Future Technology » Search Results » motor cycle

Voltra Electric Motorcycle by Dan Anderson

TheFuture — Fri, 27 Nov 2009 08:42:00 +0000

Voltra electric motorcycle is the result of a broad research of the history of motorcycling, technology as well as culture and society, the manufacturing, as well as materials. Voltra’s main target goal will be to give an alternative tech which was appealed as necessary to the success, and greener fuel to its fashion conscious as well as conservative target market. This is electricity operated that conveys by a product semantic through visual sense on exhilaration and excitement not recently addressed to the market; however, it is very crucial on motorcycle appeals to the riders.

Designer : Dan Anderson

Green Speed Air Powered Motorcycle for Zero Pollution Effect

TheFuture — Wed, 18 Nov 2009 10:43:24 +0000

The Green Speed concept is an air-fueled concept bike that features a zero pollution effect on the environment through greenhouse gas emissions and especially being cheap and willingly available. The rotary air engine is lightweight, compact and powerful and is powered by compressed air from the two compressed air tanks. Because of its 3000 RPM of the engine, this bike can run only on one gear which is actually a sprocket bolted to the engine axis and chained with the rear wheel. The carbon fiber tanks of the bike stores the compressed air, when mass is produced, the solar panel generated energy will compress air and amass them in the tanks. The bike doesn’t contain any kind of lightening like headlight, indicator light or brake lights; instead, it contains three tiny cameras.

Text from the website:
The engine that used is a rotary air engine. It is the invention of the Melbourne engineer Angelo Di Pietro. The engine is compact, lightweight and powerful and runs on compressed air from two compressed air tanks on the bike. It revs up to 3,000 RPM, and because of this, the inventors didn’t need any gear box on the bike. There is only one gear, which is just a sprocket bolted directly to the axis of the engine and chained to the rear wheel.

Compressed air is stored in the bike’s on-board carbon fiber tanks. Once mass produced, the bike will have solar panels that will generate enough energy to compress air and store it in the bike’s tanks, which will increase its range indefinitely.

As the bike was designed as a speed record setter, there is no headlight, brake light or indicator lights on the bike. Instead, there were three little cameras fitted at the front and tail on the bike that are used to record the run. The body works were designed to be aerodynamic and lightweight, and it will be made of fiber glass or carbon fiber.

Designer : Edwin Conan

Relaxation Bath Provides A Form of Relaxation During Taking A Bath

TheFuture — Mon, 16 Nov 2009 08:35:09 +0000

Relaxation Bath is an active rehabilitation bath concept that features variable volume of water to provide an enjoyable form of relaxation during taking a bath. This concept has been designed to smoothly and continually change its shape accordingly to the user’s body shape and movements. In this bath the user can experience an exclusive feeling of bathing on a waving floor, while gets comfortable massage from the soft and gentle surface. The concept features a series of hydraulic posts that goes down when they gets pressure from a particular part of the user’s body and goes up when the pressure releases through his or her movements.

Explanation from Petr:
The exhibit is an active relaxation and rehabilitation bath with special features that permit the changeability of water volume (0-410 L) and provides a pleasant form of relaxation due to its continual and smooth changes to the ergonomical shape of the structure. The bottom contour of the bath adjusts in order to conform to the required position and height of the user. The various geometrical changes to the shape enables the bath to be “shortened” for example, creating a backing for the legs in order to maximize on comfort.

For the purpose of saving on water consumption, one can simply change the depth of the bath so it becomes shallow or select a shape that is most suitable for the user. The changes to the shape of the bath floor can be modified & readjusted anytime. Another wonderful trait of the bath is that it is equally convenient for bathing children, because one can adjust a safe depth of bath, reducing risk of drowning as well as being equipped with soft finish of the base. In addition to creating minimal dimensions, the bath itself can be used as a baby changing table. Getting in and out of the bath tub is simple and effortless. There’s no need to climb over edges of the bath. This way, it is beneficial for people with physical disability or those completely immobile.

Uniquely, in this bath we can experience an unmissable feeling of soft, rippling of the bath floor during bathing or when having a massage. This is a new form of relaxation which we can daringly refer to as “kinetic therapy”. The type of technology used forms system of 10 pneumatic pistons (compressed air powering pistons) and includes inclinable segments covered with soft upholstery. This lining creates a pleasant feeling without causing pressure on the body even in the case when the bath is low filled or during the filling or draining of the bath tub. The movable segments are covered by special, highly elastic, hygienic and strong foil (used in the concept of BMW Gina. The geometric shape of the head rest can be partially changed and is also made from movable structures, covered in flexible foil. The type of material`s used are synthetic rock (e.g. ceramics, plastic shroud), glass, elastic foil.

Other systems used are classic hydro/air massaging jets capable of being rotated and powered by electric motor. The connection to mains water supply, water outlet, air and hydro massage jet is through flexible hosing. The bottom of the tub is sealed and the whole base can be raised or lowered over a flat surface of the inner side-panels of the bath. That is how water tightness is ensured.

Everything is controlled electronically with a remote control. As a result, it is possible to select filling/draining of the bath, change water temperature, adjust hydro/air massage settings (duration, intensity, cycle program) and change the shape of the bath floor whit comfortably resting in the bath tub. This is done with the help of sensor button on the display of a remote control. The geometry of the bath can be altered simply by means of accessing touch display screen on the remote control. Naturally, the program remembers previous settings and if the conditions allow, the bath immediately fulfills the command of the user. Simultaneously however, whilst making the change, the height of the water surface, its volume and temperature as well as the total water consumption is electronically monitored.

The filling of the bath is possible through water inlets positioned right beneath the head rest, whilst draining is carried out through the segment located in the middle of the bath tub. If we were to come back to the principle of shaping the bath floor, an alternative method exists, which replaces pneumatic pistons and electrically tilted segments with air pouch system (ballonet). In addition, the foil covering the surface of various segments can also be replaced with a variety of other materials available on the market, that have similar properties.

Designer : Petr Kubik

Pholeum Transportation Unit with Efficient Next Generation Hydrogen Fuel Cell Technology

TheFuture — Thu, 01 Oct 2009 08:39:52 +0000

The idea of Pholeum transportation unit concept is based on the living cell tissue structure of a plant that can carry organic nutrients to any part of the plant where required. This vehicle has been designed as a personal mobility unit based on an ideal transportation means for mega-cities, which has made riding this eco-friendly car just equivalent to a bike down the street.

The minimalist interior features control steering pod, a mimicking game like control where brake and gas paddles embedded close to the steering wheel, offering next generation driving environment. The wheels are fully immersed with rubberized tire with independent spoke arrangement that allows the wheels to absorb the road bumps without having used the suspensions. Moreover, the out of the body wheel base has added few extra with the innovative look that the car already has with its clear body shell and green house like design.

The technology aspect of Pholeum includes a composition of memory plastic body work, allowing the material to be deformed back to its original shape under application of heat from scratches and dents. These plastic can be recycled further and remolded again into the same component if the damage is irreparable. The chassis is made of durable aluminum alloy, making the vehicle strong and lightweight. Comprehensive safety for the driver has been ensured with three external airbags, designed to deploy by sensing a fast automobile within a few meters of its radius through motion sensors. Each wheel contains quad electric motors empowered with efficient next generation hydrogen fuel cell technology.

Designer : Alexei Mikhailov

E-Board Tracker Bike : A Small, Funny, and Eco Friendly Motorbike

TheFuture — Wed, 30 Sep 2009 08:43:30 +0000

The Eboard Tracker concept doesn’t focus on just a transport vehicle, rather the designer has envisioned it as an eco-friendly, small and funny motorbike that can run at up to 30 mph and ensures better twisting around the corner of the street with its compact and light design. This bike contains hand throttle instead of traditional electric pedaling and features light, simple and optical flowing frame. A beam girder from section-I and hydro-formed tubes welded together in order to strengthen the steering head. The handlebar is shaped like an ace-bar which is fully adjustable and includes a cycle computer on top with speed, battery status and estimated remaining battery capacity readings.

This bike features a very close to “vintage racer” look with its regenerative breaking and a hub battery since they are similar to a set of drum brakes. The chain is swapped for a carbon shaft, bevel drive and nylon hypoid gears enclosed in right swing arm. Behind the pedal shafts, a small six speed cassette type remains hidden and comes operational if the battery becomes flat any time. Both pedals are lockable at 180 degrees and can be used as foot pegs

Designer : Jean François Vicente

Renault Picnic Zero-Emissions Concept Car Provides Room for Social Gathering

TheFuture — Mon, 07 Sep 2009 10:26:05 +0000

When people goes for a picnic, a car that can provide room for social gathering parked in an urban landscape is always desirable, which was the main inspiration of designing the Renault Picnic concept car. This car can become an urban furniture, where people can re-acquaint themselves with the surrounding natural environment with its various functionalities. It features LED-impregnated DOL that allows adjustable and customizable tinting patterns that will make the car’s surface a public art. The easy access sliding doors allow convenient entrance. You can attach a bicycle with the rear bumper and can arrange some extra sittings with tailgate rumble seats that slides-out from the front trunk. The Renault Picnic features low-cost and minimalist dashboard with i-pod compatibility which is ideal for new drivers. The modular seating arrangement of this car ensures equal comfort to be enjoyed for all passengers either inside, on atop the rear bumpers or on the front tailgate.

Gabriel says :
The Renault Picnic seeks to augment rather than detract from the health of it’s surrounding environment. It is a Zero-emissions vehicle that provides a social function to the parked car within in the urban landscape. When parked, the Picnic transforms into urban furniture, becoming a social space for people to re-acquaint themselves with the surrounding environment. LED-impregnated, glass-coated polycarbonate windows project customized images when the vehicle is parked, transforming the vehicle into a form of public art.

Further considering the environment, the exterior panels are composed of hemp-based composites, and the vehicle is powered by Lithium Ion batteries and two rear-mounted in-wheel hub motors.

In order to reduce cost, complexity and weight, the simple interior is constructed of modular components, with four identical, soy-foam seats and an i-pod doc replacing most of the functions, including sound system and GPS on the dashboard.

Designer : Gabriel Wartofsky

Triclo : Innovative Tricycle Concept for Urban Environment

TheFuture — Mon, 31 Aug 2009 07:54:32 +0000

The Triclo is an innovative tricycle concept, featuring the functionality of a paddling tricycle, while offering the outlook of a futuristic transportation means. This vehicle is designed to make room for one person only and comprises paddles with a convenient sitting arrangement. The Triclo has a steering wheel instead of conventional tricycle handles and an innovative and unique rear wheel setup. It features a shade over the driver that will let the driver protected from the sun and mild rain.

Randall words about Triclo:

Triclo is a conceptual design of what a tricycle can be in a urban environment. It uses an organic forms and contemporary trend. Balance in visual volume and mass. Using arrays and knots was the basis for the formal development and geometric design.

The concept was: low material vs. high volume

The design is targeted for a younger market but can be used by adults too. The idea was to create a tricycle with a diferent look to capture the attention of people and thus encourage exercise. At the same time the concept of design is important to not use much material in the product and reduce costs.

A tricycle is more than a bicycle but less than a motorbike, but this tricycle has almost a cab, this protects of the sun and rain to the user. Therefore, that is its advantage over a motorcycle that somehow is to approach a car. Maybe this way, providing superior comfort offered by a bicycle or even a conventional tricycle, is a way for people interested in using the product and increasing exercise in the population. The design is targeted for a younger market but can be used by adults too.

The materials were designed to be recycled once they finish their service life. There are variety of colors to suit all tastes.

Dimensions:
1800 x 1500 x 1100 mm.

Maximum capacity:
180 Kg.

Designer : Randall Marin

Unique and Funny Marionette Concept Clock from Mintpass

TheFuture — Thu, 20 Aug 2009 15:25:37 +0000

The Marionette Clock is a unique concept clock, where the entire wall acts as a clock and the hand is attached with strings that are clasped up to a conveyor on the top. The innovative design of this clock has made it like a puppet play, performed by the Mint boys, who are moving the clock’s hand by controlling the strings, while riding on a roller between their legs that are powered by electric motor.

Marionette boys control the vertical wires attached to the clock’s hand by winding and unwinding the crank. The vertical wiring is controlled by the stepper motor and the function of its module is to calculate the vertical wire’s length to a high level of accuracy. Display of time is done by calculating the vertical wire length and the unicycle’s position to their appropriate figure. The unicycle, on which the Marionette boys ride, is made of “Mycom”, which runs by the stepper motors and let the Marionette boys stay put. The Marionette boys are equipped with rechargeable and interchangeable battery, kept in a backpack on their backs for better balance and this unique design prevents the ride of the boys from falling off, even when they are positioned in an angle.

Marionette clock forms a kind of tiny circus show with two moving Marionette boys back and forth on a unicycle to show the time which certainly will create an artistic sensation.

Designer : Mintpass

Viu : 3 Wheel Electric Concept Car for 2 Persons

TheFuture — Wed, 12 Aug 2009 06:18:02 +0000

Viu is a futuristic concept car that has been designed with a living feel and has given the sensation about not only its aesthetic like a motorbike, but comprehensive safety of a 4 wheeled car. This lighter and smaller vehicle comprises more aerodynamics to make it more efficient and environmentally friendly with its 2 electric engines that never emit anything bad at all. The sporty and technologic outlook enables wheels, suspension or rear suspension to be seen in action from the driving position inside. Moreover, cameras with the floating rear view mirrors, air side intakes, aggressive LED front lights and carbon fiber elements have given the car an innovative and dynamic image.

The interior of VIU was designed aiming the needs of the future users by serving as a living means of transportation. The design of the dashboard stimulates the eye with two lateral LED lights that indicates an efficient driving meter and a tachometer. The 1+1 sitting arrangement of the car offers the exciting movement of a motorcycle together with the safety of a closed car. As the road turns, the car cabin inclinates with the turn and the back seat rotates following the turn to offer maximum driving excitement to the driver.

Up the drivers seat, there is a fan to blow on the drivers back and shoulders to motivate him and to provide an excitingly fresh environment during the hot season when moisture accumulate on the seat, another air fan is there to dissipate the moisture. The steering wheel is actually a drumming pad, which can jam in the speakers when the user drums on the wheel spontaneously. This extremely cost-effective vehicle will cost five cents only with Eneloop batteries for one month, eight hours a day use.

Designer : Quim Vila-Masana Mas

Shocker Chopper Bike from Team Tentakulus

TheFuture — Tue, 11 Aug 2009 05:08:19 +0000

Shocker Chopper is a motorcycle shaped bicycle that has been designed by the creative minds from Team Tentakulus which will give you a better impression like riding a bike without thinking of the expense on gas. The main difference of this straightforward bicycle from other conventional bicycles is the bulky, bike type tires. Riding the bicycle is a fun experience but the rider should be careful when driving since there was no indication about the brakes so far. This pure, plain and simple two wheeler vehicle doesn’t contain much ado and will surely be an eye catcher and appreciable by all range of people.

Designer : Team Tentakulus