[Press Release]

Higgins-Aubé Inc, a young Canadian company, is proud to show early images of its latest creation, the Energya, a three-wheeled vehicle. The Energya™ three-wheeled vehicle, also now know as a motomobile, is designed as a light, high performance vehicle. Similar to a sports car where the driver and the passenger are seated side-by-side, the Energya™ motomobile has a rear engine that drives the single wheel at the back. The vehicle feels, drives and behaves mostly like an open wheels racecar. The vehicle features a distinctive, cutting-edge aggressive design that reflects its level of performance.

Mechanically, the Energya™ motomobile will be powered by a motorcycle engine having a six-speed sequential manual transmission. It will feature an aluminum frame with inboard front suspension using superposed unequal A-arms. The dampers slightly protrude through the front cowling, both as a design statement and for cooling reasons. Particular attention has been given to reduce the weight of each component in order to produce a vehicle that conveys a dynamically thrilling experience. Particular attention has been given to reduce the mass of the non-suspended components and to centralizing most of the mass closer to the vehicle center of gravity for enhancing dynamic performances. The cockpit is typical of a racecar with only the essential instruments for the road. The seats are very supportive, in pure racecar fashion. Innovatively, half-doors are provided to ease access to the cockpit while providing side-impact protection. Convenience has not been neglected with a small storage space under the front cowling.

The advantage of having only three wheels is manifold. First and foremost, a three-wheeled vehicle is considered, in many jurisdictions as a motorcycle. Since the vehicle may do without many of the mandatory systems and components required on an automobile, the motomobile may consequently be made lighter, advantageously influencing its performances. As Higgins-Aubé shares the philosophy of late Colin Chapman, the founder of Lotus Cars™, reducing weight was indeed the cornerstone that led to the choice of this type of vehicle. Furthermore, a three-wheel vehicle having two wheels at the front, contrarily to having a single wheel at the front, is dynamically stable.

Performance targets are set high: achieve 0-100km/h within 4 seconds and lateral acceleration in excess of 1 G. Expect an engine in the neighborhood of 200 hp and an approximate vehicle weight of 350kg. The Energya™ motomobile is aimed at providing exotic car performance at down-to-earth prices.

Styling and design were conducted per state of the art R&D process. “We aimed at solving the main problems related to this compact architecture in sync with engineering. For example, ingress-egress ease and side impact protection were made possible by the use of a half door which also improves general styling by connecting the lower front cowling to the rear fairing with a continuous dynamic line” says Aubé.

Given appropriate financial backing, production units of the Energya™ motomobile could hit the market within 18 months.

As a future step, it is envisioned that the Energya™ motomobile will be offered as an electric vehicle. This will turn the electric-car stereotype on its head, as the same performance objectives will be maintained.

Designer : Higgins-Aubé Inc

Text from the designer :
MoVille consists of a single passenger capsule over an electric drive train. Three magnetic ball wheels are rotated without frictionless through electromagnets. Passenger capsule is shaped in an aerodynamic teardrop shape for maximum efficiency. It also tilts up and down for saving space in urban streets and become more aerodynamic on highways.

MoVille’s compact size takes up less space in dense urban cities. Because it has a sliding window door, it is easy to get in and out of in tight spaces. The passenger capsule tilts vertically to save space on the road and pivots for getting in and out.

MoVille features wireless road networking that allows for it to communicate with other cars and the road network. It is aware of where it is on the road and where other cars are. This allows for reduced traffic jams since cars can accelerate/decelerate synchronously. It also reduces the possibility of accidents.

MoVille’s small size and omni-directional wheels means it is easy to park. Equipped with proximity sensors, cameras, and GPS, MoVille can drive and park automatically.

MoVille features an organic led display on the façade that allows passengers to communicate and personalize their own cars. Because MoVille doesn’t need any headlamps, the OLED “eyes” are used for displaying vehicle status (running/charging/turn signal/etc).

MoVille has an artificial intelligence which allows it to act more like a robot than a car. MoVille recognizes its owner and opens its doors when you approach it. MoVille can drive itself allowing the passenger to save time.

Although MoVille can drive itself, it can be manually controlled with your digital devices like cellphones and portable game consoles. MoVille communicates with these devices which allow the car to be driven wirelessly. The dashboard can be retracted on demand.

MoVille has an electric drive train that uses electromagnets to rotate the ball wheels. Because there is no mechanical transmission and internal combustion engine, it is more efficient, and more reliable. MoVille’s compact body is built out of unpainted biodegradable plastic.

MoVille’s unique form factor allows it to integrate a second sliding door with integrated photovoltaic solar cells which can recharge the car’s batteries.

Designer : Woo-Ram Lee

Press Release :Honda’s Unique and Futuristic DN-01 On Sale From 1 August

Honda’s unique DN-01 motorcycle goes on sale on Friday 1 August from Honda Motorcycle dealers across the UK .

Available in two sleek colours of graphite black and pearl amethyst purple and priced at £9200*, the DN-01 – dream concept turned production reality motorcycle – with fully automatic transmission, is a truly unique machine in the world of motorcycling and defies being categorised.

Honda’s team of engineers set out to create an entirely new category of motorcycle and sought to combine elements of swift superbike performance, relaxed custom cruiser riding comfort, operating ease of a big scooter, attention grabbing and futuristic styling with unparalleled technological advancements.

It’s not a sportsbike, a cruiser, a scooter, a naked bike, adventure bike or a sports-tourer: it’s a new-breed of machine which couples performance, poise, comfort and practicality, all wrapped up in futuristic and radical styling whilst boasting some of the latest Honda technology.

The DN-01 introduces to motorcycling the most advanced fully automatic transmission ever developed for any two-wheeled vehicle – with HFT ‘human-friendly transmission’. Power comes from the proven and punchy Transalp 680cc V-twin, feeding through the HFT system, which offers auto, sports-auto or thumb-operated six-speed manual transmission modes, all providing smooth drive to the rear tyre without the lag of some traditional automatic transmission systems.The low-slung chassis keeps the rider in total comfort and control, while Honda’s superb Combined ABS Braking System keeps braking distances to a minimum in all conditions as well as enhancing safety. And to minimise environmental impact, the oxygen-sensing catalyser system manages the air/fuel mixture to reduce emissions to well below EURO-3 regulations.

Like most of Honda’s larger displacement motorcycles, the new DN-01 also comes fully equipped with the highly capable Honda Ignition Security System (HISS) to protect against ride-away theft.

Whilst the DN-01 looks stunning as standard, it can be further enhanced with a range of Honda Genuine Accessories designed specifically for this model, to include: a custom styled backrest for extra pillion comfort, heated grips with adjustable temperature, Honda Motorcycle Navigation Kit, speakers for a rider’s MP3 player, Bluetooth connection for a mobile phone, a motion and vibration sensitive anti-theft AVERTO alarm system, sturdy U-lock and a rugged, full bike cover.

This new breed of machine made its debut in the UK at the International Scooter and Motorcycle Show at Birmingham ’s NEC in December last year, before its world media launch at Lake Como in April. Having inspired a ‘wow’ factor for many, coupled with limited availability in the UK this year, orders have already been received for the DN-01 as many motorcyclists have stared in awe at the machine’s futuristic looks and the user-friendly nature of the new HFT system.

Honda Motorcycle dealers across the country will be unveiling the DN-01 on Friday 1 August so to see this unique machine in the flesh, or to book at test ride, contact your local dealer.Honda Motorcycle dealers can be located by calling Honda on 0845 200 8000, or by using the ‘Dealer Search’ facility within the Motorcycles area of www.honda.co.uk, where you can also find all the latest news and information about the full Honda motorcycle range, offers, genuine parts, accessories and forthcoming events.

Designer : Jamie Martin

The Dodge Tomahawk can reach 60 miles an hour in about 2.5 seconds, and has a theoretical top speed of nearly 400 mph. Each pair of wheels is separated by a few inches and each wheel has an independent suspension. Bernhard said four wheels were necessary to handle the power from the engine.

Engine
1. 500 bhp (372 kW) @ 5600 rpm ( 60.4 bhp/liter); 525 lb.-ft. (712 Nm) @ 4200 rpm
2. 10-cylinder 90-degree V-type, liquid-cooled, 505 cubic inches (8277 cc)
3. 356-T6 aluminum alloy block with cast-iron liners, aluminum alloy cylinder heads
4. Bore x Stroke: 4.03 inches x 3.96 inches (102.4 x 100.6)
5. Two pushrod-actuated overhead valves per cylinder with roller-type hydraulic lifters
6. Sequential, multi-port electronic fuel injection with individual runners
7. Compression Ratio: 9.6:1
8. Max Engine Speed: 6000 rpm
9. Fuel Requirement: Unleaded premium, 93 octane (R+M/2)
10. Oil System: Dry Sump; takes 8 quarts Mobil1 10W30 Synthetic
11. Cooling System: Twin aluminum radiators mounted atop engine intake manifolds, force-fed from front-mounted, belt-driven turbine fan.
12. Takes 11 quarts of antifreeze.
13. Exhaust System: Equal-length tubular stainless steel headers with dual collectors and central rear outlets.

Suspension
Front:
Outboard, single-sided parallel upper and lower control arms made from polished billet aluminum. Mounted via ball join t to aluminum steering uprights and hubs. Five degrees caster. Single, fully adjustable centrally located coil-over damper (2.25-inch coil with adjustable spring perch); pullrod and rocker-actuated mono linkage. Center-lock racing-style hubs.

Rear:
Hand-fabricated box-section steel inboard swing arms, incorporating “hydral-link” lockable recirculating hydraulic circuit parking stand. Single fully adjustable centrally located Koni coil-over damper (2.25-inch coil with adjustable spring perch); pushrod and rocker-actuated mono linkage. Center-lock racing-style hubs

Performance
0-60 mph: 2.5 seconds (est.)
(Some estimate 1.9)
Top Speed: 300+ mph (est.)

Dimensions
Length: 102 inches
Width: 27.7 inches
Height: 36.9 inches
Wheelbase: 76 inches
Seat Height: 29 inches
Weight: 1,500 lbs.
Track, Front: 8.75 in
Track, Rear: 10 in
Weight Dist: 49F/51R
Ground Clearance: 3 in
Fuel: 3.25 gallons

Transmission
Manual, foot-shifted two-speed
Aluminum-cased two-speed, sequential racing-style with dog ring, straight-cut gears
Gear Ratios: 1st 18:38; 2nd 23:25
Clutch: Double-disc, dry-plate with organic friction materials, hand lever actuated with assist
Final drive: Dual 110-link motorcycle-style chains
Front Sprockets: 14 teeth
Rear Sprockets: 35 teeth
Longitudinal, centrally mounted engine, rear-wheel drive layout; monocoque construction, engine is central, stressed member. Body of billet aluminum.

Price
$555,000