Each port, mast and starboard is running parallel, rather shadowing one another, which enhances the sail efficiency by covering maximum area. When the yacht is not with the sail, the booms remain joined with the aft and allow the sail to furl automatically in the line of the straight mast. Ankida can run under one sail too, therefore, the option of additional sails offer flexibility of pleasant cruising.

Designer : Lila-Lou

Text from designer :

Airliner

This long distance transport vehicle is actuated by superconductive magnets. Superconductors produce frictionless levitation avoiding any mechanic resistance. The vehicle hover above the street. The superconductor is cooled down by electric condensers so the particles of the material nearly stop moving. A rail embedded in the street creates a magnetic field which will be written in the superconductors, positioned at a set distance from the magnetic rail. No mechanic fixation between rail an vehicle will be required. The electromagnetic field generated by the rail also speed up the vehicle. The magnetic field is only generated under the moving vehicle and wont be of any danger for other moving vehicles crossing the rail.

The airliner consists of a drivers cab and several modules which float autonomously, so the shipping volume is expandable. If no cargo is carried the drivers cab ally with the closing module to reduce the volume. At a logistic centre close by a freeway and a city, the cargo gets unload, stored and upload to the cityloader.

Cityloader

This compact transport vehicle is designed for distances up to 400 km and the city traffic. It is powered by electric engines and wheel hubs which can be recharged via plug`n`ride concept at the logistic centre or city stations. A modifiable loading space allows a wide spectrum of use.

Designer : Tobias Förtsch

This concept device can be held in ways that is comfortable by the user and enables the utilization of the index finger and thumb. Most amazingly, this device can produce electrical energy by any kind of movement, even slight vibration persuades electricity, which is used to charge this device. More energetic interactions, such as, swinging the device repetitively between and around the index finger and thumb, gives a greater charge. The user can learn, develop and combine varieties of techniques for not only powering the device, but also increase the hand dexterity and coordination.

The track control section includes an electromagnetic inducer that generates an electric charge for the device from any kind of vibration or motion. The volume control segment includes all the major electronic modules of the device, including phono input, headphone output, memory storage unit and logic board. The volume control contains basic controls only and no screen, allows less energy requirement. The soft exterior casing of both main parts and beads provide easy grip and tactility, and is consists of thermoplastic polyurethane, which is an energy efficient material to manufacture and consequently, can be effectively recycled. The inner casing is made of stainless steel and provides protection to the electrical equipments and offers a tactile weight to the device. Aside from giving the device a unique form, the cable connects the two sections and transfer energy to all other components from the power supply.

Revealing the cable detach screws can be done by pulling out the soft outer casing. Unscrewing these will separate the entire device into different components that will let the user customize, repair and replace the components. Adjusting volume and track selection can be controlled by turning the end beads within the consequent end sections. The power and play or pause is controlled by clicking the beads into the sections.

Designer : Thomas Mascall

Designer : Orange

Designer : Harsha Vardhan via [EcoFriend]

Designer : Apostol Tnokovski

[Press Release]
Thousand Oaks, California, April 7, 2009 – World-recognized strategy, innovation, and design consultancy RKS is proud to announce the introduction of the Neuma Hybrid Tattoo Machine, as RKS helps Neuma revolutionize the tattoo industry and usher in a new age of artistry, comfort, and safety. The superior technology of Neuma tattoo machines benefits tattoo collectors and artists alike – with the lighter-weight, fully-autoclavable tattoo machine delivering a less painful tattoo experience and drastically reduced healing times.

Dissatisfied with traditional coil machines, award-winning tattoo artist and inventor Carson Hill set out to create a completely new kind of tattoo technology – the first air-powered tattoo machine. Carved out of solid aluminum years before the MacBook made it cool, the original pneumatic tattoo machine, known as the Neuma2, was light-weight and fully-autoclavable.

The latest evolution of the Neuma, the Neuma Hybrid, is the result of Hill’s desire to constantly push for improvements. Hill listened carefully to suggestions from artists and engaged RKS to re-engineer and re-design the Neuma2. The result is the Neuma Hybrid. At only 3.7 ounces in its pneumatic configuration, the Hybrid still weights less than half as much as traditional coil machines. Packed inside this small but powerful package is an improved pneumatic design for greater efficiency and less air consumption, a larger impeller for more torque, a cushioned armature for compliance, a variable stroke-length, an improved collet, and optimized cycle timing for less drag on the skin when lining.

The “hybrid” part comes in when Neuma tattoo artists want to take the show on the road. Year-round and world-wide, tattoo artists travel to expos to create their art right before their fans’ eyes. With the baggage restrictions now in force by airlines, it’s becoming more of a challenge to travel with an air compressor. The Neuma and RKS teams brainstormed an ideal solution… a motorized module that magnetically-couples with the Neuma to transform it into an electric-powered tattoo machine. This means that Neuma artists can have the Neuma performance they love in an electric configuration that still weighs a full third less than traditional coil machines. And, most importantly, the pneumatic machine is still fully-autoclavable.

Whether you’re an artist, a long-time collector, or someone who’s been tempted but afraid to get a tattoo, the Neuma Hybrid represents a breakthrough in delivering a safer, less-painful, tattoo experience. And as for Carson Hill, perhaps Rosenau said it best, “He’s developed something that’s changing the way tattoos are done and the look of tattoos. He has his own little place in tattoo history.” Hearing that makes Hill squirm a little.

Designer : RKS Design for Neuma

Patrick’s own words :

Due to the growing number of private hand research facilities, the erratic spread of innovation in nanotechnologic increases, before ethic guidelines can be set up by governments. I use a critical and critical picture to point out a topic-related vision of our world in 40 years. The study’s fundamentals in technology and science are based on literature and ongoing science forecasts by well known scientists, to not drift off into science fiction but to create a reliable vision.

Because one can still argue about assets and drawbacks, this topics needs to be displayed as transparent as possible, in order to encourage designers to look into the subject and deal with it in a responsible way.

The nDoo’s powerful (autonomous) capacity to act represents not only the subject of nanotechnology, but also every new and extreme kind of innovation. The contrast within this concept is the nDoo’s medical ability to heal. On the basis of this gap, the concept aims to show the explosiveness and ethical-moral arguments of the subject.

The nDoo is a medical, autonomous communication device which serves as an interface between humans and nanobots in their bloodstream, constantly monitoring all body functions and keeping up a steady exchange with an up to date database of all diseases and therapies. The nDoo forwards commands to the nanobots or writes his own code. Humans can access information about their state of health and the nanobots’ activities via a three-dimensional hologram. The visualization happens in nDoo’s floating position. While in passive mode, the nDoo can be carried like a hand-held computer.

Nanobots act as a self-organized swarm, swimming through the body’s bloodstream – powered by a nano-engine – able to localize, reprogram, destroy or mark cells, viruses etc. The nDoo serves as an extension to the immune system, detecting possible viruses at an early stage and preventing diseases. Even the emotional situation and human senses can be analyzed and influenced autonomously. Humans are accompanied by nDoos from the cradle to the grave. Energy is transfered by an electromagnetic field.

Designer : Patrick Decker

FWD vehicle can also be used in rental system, once rented by means of a monthly payment, the bicycle/tricycle (fwds) can be obtained in any of several stations spread out through the city. Returning the vehicle to the station after each use is not required, but eliminates the need to either store or carry the bi/tricycle all the way across town (in a car, or bus) when you need to cover a greater distance. With fwd, you can take a bus to go to school, rent a fwd there to move across town, and return it before taking the bus back home. fwd is specifically targeted to college students, to which its existence is most beneficial, but can be rented by anyone.

Finally, in the ‘cruiser’ mode, the back wheels converge to the ground, effectively changing fwd into a highly mobile bicycle, suited for places where there isn’t a rail and for more adventurous uses.

Designer : Eric Pautz, Carolina Defferrari, Leo Joas and Patrícia Campiol

Kenneth says :
Shake is a mp3 player that can be charged by shaking when the HOLD function is on. With HOLD off, the user shakes the player for PLAY/PAUSE. The action of shaking the player to play or charge it is similar to shaking a pocket watch to wind it. The similar semantics provide an interesting yet familiar experience of giving life to an electronic device.The form of Shake was developed based on the language of a pocket watch, not only through the operation of shaking but also visually. Using the form from an established typology, Shake provides a comforting familiarity in a sea of electronics with foreign shapes and forms.

The use of kinetic energy to charge the battery not only solves an environmental issue, but also a more personal one. In situations like a long commute home, the user can enjoy personal audio without worrying about the battery dying out.

An electromagnetic coil is connected to the battery, converting kinetic energy into electrical energy that charges the battery. The player connects to the computer via a USB cable through the headphone jack, facilitating the transfer of songs as well as the conventional method of charging.

Shake would utilize kinetic energy generation technology developed by start up company M2E Power. M2E’s micro-generator technology delivers 300% to 700% more power than existing kinetic energy solutions (according to the company’s website), harvesting sufficient energy from normal daily and mechanical motion to power a wide range of mobile electronic devices.

This technology allows Shake to charge even in the user’s pocket while he/her is walking around.

Designer : Kenneth Tay