediately fulfills the command of the user. Simultaneously however, whilst making the change, the height of the water surface, its volume and temperature as well as the total water consumption is electronically monitored.

The filling of the bath is possible through water inlets positioned right beneath the head rest, whilst draining is carried out through the segment located in the middle of the bath tub. If we were to come back to the principle of shaping the bath floor, an alternative method exists, which replaces pneumatic pistons and electrically tilted segments with air pouch system (ballonet). In addition, the foil covering the surface of various segments can also be replaced with a variety of other materials available on the market, that have similar properties.

Designer : Petr Kubik

Text from Adam :
There are over 400,000 reported drownings and 8 – 10 times as much near drowning experiences worldwide every year. In the UK there are 500 annual drownings. These figures have remained the same for nearly 20 years which tells us that any current equipment and practice is not having the required impact to reduce these numbers.

I have been a beach lifeguard for a number of years and further primary and secondary research has shown that there are a number of key problems that reduce the survival rate of beach users.
These problems are:

• Slow response time
• Surveillance
• Lifeguard safety
• Human limitation of lifeguards

From this research it was decided to look to the future to see what could potentially be new directions for beach safety equipment, this design is therefore based for the year 2020.

The design process was in close collaboration with the BSA (British Surfing Association) headquarters in Newquay (UK). Starting with brainstorming where no idea was a bad idea, followed by concept generation and a wide variety of modeling and system/ scenario testing, the design took innovation from nature, new and existing technologies and user testing.

Explanation of final design

The ‘Mantra’ lives on the sea bed during peak seasons just off the coast of beaches; it uses small hairs on its surface to collect and store energy from tides and waves (called ‘Super Cillia Skin’). It detects distress and drowning using electro sensors coupled with sonar which even today are highly sensitive, for example heartbeats and movements can easily be monitored. When a casualty is detected it swims up to 15mph using SMAs in the wings. The victim is carefully picked up onto an inbuilt stretcher where they are carried on top the water using hydrofoils and impellers. The ‘Mantra’ is always in constant communication with lifeguards and so is met at a specific beach location by lifeguards and ambulances where an EAP is in place and the stretcher is removed without disturbing the patient, who in the worst case scenario may have neck injuries.

Stretchers are replaced and the ‘Mantra’ can assume its position at sea once more. The whole process is estimated to take under 2 minutes.

The final design as can be seen from images, uses biomimicry from a manta ray for many reasons –

• Large flat surface area for all weather stability
• Excellent turning circle and manouverability
• Excellent strength to weight ratio
• Low energy travel
• Considered as a non aggressive creature/ form

Advantages of ‘Mantra’:

• Removal of contact with bodily fluid
• Safety of lifeguards
• Immediate response time
• Completely automated
• Better for spinal and other injuries
• Aesthetics
• Function
• Sustainable

Designer : Adam Scott

Populous says :
Incheon Metropolitan City is a world class city, and this will be an innovative design, benchmarked against world’s best practice.

The multipurpose stadium builds on the design developed by Populous for the main stadium for the 2012 Olympic Games in London and illustrates a new level of sustainable design in public infrastructure built for major events such as an Olympics or an Asian games.

The key to the stadium’s success will be reducing it down and linking it into the surrounding parklands, to make it an open accessible building, for its people. This way it can achieve a connection with the community that is vital to securing its long term sustainability and a true legacy for the people of Incheon.

Designer : Populous and Heerim Architects and Planners

Text from John :
Imagine sleeping while you drive. This notion may sound insane, but it is very possible with the Saucer. The world today is growing at a very fast pace and will continue to do so, meaning that people will not have enough time for anything and sadly that includes our precious sleep-time. Just to mention a few, perhaps you often have late nights from work and are too tired to drive or you need to get to an appointment, which is hundreds of miles away, early as possible the next morning or maybe you were invited to a party, but too drunk to drive back home. This is where the Saucer comes in…

Of course, the vehicle is not designed for an alcoholic individual or to cure insomnia, rather it is designed for those with very busy lives that leave them with little or limited sleep time.

The Saucer is a self-driven vehicle with a single size bed arrangement, where the driver is no longer the driver and instead take the time to sleep as he/she travel to his/her destination. This unique vehicle is especially targeted at night-shift individuals who are a long way from home. Simply put, if you’re feeling too tired to drive, don’t leave home without it.

The interior is soundproof and is equipped with a set of programming consoles that self-drive the vehicle. Even when awake, while traveling to your destination, there is enough room for you to lay back and relax, and keep yourself busy. Perhaps reading a magazine or newspaper, or simply turning-on some entertainment. A medium-size cargo compartment is also integrated at the rear end of the vehicle where you can store up some of your gear, such as a briefcase or a suitcase. – inspired by the Alien Flying Saucer.

Designer : John Bukasa

Designer : Tom Mudra and Hans-Tobias Schicktanz

For its occupants, the open bodywork of the car represents highly practical solution for urban mobility through a turning required circle of only three meters and a footprint hardly larger than that of a scooter. The wheel provides easy and agile handling that ensures rarely getting stuck in the traffic, while the low center of gravity of this four-wheeler provide excellent stability.

A completely unique feature of this car is its octagonal wheel fairings that entirely cover the tires. This innovative design creates a pleasing and harmonious feeling along with its pearl-white and blue hub caps, where no one can see the wheel rotating any longer. Instead, the movements of the hub caps are only being seen, giving a silent and graceful gliding appearance along the road.

The Twizy Z.E. concept car is powered by a 20hp (15kW) electric motor that can develop 70Nm of torque, combining comfort with reactive performance at any engine speeds. It can accelerate like a 125cc bike and pulls away quickly from standstill. The car features a 75kph of top speed which may not seem a big number, but since it is designed to be used in busy traffic, it still is a fast car while cutting the traffic easily.

Designer : Renault

Horizon ploughs straight through the crest instead riding over it which reduces vertical acceleration drastically. Only with the SkySail, Horizon can run at 24 knots max and coupled with the 2 5000hp engines, it will top out at 45 knots.

Designer : Barnaby Heseltine

Victor says about Mytho :

The MYtho, is a concept car designed to be simple, but at the same time sophisticated. With inspiration from vintage cars, like the woodies, i was able to find a sustainable design solution for the side panels, which are made of compressed wood also the whole body is made of aluminum, in order to be recyclable.

The “tech” factor is in it’s OLED displays, build-in solar cells, and HUD display’s for the driver.

The form of the car is very simple, like the hot rods from the 30’s. The open wheel design, the huge front grill, and the low profile of the car, are just some indicators of this.

Designer : Victor Uribe Chacon

The design comprises both economic and technical efficiency. The chassis is covered in an unpainted swappable plastic skin, which eliminates the painting stage. The placement of the rear wheels within the rear quarter panel offer improved aerodynamics. The rear and front façade of the car contains thin-film OLEDs under the colored polycarbonate surfaces, through which users can personalize parameters like day-running lights or graphically expressing themselves by adding custom decals. This feature will also eliminate the need of placing individual lights for turn indicators or brakes.

The dashboard has been kept minimal for individual movable components; rather it contains a huge touch screen where most of the interactions between the car and the rider will take place. While driving, users can keep their other works going on through the internet connectivity and share their driving experience through social networking websites.

Designer : Irwan Azhari

[Press Release]

Ancona, Italy. September 22, 2009. WHY, Wally Hermès Yachts, today unveils a revolutionary
approach to cruising in motor yachts with the presentation of a full size model of its first born, an
innovative 58 metre-long 38 metre-wide yacht, in Ancona’s shipyard.

Wally Hermès Yachts: a joint-venture.
WHY is the result of the joint-venture signed in June 2008 between Hermès and Wally, to develop a new type of motor yacht redefining the art of living on the sea. The iconic Parisian house and the iconic Monaco yacht brand formed an equal partnership whereby each company is fully involved in all aspects of the conception and design of each project. Pierre-Alexis Dumas, Artistic Director of Hermès says : “When we met, in autumn 2007, Luca Bassani Antivari, President of Wally had thought about asking Hermès to accessorise the interior of one of his boats. I was impressed by the daring of his projects. My instinct was to get on board with him and go and seek out new territories in yacht design, but I had no interest in speed.”

Luca Bassani Antivari explains: “What I’ve always liked about Hermès, aside from its intrinsic quality, is its audacity and radicalism; its desire to go beyond trends, to make no compromises and to maintain the authenticity of the house. Wally shares the same values, ‘Hermès-on-Land’, ‘Wally-on-Sea’: inevitably our paths had to cross.”

WHY 58×38
The common values of the two brands have led to a first yacht that offers an unparalleled living space at sea. WHY was developed to give life to this concept assembling a team of dedicated talents in design, engineering, and naval architecture.

Then the tried and tested Norwegian Ramform hull characterised by exceptional and unprecedented stability and volume and spotted by Luca Bassani Antivari, revealed itself as the ideal choice to be adapted to the WHY 58×38 project.

Following this unique adaptation, the decks and the interiors were developed in accordance with the fundamental credo of WHY, ‘form-equals-function’. Thus were born other innovations in the world of mega yachts: patios generously flooding the interior with natural light, photovoltaic panels on the glass hull sides, as well as on the roof opening, like Venetian blinds, a 25 metre-long forward end swimming pool, and a 36-metre aft deck beach.
WHY 58×38 offers comfort, privacy, stability, space, independence and sustainability.

Sustainability
“We are very interested in creating a yacht that will have a low environmental impact”, says Pierre-Alexis Dumas. “Its relationship with the sea must be respectful and easy. WHY intends to offer a new way of moving over water by creating an innovative way of managing and recycling its sources and uses of energy.”
“If you want to go totally ecological, it’s only sailing yacht. The reality is that today, 90 % of the market is powerboats, echoes Luca Bassani Antivari. Our aim is to reduce diesel consumption per year and per yacht: 20 to 30 % for propulsion and 40 to 50 % for generation.”

Thanks to its specific hull, WHY 58×38 requires less power at cruising speed than a boat of equal size. Its diesel-electric propulsion is the most efficient motorisation today, and the surface of the photovoltaic panels, almost 900 square metres, covers most of the boat’s auxiliary system needs.

WHY Research and Development plan to optimize this project’s energy consumption by improving the isolation of the yacht and the heat recovery of its engines, and is also investigating the latest wind energy production and wind propulsion system technologies.

In comparison to a yacht of the same size, WHY 58×38 has been conceived to reduce drastically its energy consumption, saving up to 200 tons of diesel per year.
The WHY R & D program includes tank testing for hull stability in the SSPA facilities in Sweden, and the construction of a full-scale mock-up in order to allow the design team to fine tune the living areas correctly in accordance with the hull’s unique shape.

“The WHY 58X38 yacht looks very unfamiliar but it remains on a human scale. Space is the greatest luxury on the sea, but I believe the new luxury will be the time to enjoy it”, concludes Pierre-Alexis Dumas.

Designer : Pierre-Alexis Dumas, Luca Bassani Antivari, Gabriele Pezzini, and MauroSculli