Vlad Icobet says :
“The Egg is an all in one cooking and food preparation unit that unfolds like a flower from a cylindrical starting position using advanced electro-active polimers. The wings form three separate units that provide a place to prepare food, a cooking surface, and a washing facility. The Egg also includes an interactive holographic projector that allows the user to find information online to create recipes or get cooking instructions. When not in use, the Egg can be easily stowed to save space. It can be customized in any color to fit any kitchen decor.”

Designer : Vlad Icobet

The riding position of this eco friendly vehicle can be adjusted as per the rider’s requirement and one fast movement can turn the vehicle into a trolley from a motorized trike that you can drag or store anywhere. The rear wheel houses an eco electric motor that charges the battery as the front wheel turns and harness energy that is lost in breaking to charge the battery. A luggage compartment is located in between the battery and the motor where you can store your necessary stuff. It comprises a strong, lightweight and eco friendly polycarbonate structure that can be recycled several timers over using low energy.

Designer : Nick Fisher

From Patrik:

The Reason Why
In Sweden, inviting friends over to one’s home for coffee is a very common social gathering. During my research, I found that people who have espresso machines don’t use them during these social coffee gatherings but serve conventional coffee instead because it’s more simple, more time efficient, allows easy refills, and it brews at a touch of a button which doesn’t take the host away from the party.

The making of an espresso beverage is a procedure that is traditionally taken with much pride and joy. Originating in Italy, espresso drinks have grown popularity all over the modern world. I wanted to create an espresso machine that will allow all participants to experience this procedure of creating their own espresso drink, rather than the host being in charge of everyone’s beverages and be left out of the conversations. And the procedure should be simple enough so that all people, regardless of knowledge of espresso making, can use and enjoy.

How It Works

Docking mode
The barista espresso machine consists of a docking station, brewing unit and five espresso cups. One of the main features with the Barista is that it allows multiple users to be in charge of their own espresso brewing, instead of just only one person in conventional espresso makers. To enhance the portability and make it easier to carry, the Barista works in two modes, carry mode (collapsed) and brewing mode (raised). The Barista is connected to the wall outlet when in docking mode, and functions as conventional espresso machine, where beans are grounded for each individual cup in the kitchen.

Portable mode
To make it portable some task are divided up to optimize the power consumption; the coffee beans gets pre-grounded in the kitchen and the water is pre-heated into a thermos at the same time to eliminate unnecessary energy consumption. Collapse the brew unit by pressing down the top part, to raise it, give the handle a push and the machine will raise by itself to brewing mode. The turning top allows the users to access the machine from all directions. Place cups on the tray and rotate the turning top part to move the nozzle over to the other cups.

Designer : Patrik Petersson

Text from the website:
Dr. Jim Levine of the Mayo clinic discovered that if people are active throughout the day by being reminded to move or stop being inactive they could keep their metabolism from shutting down and therefore be able to lose unwanted weight. Through his research he strove to better understand the benefits of non-exercise activity thermogenesis (NEAT) and came up with the concept for a wearable device.

He determined the key was a system that could calculate an individual’s metabolic pattern and measure calorie burn throughout a day’s activity and then relay targeted caloric intake to the user. He needed a device that not only monitored and measured an individual’s every movement in a 24-hour period but also prompt the individual to get up and initiate activity before their metabolism slows. The Pelegrin Partners licensed Dr. Levine’s technology and founded the company to take this important weight management opportunity into commercial practice.

Designer : Worrell

Zhang says:
MERM (Modular Electronic Retail Minivan) facilitates a mobile retail market that could bring retail services and vibrancy to city areas that have been drained of intensity due to singular functional uses or irregular visitor flows. With its various functional modules and transformable car body, MERM makes optimum use of the space it occupies. The electric engine does not produce any air pollution and the solar panel on the roof provides power for all facilities on board.

With the help of a central information system, a group of mobile MERMs could greatly increase the efficiency of the retail process, and reduce unnecessary municipal input. So that MERM can match various sales purposes in different environments, the central container has been designed with changeable modules. These accommodate “Magazines and Souvenirs”, “Hot Food” and “Frozen Food”. Users can purchase several types of modules and choose a two-module combination (one for each side of MERM) that best fits their current sales plan. Modules are easy to replace by simply sliding them out from the car body.

When MERM is in driving mode, all the inner space is fully used for storing goods. When it’s switched to retail booth mode, the shelf can be easily unfolded for display outside the car, making adequate space for the vendor to stand inside. This feature minimizes the size of the car and thus reduces its energy consumption. Also, the compact size enables the user to drive in narrow urban streets.

Designer : Zhang Zhongren

Text from the website:
Our original goal was to improve the CFL bulb, both in color and usability, but the technology to do so was not obvious. We began to explore colored filters and realized that any filter would reduce the lumen output. We then looked into adding LEDs to change the overall color output. This led us to the realization that florescent lights have huge environmental drawbacks. CFLs use ballast, which contains mercury, electronics and plastic housings. Most consumers just throw fluorescents out with the trash, even though they should be disposed of as toxic waste. CFLs are not dimmable and therefore use their maximum light output each time they’re turned on. In addition, the form and cold color of CFLs keep them from being widely accepted as a replacement to the incandescent bulb.

As our ideas began to focus on combining LEDs with a fluorescent, we sketched several forms that tried to create harmony between the two technologies. The idea of creating a separation between work and home life through the modulation of the color output drove some of our early forms. As soon as we chose to use only high-output LEDs, our forms changed significantly, rendering the old concepts no longer valid.

As designers are inclined to do, we started to create beautiful forms that revolved around the advantages of the new technology and the form factor it lent itself to. This may have been our biggest wrong turn. With LEDs, that form was flat and thin; but this would not solve the problem we had defined for ourselves. To create the biggest impact on society, this design had to keep the barriers to acceptance as low as practical—which in part meant no super-sexy, fluid designs that would only be found in high-end design stores. Any unnecessary styling would cause a rift in its mainstream acceptance.

We realized the easiest way to create acceptance was to deliver the technology in an already widely accepted form. The form of a standard light bulb was then the obvious choice. It would not ask consumers to change their form of power, their light socket or replace the lampshade attached to the bulb. And it underscored the notion that good design is about solving problems for the whole ecosystem of the product.
Designer : FrogDesign

Text from the designer :

Natura Levo is a small wind, vertical axis wind turbine. It is a 66″ tall turbine that contains two non-traditional blades that can catch wind from any direction. These blades are fastened within a unique steel component which also houses the tapered bearings allowing the blades to spin with little friction. The center axis is a beautifully formed stationary shape that mounts to existing architecture. The intended architecture can be anything ranging from a telephone pole, to an old chimney mount, to a flag pole in a residential back yard. Natura Levo is intended to harness energy from a renewable energy source while co-existing with its natural surroundings. Natura Levo should be so beautiful that it raises awareness of natural energy by admiration of its design.

Natura Levo is made primarily of Novomer plastic, with necessary steel bearings, adjustable cylinder mount, and small housings. The steel components are machined, and with the exception of the housings, these are standard forms. The remaining steel pieces would be machined in 3 separate entities and welded together. The axis is Novomer and injection blow molded; the blades are a bit more involved. They would be formed in 4 pieces and snapped together. The nature of the rotation would strengthen the fastened segments by using the natural force. These 4 pieces would be injection molded.

Designer : Laura Sink

Capca is space-saving car to serve as an alternative to public and private city transport. Capca vehicles are environment-friendly. Their parkings are innovative, compact and attractive. They can function as recharging stations, solar energy storage batteries and oxygen generators (optionally). Its design is inspired by nature: you can observe clear outlines of petals, shells, flowers, animals and insects as well as medieval knightly armor.

Technical Features :
The electro-engines are located in the back wheels. The car glasses are made of transparent solar batteries and in addition there is a transparent monitor built into the windscreen. The car is equipped with sensors and panoramic view cameras, with navigation and auto-parking systems. It’s important that wheel-engines are shifted together when parked, that will make the back of the car smaller. There are two accumulators in the car: the first is for a chassis and the second is for electronics.

The maximum speed of the vehicle is 90 km/h, fuel distance at one battery charge is approximately 180 km, full charge time from solar batteries is approximately 10 hours under average sun activity. Vehicle dimensions: length 2230 mm, width 1590 mm, height 1530 mm. Wheel base: 1540 mm longways, 1270 mm edgewise.

Target Group :
Large city residents, large companies, recreation centers, amusement parks, universities and public offices.

Designer : Anatoly Shikhov

High-pressure jets spray a mist of mild, ozonated water that sterilizes germs and bacteria, while providing a physical agitant to remove grime.After a 5 second wash cycle, the system begins blowing air from above, and sucking air in from below at a high speed, providing a fully cyclical airflow (shorter drying time). The air blows until the user removes hands from the field. Placing hands in Sync begins an automatic cleansing/drying cycle.

Designer : Insight Product Development

Public telephones and other public services (such as Automatic telling machines, Internet services, informational services) that are put in streets for more convince to customers consume electric energy. Not only for illumination but for different digital devices such as computers, LCDs, information panels, wireless devices… More and more of these services will be available on streets and more energy will be needed to support them. Solar public multipurpose booths provide, whatever the apparatus is inside, with necessary energy. Also every booth has lights that are powered by the same solar panels.

Bus stops with their large protective panels provide ideal space for application of solar cells. Generally, bus stops do not use much energy and in this way they can help other users from the SOLAR STREET FAMILY that use more electricity. Even more, the electricity collected by the Solar bus stops can be used by any other user as they are all connected to each other as well as to electric company. Lights of the bus stop itself are positioned in the base of solar panel and in the bus stop seating directed toward ground.

Solar park lamp uses the same MoSESS (Movement Sensors Energy Saving System) as Solar street lamp to reduce energy consumption. In the same way it recharges its batteries during the day and in the night uses it for illumination.

Solar street stand booths are popular way of shopping. They can sell and show different kinds of things ranging from food, clothes, souvenirs to information pamphlets and ads. These street stands consume electric energy for illumination, refrigerators, cooking…etc. Solar panel stores electric energy in batteries that are placed in the storage box. Solar street counters are independent from electric company network. They can be easily moved and placed into different locations by trucks (and small transportation wheels underneath the construction of the counter itself).

Designer : Nikola Knezevic