Some explanation from Edwin :
The exterior desing of the car is inspired by the form of fabric blown in the wind. The form also carries traces of the historical Auto Union Type C Streamline race.

There are no conventional doors on the car, but instead, inspired by the jet fighters, there are three glass canopies. The main canopy opens forward together with the steering wheel and the dashboard; the two passengers’ canopies open backwards; and a side panel on the bodywork opens downwards to act as a step, making the event of getting in and out of the cockpit very special and easy.

The interior is simply one continuous sheet, starting from the dashboard, then being folded and bended to create floor carpet and seat.

The interior of the car is as simple and futuristic as the exterior. Single sheet transparent LCD dashboard displays all the essential data such as speed and mileage. The screen in the center of the steering wheel displays digital map. The information can also be projected on the canopy by a head up display. The
whole driving experience would be like flying a fighter jet. There is a small but handy luggage space behind the driver seat for handbags and suitcases. It is also an arm rest for the passengers.

Four wheels are housed inside the car’s four “legs”. Each wheel contains an Audi In-wheel Electric Drive Unit, making the car an evolution in Audi’s trademark “Quattro” all time four-wheel-drive system. The long range Supercharge-ion battery which powers the in-wheel motors are separated into two packs located in front of as well as behind the cockpit, creating a perfect 50:50 weight distribution of the car for excellent handling.

Specifications:
Length: 4480 mm
Width: 1900 mm
Height: 1060 mm
Wheel base; 3048 mm
Weight: 800 kg
En Engine: 4 Audi In-wheel Electric Drive Units
Power: 544 hp (4 X 100 kW)
Torque: 4500 Nm (3319.03 lb-ft)
0-100km: 2.9 s
Top Speed: 360 km/h

Designer : Edwin Conan

The concept’s touch-screen user-friendly interface and industrial design features the lower energy consuming Inter CPU and the ability of remote management, coupled with the upgradeability and adaptability of the hardware design, representing operational savings and reduction in total cost of ownership. With this modular architecture, retailers will be able to configure the features and the styling of the system and can reach the customers through more touch points. Also, the design will provide the opportunity to boost revenue through intelligent cross-selling tools, digital signage and targeted ads.

With this concept, customers will get personalized and heightened shopping experiences according to their needs, whether they want to check product recommendations and reviews, store information or sales, all they can have through this high-tech, self sufficient and intelligent system. Thus, customers will get an efficient, informative and streamlined real life shopping experience while remaining in touch of the convenience of online shopping.

Designer : FrogDesign

Designer : Sean Bovee

Teakwondo Park would be a great place for visitors to discover the artistry of Teakwondo, Korea. This place will offer various embodiment training sessions such as Body ‘One’ to prepare body, Mind ‘One’ to inspire the mind and Spirit ‘One’ for complete the spirit. The main goals that this design has emphasized most is to develop a world cultural heritage spot and create a place that promotes the research, education and practice of groundwork for visitors all over the world. Moreover, this concept would be a center to promote Teakwondo and Korean art and culture through an international network. This mega-construction will also provide the opportunity to promote sustainable and socio-cultural synergy between the local markets.

Designer : Samoo Architects via Bustler

Designer : Rinspeed

Text from the website:
Our original goal was to improve the CFL bulb, both in color and usability, but the technology to do so was not obvious. We began to explore colored filters and realized that any filter would reduce the lumen output. We then looked into adding LEDs to change the overall color output. This led us to the realization that florescent lights have huge environmental drawbacks. CFLs use ballast, which contains mercury, electronics and plastic housings. Most consumers just throw fluorescents out with the trash, even though they should be disposed of as toxic waste. CFLs are not dimmable and therefore use their maximum light output each time they’re turned on. In addition, the form and cold color of CFLs keep them from being widely accepted as a replacement to the incandescent bulb.

As our ideas began to focus on combining LEDs with a fluorescent, we sketched several forms that tried to create harmony between the two technologies. The idea of creating a separation between work and home life through the modulation of the color output drove some of our early forms. As soon as we chose to use only high-output LEDs, our forms changed significantly, rendering the old concepts no longer valid.

As designers are inclined to do, we started to create beautiful forms that revolved around the advantages of the new technology and the form factor it lent itself to. This may have been our biggest wrong turn. With LEDs, that form was flat and thin; but this would not solve the problem we had defined for ourselves. To create the biggest impact on society, this design had to keep the barriers to acceptance as low as practical—which in part meant no super-sexy, fluid designs that would only be found in high-end design stores. Any unnecessary styling would cause a rift in its mainstream acceptance.

We realized the easiest way to create acceptance was to deliver the technology in an already widely accepted form. The form of a standard light bulb was then the obvious choice. It would not ask consumers to change their form of power, their light socket or replace the lampshade attached to the bulb. And it underscored the notion that good design is about solving problems for the whole ecosystem of the product.
Designer : FrogDesign

Text from designer :
This product is designed to assist people with disabilities to independently ride a bicycle. Disabilities such as Cerebral Palsy, Intellectual Disabilities and Acquired Brain Injuries can affect basic motor functions such as balance and strength, hindering their ability to operate a bicycle as an individual. This bike supports the rider’s disability by helping them balance the bike, be effortless to operate and also looking and functioning like a main stream bicycle. This helps the rider gain the independence and confidence to ride a bicycle without assistance.

Although this bike has been designed specifically for people with disabilities, there is no reason why this product cannot be used or adapted for other demographics.

This bicycle was created to support the physical limitations of a person with a disability. As a result, this gives the rider the confidence to independently ride a bicycle. This helps increase the riders self esteem and encourages them to become more active in society.

Designer : Gavin Smith