The E-bike has been designed with airless tires, robust tubular construction and shaft drive, ensuring durability, while the luminated front bar and dazzling graphics increase the visibility and safety for the rider. E-bikes have designed to be folded quickly and intuitively by the user and deposit it into the storage modules after arriving to a transit hub. RFID technology has been utilized to charge the users on their Oystercard according to the amount of E-bike rental time. When docked, E-bikes act as hub seating and get charged for the next renter.

Transit hubs optimize the traveler’s transitional experience between renting bike schedule called Bikeshare and boarding on a bus. The hubs provide real time transit schedule by allowing access to the Bikeshare. The Ionic modular design provides the concept with distinctive architectural identifiers all through the cityspace, increasing both the desirability and visibility of city public transit. During the time passengers board on a bus, its ultracapacitors get charged until next stop via a small arm extended from the hub. The busses collect and disperse E-bikes according to demand, effectively diminishing the need of third party distributors.

The electrical modular buses aim to optimize the needs of next generation commuters by providing ultimate convenience for public transit. The specialized interior space addresses the diverse needs of passengers. The compact and ergonomically bended seating arrangement provides a safer environment for seat occupiers and the standing passengers downstairs for short distant travel. On the other hand, long-distance travelers and tourists will be able to enjoy the city from panoramic second floor.

Designer : Gabriel Wartofsky

Kenneth says :
Shake is a mp3 player that can be charged by shaking when the HOLD function is on. With HOLD off, the user shakes the player for PLAY/PAUSE. The action of shaking the player to play or charge it is similar to shaking a pocket watch to wind it. The similar semantics provide an interesting yet familiar experience of giving life to an electronic device.The form of Shake was developed based on the language of a pocket watch, not only through the operation of shaking but also visually. Using the form from an established typology, Shake provides a comforting familiarity in a sea of electronics with foreign shapes and forms.

The use of kinetic energy to charge the battery not only solves an environmental issue, but also a more personal one. In situations like a long commute home, the user can enjoy personal audio without worrying about the battery dying out.

An electromagnetic coil is connected to the battery, converting kinetic energy into electrical energy that charges the battery. The player connects to the computer via a USB cable through the headphone jack, facilitating the transfer of songs as well as the conventional method of charging.

Shake would utilize kinetic energy generation technology developed by start up company M2E Power. M2E’s micro-generator technology delivers 300% to 700% more power than existing kinetic energy solutions (according to the company’s website), harvesting sufficient energy from normal daily and mechanical motion to power a wide range of mobile electronic devices.

This technology allows Shake to charge even in the user’s pocket while he/her is walking around.

Designer : Kenneth Tay

Text from David:
Transportation is a key factor in our urban environments and most of our cities are now developed to match the scale and needs of cars, and car users. This reality raises issues regarding sustainability and environment, energy consumption and quality of life.

So, “How can public and personal transports be redefined in a sustainable way, delivering a sense of personal space and independence to its users?” This was the title of my Master of Science in Design and Transport Thesis, concluded in Coventry University, UK, with Distinction, in September 2008.

In other words, the aim of this project was to develop guidelines and a holistic solution for a new system of urban transport, composed of vehicle and infrastructure, in a sustainable way and adaptable to various urban environments.

To develop the project I needed information about: user’s behaviors and explanations for them; main trends; analysis of existing solutions and identification of their problems; definition of applicable technologies in a sustainable manner in a near future. This information was gathered through an online questionnaire, statistical data from several sources, literary research, internet articles, pictures, video and expert interviews and then compiled in my final report.

Preliminary research indicated that several attempts to tackle the issue of mass transportation are being tested and implemented throughout the biggest cities on Earth. Several solutions exist already, but people always seem to give preference to a personal vehicle of some kind to move, commute or make quick trips. Only when there is no other choice, people seem to engage in public transportation. Personal transport is the preferred mode of use and this is a trend that keeps increasing.

The conclusion of the thesis report was composed of guidelines and design specifications that served as basis for the development of a new type of transportation that is truly sustainable and that meets people’s requirements. This generic solution was exemplified through a typical design project that will act as future reference and that goes by the name of “SCARAB”.

PROJECT DESCRIPTION:
VEHICLE:
- The vehicle allows users to have freedom of use much like a motorcycle but with the convenience of having an enclosed private space and luggage compartments.
- The vehicle can be operated in several different positions depending on speed. It is parked vertically for easy ingress and egress and optimization of public space. When in speed position, the vehicle also tilts when curving or changing direction.
- When circulating in dedicated pathways, the SCARAB is controlled by a centralized computer or by a traffic management centre. Outside of the dedicated pathways the SCARAB is controlled by the user just like any other vehicle.

VEHICLE SPECS:
-The vehicle is composed of interchangeable modules that can be customized by the potential buyer/user.
-Powerpack module composed of a permanent battery plus 3 options for the main energy pack (battery, biofuel ICE or a fuel cell).
-4 wheel drive through electric brushless in-wheel motors with directdrive.
-Wheels with regenerative braking through EW Brakes.
-Drive by wire and tactile HUD embedded in the Lexan canopy.
-Structural elements in Carbon-Aramid composite.
-Embedded sensors, Lidar, radar, transponders, GPS. These serve to exchange information with the system, with other drivers and to have precise location data.

INFRASTRUCTURE:
-Communication nodes spread through roadways and traffic management centres in major conurbations.
-Dedicated paths with electromagnetic transponders embedded in the road.
-Parking facilities with solar/wind power generators.
-High speed/long distance travel provided through a railroad interface (not yet developed).

SYSTEM:
-Renting of the vehicle or modules that allows for a private/public/mixed utilization and transport access for people with less financial resources.
-Doesn’t need new infrastructures (uses the existing roads).
-Is backward compatible with current transport systems and uses current day technologies.

Designer : David Miguel Moreira Gonçalves

Text from designer :
The aim of this project is to design an innovative transportation concept, which co-operates with public transport to provide ability to commute without the need of transit between more than one types of public transport.

The design solution generated as the result of this research project is personal commuting assistant, named ‘Freewill Urban©’. This design concept is a collapsible, personal commuting vehicle used to assists daily travel for the journey between the train station and its user’s destination.

Environmental sustainability is considered with uses of rechargeable electric powered concepts to reduce the amount of pollution created from gas emitting vehicles in the city. This product is aimed to encourage commuters to travel by public transport, which reduces the need of commuters to travel by their private vehicle into the city. By doing so, it reduces the amount of pollution generated by private vehicles traveling in the city.

Designer : Jinn Wong

Bearing those discoveries in mind, Gosha Galitsky set to design a bicycle which will operate seamlessly with public transport. It might not fold to the smallest possible size as other bikes of the same nature do, but when it is folded, there are no sticking-out wheels, sprockets or cables that can get entangled with other passengers and make them dirty. The delicate (and greasy) components are all enclosed inside the suitcase-like body of the bicycle, forming a neat rectangular package that can fit easily between your legs when you ride the subway or on the luggage rack in the train. You can even lock it in place so you can snooze through your commute without worrying about the bike being stolen. When you get off and need to get out of the station, the bike can be easily dollied along using the small front wheel. And when it is unfolded, you can ride it just like any other bicycle.

Designer : Gosha Galitsky