Designer : Nissan

The Faucet comprises five arms with different functionality such as three of them are supplying water, liquid soap and toothpaste, and the last two acts as driers. The Rocstar top is made of transparent plastic with lighting underneath which acts as control sensors and allow users activating a particular arm by simply touching it. After being activated that arm will give a magnificent led light and smoothly turns to the user. Other activities such as changing the water temperature, screen savers and profile colors, driers, etc. can be done with the center top touch screen of the Rocstar.

The basin has been designed to protect the users from viruses and other diseases that the users might infected with usual basins. Moreover, the color of the basin can be changed with the led effects and can be programmed to change the color every time someone enters into the bathroom. More surprisingly, the color of the spot where the water drops on the basin can be changed as well. There are exterior buttons on the stainless steel area on the basin that can control the covering and sterilization procedure and selecting profiles.

The mirror includes a digital camera which can be controlled from the rocstar through wireless system to know different previous conditions of your skin color, pimples, medicines, etc. The mirror will capture your photo every time you go to the bathroom which can be reviewed later for comparison. Hany Mansour, the designer, welcomes youto give any critics and suggestions. You can contact Hany here: COMISSARDAYS@YAHOO.COM

Designer : Hany Mansour, you

Victor says about Mytho :

The MYtho, is a concept car designed to be simple, but at the same time sophisticated. With inspiration from vintage cars, like the woodies, i was able to find a sustainable design solution for the side panels, which are made of compressed wood also the whole body is made of aluminum, in order to be recyclable.

The “tech” factor is in it’s OLED displays, build-in solar cells, and HUD display’s for the driver.

The form of the car is very simple, like the hot rods from the 30’s. The open wheel design, the huge front grill, and the low profile of the car, are just some indicators of this.

Designer : Victor Uribe Chacon

Text from Fabiano :
There are over 25 million legally registered vehicles on the UK’s roads today. Car manufacturers supply the basic tools that are required to perform the task of changing a wheel with every new car; these tools should be sufficient to complete the task successfully but is this really the case? Research suggests that people are reluctant to perform this task themselves.
Flat Tyres were the AA’s 3rd highest reason for call-out in 2005, beaten only by flat or faulty batteries and Lost keys.

Several user centered analyses were performed with volunteers who matched our key user profiles most closely. Existing products available for purchase were used. Many problems were highlighted in particular:
•  Safety, low posture is often required, particularly in removing wheel studs and jacking the car. If the flat is on the drivers sided, the task must be performed in the road as traffic passes. This posture hides the user from passing traffic and also makes it hard for the user to see the traffic approaching. This problem is increased at night.
•  Visibility of tools is poor at night. Existing tools tend to be black or grey in colour.
•  Clear instructions required, particularly for those who have never performed the task before. They serve to increase the users confidence in completing the task successfully and safely.
•  Psychological issues were also a key factor, many users remarked that they fear of failure would likely prevent them even attempting the task.

In every case we found that it was not possible to complete the task using the tools provided by the car manufacturer, a telescopic wrench was needed to increase the torque applied to the wheel studs.

The design concept behind the product changes the paradigm of how the most problematic task of changing a flat tyre is performed. The product minimizes the steps of changing a flat tyre by undoing the 4 studs of a wheel instead of undoing individually, using the motion force of the car.

• Utilizes the weight and motion of the car to release the 4studs, reducing required effort
• Does not rely on physical strength of user
• Improves road safety in reducing time spent in path of traffic

CONCLUSION

The final developed product is an innovative solution to the problems witnessed when changing a wheel. By loosening all four studs simultaneously, using the forces generated by the turning of the car wheel, the task becomes less demanding for the user while also reducing the time taken.

Designer : Fabiano Pottes

More information about crescendo from Jessica:
This is a flashlight designed for those in public service. (police / emt’s) I spent a great deal of time researching the environment which this would be used along with the individuals it is designed for.

The flared head elegantly opens the lens for an elliptical beam of light. This profile is easily removed and placed into the holster without being snagged or stuck on the form. The elliptical pattern of the light matches human peripheral vision. By utilizing this shape, the user can be more aware of their surroundings with a smaller light. It takes full advantage of the natural night vision of the user and enhances it.

The flashlight has 2 power switches. One on the tailcap- and a 3-way on the barrel. The 3-way switch is used to select the light mode- Green, Red and super bright white. The green light is very useful in chaotic / emergency situations such as a car accident. The green light prevents night blindness while still permitting the user to identify colors which can be extremely important ( blood vs oil). The red light is less visible to others and used for a low profile stealth situation. The red light- and elliptical beam simply enhances the users natural night vision to give them more feedback on their surroundings and more control. The super bright white light is for common use of the flashlight- as well as situation control by creating night blindness for a person that may be a threat.

The 3-way power switch allows for immediate selection of the color mode without cycling. The switch on the tailcap controls the white light as a constant-on (press to click) or a ‘blink’ on for quick flashes controlled by the user.

The rubber grips are very important. They 1 keep the users hand off the metal which could be cold especially in the winter. The grip has a cut-away shape filled with thin strips. This shape makes less cumbersome for female users with smaller hands to have complete control of the tool. Also- at the end of the cut-away, there is a tapered lip. This lip provides a great security during the ‘cigar hold’ by providing the user a stop.

Due to the nature of limited advertising to these groups, the logo and name are permanently molded on the flashlight itself through the grip features. This creates a strong brand identity. The rubber is also receded from the very tip of the lens area, revealing more metal. This is so it may still be used as a weapon in emergencies, causing enough damage- or creating enough time so the user (police) can access a better more sophisticated weapon for the situation.

Designer : Jessica LoVerso

Text from website:
Oculus is the first “design launch” of Schöpfer Yachts LLC. This 250-foot vessel was designed by E. Kevin Schöpfer, founder and owner of his namesake company.

Designed to accommodate 12 guests in extraordinary comfort and style, Oculus is a long distance cruising yacht capable of speeds upwards of 25 knots.

The exterior styling is representative of the jaw and eye socket bone structure of large oceanic fish and mammals. Featuring a dramatic reverse bow configuration, the yacht’s armature balances an elegant expression of symmetry and structure.

In addition to the bow, Oculus also features a “low rider profile”. This slightly lowered surface allows for new side recreational areas, alternate dockage access and light cruising openness. Lateral retractable side panels close this area when heavier wave action is indicated.

The interior features of Oculus focus on a 12 foot high ceiling in the main salon, a cylindrical double height dining room, central stair and elevator tube, and seemingly anatomical ceiling and floor lighting extensions giving definition to the seating areas.

The second level is the dedicated Owner’s suite. Living areas and bedchambers are divided by a series of four freestanding tubes, which house bath and storage necessities.

In addition to the main common stair, the second Owner’s stair connects to the third level aft private salon and deck / water feature.

The third level also contains the forward pilothouse and separate captain’s quarters. The generous open decks with separate water features are located forward and aft for convenient guest use. Specifications and plans are in the final stages of completion and will be posted at a later time.

Designer : Schopfer Yachts

[Press Release]
Honda FC Sport Design Study Suggests Hydrogen Sports Car Future

LOS ANGELES, Nov. 19, 2008 – Honda today revealed the Honda FC Sport design study model, a hydrogen-powered, three-seat sports car concept, at the 2008 Los Angeles Auto Show.

The FC Sport emphasizes the design flexibility and potential of Honda’s V Flow fuel cell technology – already deployed in the Honda FCX Clarity sedan – and reconfigures it into a lightweight sports car design with an ultra-low center of gravity, powerful electric motor performance and zero-emissions. The design study concept is inspired by supercar levels of performance through low weight and a high-performance, electrically driven fuel cell powertrain.

“The Honda FC Sport explores how to satisfy automotive performance enthusiasts in a world beyond petroleum,” said Dan Bonawitz, vice president of American Honda Motor Co., Inc. “People who love sports cars will still have a reason to love in a hydrogen-powered future.”

The high-output Honda fuel cell powertrain and a sleek, aerodynamic body contribute to the vehicle’s performance potential. A modular approach to fuel cell component packaging and the electric drivetrain contribute to the FC Sport’s low center of gravity with the majority of vehicle mass distributed between the axles, creating the balanced weight distribution sought after in sports cars.

The ideal placement of the Honda V-Flow fuel cell stack and related components demonstrates the benefits of a platform-specific, hydrogen-powered fuel cell powertrain. The FC Sport is configured to accommodate a custom-formed high-power fuel cell stack, located between the rear seats, and a battery pack placed low in the middle of the vehicle. The electric motor resides just forward of the rear axle. Two fuel storage tanks, visible from above, are located above the rear axle.

The optimal placement of fuel cell components for performance also allows for a relatively large passenger cabin by conventional supercar standards with enough space for three seating positions. The interior layout focuses primarily on the driver with a racecar-like center driving position. The enclosed canopy opens upward from the rear to allow for entry and exit. Two rear passenger seats flank the driver’s left and right side.

The sleek, low-profile body is designed to convey a high-technology appearance with sculpting that combines angular shapes in the front of the vehicle that taper into geometric, hex forms in the rear. The rear hex forms house cooling radiators for the fuel cell. Formula 1-style barge boards behind the front wheels enhance high speed aerodynamics and convey the vehicle’s racing pedigree. The hydrogen storage tanks, visible from the rear deck, showcase the FC Sports fuel cell technology in much the same way that a “naked bike” motorcycle showcases its engineering technology.

The glacier white body color conveys the FC Sport’s clean environmental aspirations while the dark wheels and deeply tinted glass provide a symbolic contrast befitting of the vehicle’s unique combination of clean power and high performance. Green construction techniques further contribute to a reduced carbon footprint. An organic, bio-structure theme is carried through to the body construction where exterior panels are intended to use plant-derived bio-plastics.

The Advanced Design Studio of Honda R&D Americas, in Pasadena, California, developed the FC Sport design study with the primary objective of using existing fuel cell technology as the basis for an ultimate Honda sports car. Designer Jason Wilbur led the design efforts.

Honda R&D Americas, Inc. began its operations in California in 1975 with local market research activities and has steadily grown its capabilities over the past 33 years to include all aspects of new vehicle design and development. Recent development efforts include trend-setting products such as the Honda Pilot, Ridgeline, Element, Civic Coupe and Civic Si.

In 2008, the company opened two new design centers in Southern California: the Acura Design Studio (Torrance), for the research and design of new Acura products; and the Advanced Design Studio (Pasadena), for the exploration and development of advanced design themes for both Honda and Acura.

The company operates 11 major R&D facilities in North America, including a full vehicle development center in Raymond, Ohio, and three design studios in Southern California. Honda R&D designers, engineers and support personnel are engaged in the development of Honda and Acura automobiles, powersports products, and power equipment for North America and global markets. The company’s main centers of operation include the Los Angeles Center (Torrance, California), responsible for market research, concept development and styling design; the Ohio Center (Raymond, Ohio), responsible for complete product development, testing, and support of North American supplier and manufacturing operations; and a dynamic test facility in Cantil, California.

[PRESS RELEASE]
GTbyCITROËN
CROSS OVER TO THE VIRTUAL WORLDWith GTbyCITROËN, a show-car presented at the 2008 Paris Motor Show, Citroën becomes the first vehicle manufacturer to cross over to the virtual worlds: An original take on a road car, GTbyCITROËN is a style replica of a vehicle from the digital world. The car is the result of a partnership between Citroën and Polyphony, designer of the driving simulation game Gran Turismo 5 on Playstation 3. Already shipped in more than 50 million units worldwide, Gran Turismo is renowned for its quality, design and realism.
In the game, GTbyCITROËN features an electric drive train powered by a fuel cell with no pollutant emissions. It is a car designed to square up to the strongest competition.

“GTbyCITROËN shows how the worlds of virtual and real-life motoring can join together to create a truly innovative partnership. We were delighted that Citroen approached us and gave us the opportunity to combine our creative strengths to build this very special concept car. To see the car take shape in game and then for real has been a truly unique experience as our work normally stays in the digital world. I just hope I can get behind the wheel of GTbyCITROËN and drive it on a real race track!” – Kazanori Yamauchi, President of Polyphony Digital Inc and creator of Gran Turismo

Performance first and foremost
GTbyCITROËN is geared to the world of motor racing, with its dynamic styling, sculpted lines and sharp graphics. The rear end is oversized, made exaggeratedly long in order to create an effect of retinal persistence. The idea is to make the concept car even faster visually. The white-to-grey gradation on the body side further underlines this impression of continuous movement.

Top-level driving
The cabin of GTbyCITROËN, designed to seat two adults, expresses the grand touring vision behind this show-car. The on-board ambience allies premium, extensively worked materials with a more high-tech effect for the driving position.

The layout of the low driving position was dictated by driving pleasure. The aim is for the driver to be able to concentrate on the road, assisted by a head-up display clearly displaying driving information.

RACING SPIRIT BY CITROËN

Power and flowing lines
The design of GTbyCITROËN reflects a quest for optimal aerodynamic design. The show-car is a vehicle of flowing, taut lines, stretched to the extreme. The cleanly drawn sides, ribbed at the top, and the pearlescent shade of the bodywork enhance the vehicle’s sleekly muscled looks.

The determined look of the front end is enhanced by wide air intakes and clear-cut horizontal headlamps. The headlamps feature penetrating blue LEDs in order to light the road effectively and keep rivals at a respectful distance! The chrome chevrons on the smooth bonnet express the Marque’s identity.

The carbon rearview mirrors on their finely profiled supports appear to be suspended as if to cleave the air, giving GTbyCITROËN an excellent on-road stance.

The large wraparound windscreen flows seamlessly into the roof and on into the rear mobile airfoil with its exaggeratedly long shape. The fast-flowing lines create the impression of a car in perpetual movement. The whole body expresses performance and continuous movement.

GTbyCITROËN also expresses strength and power through generous volumes, (length: 4.960m, 2.080m and height: 1.090m) underlined by strongly marked wheel arches. The diamond-effect 21-inch aluminium wheels enhance the car’s sporty personality.

Exceptional handling
The interior design confirms the vehicle’s dynamic and powerful style. The interior of GTbyCITROËN, designed to seat a driver and co-driver, expresses the racing spirit of this concept. The on-board ambience allies rich, premium, extensively worked materials with a more high-tech effect for the driving position, inspired by the world of motorsports.

Looking beyond the spectacular visual effect, the gullwing opening of the two doors gives GTbyCITROËN a level of accessibility rarely seen on this type of vehicle. The driver and co-driver can therefore slip into their seats and get out on the track as quickly as possible.

The dark interior of this show-car is a surprise, compared with the light bodywork. Upholstered in black leather with subtle touches of rare materials such as copper and steel, the cabin of GTbyCITROËN is distinctly sporty.
Two padded racing seats upholstered in dark leather, each fitted with a four-point harness, enfold the driver and passenger for exceptional driving sensations. Placed low down to highlight the impression of speed, the elegant seats are a perfect fit with the rest of the interior.The top-stitched leather of the door panels and floor adds to the opulence of the interior.

The driving position expresses the spirit of competition. The design was objectively guided by the motivation to win.

The dashboard, with its clean uncluttered design, flows into the receding lines of an imposing copper sculpture. The thrusting modern lines of the sculpture become the central tunnel of the vehicle, illustrating the power of GTbyCITROËN and appearing to catalyse its strength.

Created in a twist of this same copper sculpture, the leather-and-steel steering wheel also reflects the sporting spirit of the cabin.

To promote maximum concentration, the driver of GTbyCITROËN has a head-up display for driving information. Using red LEDs, this system projects key driving information – such as speed and navigation data – onto the windscreen in the driver’s direct line of vision.

The head-up display makes a significant contribution to safety with its direct read-out. Drivers assimilate data more quickly and do not have to look away from the road.

Aerodynamics optimised to combine performance and driving sensations
Special emphasis was placed on the aerodynamics and flowing design of GTbyCITROËN, these being key Citroën values. The objective was to enhance the vehicle’s dynamics and to create exceptional driving sensations.

Looking beyond its taut, dynamic lines, this racing car features innovative equipment such as enlarged air intakes at the front, a flat underside, and a mobile spoiler and air diffuser at the rear. All these features play an active role in reducing lift and – above all – drag, to pin the car to the ground.

With its flowing lines, original architecture and its use – in the game – of what is potentially the best environmental technology, GTbyCITROËN embodies the sporting spirit as seen by Citroën and underlines the Marque’s ambitions to meet new challenges.

NUVU: RESHAPING THE CITY

Within just a few years, cities all over the world will be at near bursting point. If mankind wants to retain the level of personal mobility it currently enjoys – and if the city is to survive – the only way forward is for a radical rethink of the type of cars driven there. One solution could be a car like Nuvu, designed for the city of the not-too-distant future.

“Nuvu is literally a ‘new view’ at the future of the city car. It is electric, of course, but as far as Nissan is concerned, for tomorrow’s city cars that is a given. No, the most important aspect of Nuvu is the interior design which provides great comfort and space in an intelligent package designed to make best use of our crowded roads and limited parking slots.”

François Bancon, General Manager, Exploratory and Advance Planning Department, Product Strategy and Product Planning Division, Nissan Motor Co., Ltd.

At a glance

- 2 +1 seating in compact 3m package
- Unique platform for Nuvu
- Zero emissions from EV drivetrain
- Drivetrain previews production EV due soon
- X-By-Wire control for all dynamic functions
- Extensive use of natural, organic and recycled materials
- An urban oasis complete with its own tree inside, which…
… provides shade for the interior, and
… generates solar energy via its ‘leaves’

Overview
There is about to be a seismic shift in the urban landscape. Within the next five to seven years, some 55 percent of the world’s population will live in the city, threatening total gridlock. Unless something is done, the irony of the phrase ‘personal mobility’ will be self-evident.

Look around at the cars in a typical city traffic jam today and the vast majority will have only one occupant and four empty seats. Some might have two occupants, a few three. But find one with four occupants or more and you’ll be doing very well.

Today, we buy a family car knowing that we’ll only ever need to use it to its full potential one or perhaps two percent of the time. Tomorrow, things will be different. Tomorrow, things have to be different.

“There is a new generation coming up who, finally, are questioning why we do the things we do. They are asking themselves, for example, why they are buying a large car when they know that for 99 percent of the time they will be in it on their own,” says François Bancon, General Manager, Exploratory and Advance Planning Department, Product Strategy and Product Planning Division, Nissan Motor Co., Ltd.

“It is our job to provide personal transportation that is better suited to people’s needs and to what the environment – in all senses – can cope with.”

Nissan’s vision for the future of urban transportation is encapsulated in Nuvu, a ‘new view’ of the type of car we will be driving in the middle of the next decade. Compact – it’s just 3 metres long – Nuvu is a concept vehicle with unique 2+1 seating. It is aimed at urban dwellers who don’t want to compromise on their personal freedom or their comfort, yet who appreciate that ‘something has to give.’

Nuvu is agile, easy to drive, even easier to park. And it is, of course, an electric vehicle (EV). As Bancon says: “We believe zero emission vehicles are one of the key solutions for tomorrow’s city car.”

Nuvu is described as a moving oasis, a haven of green tranquillity in the urban jungle. To underline this message, Nuvu incorporates a witty representation of its green credentials: across its all-glass roof are a dozen or so small solar panels. Shaped like leaves on a branch, the power they generate is fed to the battery using a ‘tree trunk’ within the car as a conduit. Nuvu also uses natural, organic and recycled materials within the cabin.

Nissan has already announced plans to introduce an all-electric car in Japan and the US in 2010 and to mass-market it globally in 2012. Nuvu is not that car, though it does share some of the technology that will feature in the planned production vehicle. Rather, it is a concept of how a Nissan EV might look in the near future.

In the longer term, Nissan foresees a future based around a line-up of zero emission vehicles regardless of their size, category and usage. Nuvu – or its production equivalent – is just one element of this emission-free future.

Nuvu in detail
The central thrust behind the development of Nuvu is not its motive power but its layout and use of space. Nuvu has been created for a city of the future, one that’s even more crowded than today.

That’s why it’s compact on the outside yet roomy on the inside. Built on a unique platform, it’s just 3 metres long and sits on a wheelbase of 1980 mm but is 1700 mm wide and 1550 mm tall to create a large and airy cabin.

Interior package
These dimensions provide all the interior room needed for the vast majority of city journeys. Nuvu has two regular seats and a third occasional chair that can be folded down when required. But, unlike some two-seater city cars currently on the market, it is a thoroughly practical proposition with an integral luggage area providing sufficient space for a typical supermarket or shopping expedition.

“It is a real car,” says Bancon. “There would be no disadvantages to using a Nuvu everyday. For the vast majority of users, three seats are more than enough most of the time.”

The packaging is designed to give priority to driver comfort with C-segment levels of space and the flexibility to invite one or two passengers on board. Cabin layout places the regular passenger seat beside but largely behind the driver’s seat, allowing the passenger to stretch right out. Ahead of this seat is a third occasional chair which, when not in use, is folded away into the dashboard assembly. But even when the third seat is in use, there remains sufficient legroom for both passengers.

In the interests of saving both weight and space, the third seat has a centre section made from hardwearing yet comfortable netting. This hammock-like approach also has the benefit of allowing cool or warm air to circulate around the occupant’s body for extra comfort.

Shopping bags, briefcases and smaller items of luggage can be stowed behind the driver’s seat while if the driver is travelling solo, larger items can be stowed in the passenger footwall.

City car research
“We did a great deal of research into how people use their cars in the city. We found that for 90 percent of the time, the driver was alone. For five percent of the time there was one passenger and for four percent of the time there were two passengers. You can do the math to find out how often four or more people were in the car!” says Bancon.

“We gave the second seat much more room than normal because when you take one passenger in your car it is usually someone you love and you want to make sure he or she is being carried in outstanding comfort,” he adds.

Natural materials
Many of the materials used inside Nuvu reflect an increasing concern for the environment. The floor is made from wood fibres pressed into laminate sheets and is studded with rubber inserts made from recycled tyres for grip.

To create a light and bright interior, the windscreen and roof merge into one extended panel running virtually the entire length of the car. But undoubtedly the most unusual feature of the interior is the ‘energy tree’ which rises from the luggage compartment floor to the roof behind the driver’s seat.

Solar panels
The energy tree is shaped like a thin trunk. As it reaches daylight it branches out under the glass roof providing occupants with protection from bright sunlight… just like a real tree. And providing a visual reminder of Nuvu’s green credentials, covering the branches are dozens of small solar panels shaped like leaves.

The panels absorb energy from the sun which is then fed back down the energy tree and used to help recharge the battery and provide an extra power boost for the electric motor. As well as being genuinely green energy, it is estimated that the power generated via the solar panels will save the equivalent of one full overnight charge from mains electricity each month.

Driver controls are as simple as possible. All the major functions – steering, braking, transmission and throttle – are ‘By-Wire’ while the steering is controlled by an aircraft-style steering yoke: with just one turn from lock to lock, the steering is very direct for agility and manoeuvrability in the city. Nuvu’s turning circle is just 3.7 metres. Thanks to its wide track and the use of 16 inch 165/55 tyres mounted on lightweight, almost transparent, wheels, ride comfort, stability and agility is of the highest order.

There are two pedals – for stop and go – stalks for minor controls and a digital instrument panel with dials for speed, distance covered and battery range. The instrument panel itself is formed of layers – rather like an onion – and like the energy tree is another example of design inspired by nature. “We call it bio-mimicry,” says Bancon.

Rear view/parking monitor
Two screens on the dashboard display the view behind the car – there are no door mirrors to disturb the airflow, but small cameras – and double as monitors for the Around View Camera which give a bird’s eye view of the car when manoeuvering or parking.

Saving energy was the guiding force behind the use of low-energy LED head and tail lamps, while Nuvu’s heating and ventilation system filters and cleans the city air as it passes through the vehicle. Not only does it produce no emissions at source, but Nuvu actually helps clean up the city environment.

Exterior and interior design
“Nuvu’s design is further clear evidence of Nissan’s continued desire to challenge convention and to explore all the possibilities that the EV could bring us. In many ways it was inspired by our two most extreme EVs of recent times: Mixim and Pivo 2.

“Significantly, though, Nuvu delivers a more realistic interpretation of two of the most important aspects of its forerunners – the ‘Friendly Innovation’ found in Pivo 2 and the ‘Sports Dynamics’ central to Mixim

“The result? We have designed a radical concept car that with just a few changes could go into production tomorrow,” explains Masato Inoue, Chief Designer, Product Design Department, Nissan Motor Co., Ltd.

Developed by designers at Creative Box Inc. – Nissan’s design think-tank – Nuvu’s green house has flowing lines with gentle curves inspired by nature. The distinctive shape of the door glass on either side gives the impression of a hot air balloon that’s being gently inflated by pressure from within, while tropical fish inspired the profile of the side window graphics as a whole.

This contrast between the natural, fluid shape of the greenhouse and the strength implied by the solidity of the lower body gives Nuvu a feeling of quality rarely found in a compact car.

Colour and materials
Nuvu’s visual impact is further enhanced by its unique body colour. Developed by Nissan Design, the shade is officially called Soft Feel Sandy Gold.

Matching the ecological values of an electric vehicle, the moulded plastics and synthetic elements found inside a typical production car have been replaced by natural materials and organic alternatives, such as the wood fibres and rubber from car tyres used for the flooring. The result helps create a relaxed, warm atmosphere within Nuvu’s cabin.

During the design development stage, key targets were to develop an EV that encompassed obvious modernity with engaging ambience and a playful aspect – hence the energy tree. “You don’t need to be a car lover to fall in love with Nuvu,” adds Bancon.

EV drivetrain
Nuvu is more than a styling concept of a future EV. It is a fully working mobile test bed for much of the technology that will be used in Nissan’s production EV to be launched in 2010. For this reason elements of its technical specification are being kept secret for the time being.

The electric motor used in Nuvu is mounted at the rear of the vehicle and drives the back wheels, though neither its exact specification nor the power and torque figures are being released at this stage. A driving range of 125 kms and top speed of 120 km/h are being made public, however.

Li-Ion battery
Similarly although it can be revealed that the batteries used are of the latest laminated lithium-ion type and have a capacity of 140 Wh/kg (watt-hours per kilogram), the total capacity of the batteries and number of modules are not being disclosed at this stage.

Nissan began research into high output Li-Ion cells as long ago as 1992, but today development is carried out by Automotive Energy Supply Corp. (AESC), a joint venture company set up by Nissan and NEC Group.

Unlike a conventional lithium-ion battery with its bulky cylindrical cells, the laminated Li-Ion battery as used in Nuvu has thin laminated cells and fewer components overall. This boosts its power by a factor of 1.5 at the same time as halving its physical size. It also remains twice as efficient as a conventional cylindrical Li-Ion battery even after five years or 100,000 kms of continuous usage.

Another bonus of the compact cell construction is that a thin modular design is possible with a commensurate improvement in battery cooling efficiency. Higher power outputs are achieved through material improvements made to its lithium manganate positive electrode and carbon negative electrode. The use of chemically stable spinal-structured manganese for the positive electrode also helps ensure safe operation.

Its compact size allows the batteries to be mounted under the seats and the vehicle’s flat floor, thus helping to keep the centre of gravity as low as possible.

A quick charge from empty to full should take between 10 to 20 minutes while a full charge should take between three to four hours from a domestic 220V socket.

Typical users
“The people who will be drawn to a car like Nuvu are many and varied,” says Bancon. “It is a cross generational car and not a signature vehicle for one generation.

“There will be common threads, however. They will be early adopters but more importantly they regard themselves as urban citizens. They don’t just work or live in the city; they are part of the city. They want a car that somehow expresses who they are and which reflects their personal ideology.”

Conclusion
Although clearly a concept vehicle exploring aspects of future vehicle design, Nuvu nevertheless embodies many messages for today. Its clever interior provides ample headroom, legroom and comfort for most everyday needs without occupying more road space than it needs.

The use of recycled and natural materials underlines Nuvu’s environmental message and while the energy tree might be considered as a piece of whimsy, the use of solar energy is an entirely sensible and practical technological solution to aid an emission free future.

“Nuvu is a concept car, for sure, but it is an entirely credible vehicle,” says Bancon. “It is light, clean and easy to drive. It is practical and a sensible size, yet it is also embodies an element of fun: the future doesn’t look so bad, after all.”

Designer : Nissan

The concept is initially aimed for a low income housing area in Redfern, a destitute inner-city suburb of Sydney. The architect’s main objective was to make sure that the traditional 19th century workers cottage aesthetic would not be overrun by a newly introduced aesthetic.

Construction of the Redfern scheme is due to commence in late November. EnterArchitecture will be working on similar projects with the Western Australian Government for a remote housing cluster and also for a client in the Emirates.

Designer : EnterArchitecture