Unlike the traditional ventware systems, both the filter units and plates of RKS can fit easily into a dishwasher for easy cleaning. The Season Cooktop Ventware eliminates the possibility of getting outdated after few years since the replaceable face is available not only in different colors, but also in different styles.

This innovative kitchen model creates a wide range of designs at low cost, while offering an economical way for users to update and refresh the décor of their kitchen. It doesn’t matter if it is adding complementing countertops, accent color, or celebrating holidays, this ventware brings a brand new kitchen atmosphere through ultimate customizability.

Designer : RKS Design

Designer : Litl

Explanation from Petr:
The exhibit is an active relaxation and rehabilitation bath with special features that permit the changeability of water volume (0-410 L) and provides a pleasant form of relaxation due to its continual and smooth changes to the ergonomical shape of the structure. The bottom contour of the bath adjusts in order to conform to the required position and height of the user. The various geometrical changes to the shape enables the bath to be “shortened” for example, creating a backing for the legs in order to maximize on comfort.

For the purpose of saving on water consumption, one can simply change the depth of the bath so it becomes shallow or select a shape that is most suitable for the user. The changes to the shape of the bath floor can be modified & readjusted anytime. Another wonderful trait of the bath is that it is equally convenient for bathing children, because one can adjust a safe depth of bath, reducing risk of drowning as well as being equipped with soft finish of the base. In addition to creating minimal dimensions, the bath itself can be used as a baby changing table. Getting in and out of the bath tub is simple and effortless. There’s no need to climb over edges of the bath. This way, it is beneficial for people with physical disability or those completely immobile.

Uniquely, in this bath we can experience an unmissable feeling of soft, rippling of the bath floor during bathing or when having a massage. This is a new form of relaxation which we can daringly refer to as “kinetic therapy”. The type of technology used forms system of 10 pneumatic pistons (compressed air powering pistons) and includes inclinable segments covered with soft upholstery. This lining creates a pleasant feeling without causing pressure on the body even in the case when the bath is low filled or during the filling or draining of the bath tub. The movable segments are covered by special, highly elastic, hygienic and strong foil (used in the concept of BMW Gina. The geometric shape of the head rest can be partially changed and is also made from movable structures, covered in flexible foil. The type of material`s used are synthetic rock (e.g. ceramics, plastic shroud), glass, elastic foil.

Other systems used are classic hydro/air massaging jets capable of being rotated and powered by electric motor. The connection to mains water supply, water outlet, air and hydro massage jet is through flexible hosing. The bottom of the tub is sealed and the whole base can be raised or lowered over a flat surface of the inner side-panels of the bath. That is how water tightness is ensured.

Everything is controlled electronically with a remote control. As a result, it is possible to select filling/draining of the bath, change water temperature, adjust hydro/air massage settings (duration, intensity, cycle program) and change the shape of the bath floor whit comfortably resting in the bath tub. This is done with the help of sensor button on the display of a remote control. The geometry of the bath can be altered simply by means of accessing touch display screen on the remote control. Naturally, the program remembers previous settings and if the conditions allow, the bath immediately fulfills the command of the user. Simultaneously however, whilst making the change, the height of the water surface, its volume and temperature as well as the total water consumption is electronically monitored.

The filling of the bath is possible through water inlets positioned right beneath the head rest, whilst draining is carried out through the segment located in the middle of the bath tub. If we were to come back to the principle of shaping the bath floor, an alternative method exists, which replaces pneumatic pistons and electrically tilted segments with air pouch system (ballonet). In addition, the foil covering the surface of various segments can also be replaced with a variety of other materials available on the market, that have similar properties.

Designer : Petr Kubik

The inspiration of the project was to attract more and more people as candle users in a more functional and stylish manner. The outcome is a compact, lightweight and ultra-portable lamp that has the required coverings for safety, visual elegance for style and easy and functional method of working for convenience, in short, a great handy tool for household.

Designer : Simon Enever

The Faucet comprises five arms with different functionality such as three of them are supplying water, liquid soap and toothpaste, and the last two acts as driers. The Rocstar top is made of transparent plastic with lighting underneath which acts as control sensors and allow users activating a particular arm by simply touching it. After being activated that arm will give a magnificent led light and smoothly turns to the user. Other activities such as changing the water temperature, screen savers and profile colors, driers, etc. can be done with the center top touch screen of the Rocstar.

The basin has been designed to protect the users from viruses and other diseases that the users might infected with usual basins. Moreover, the color of the basin can be changed with the led effects and can be programmed to change the color every time someone enters into the bathroom. More surprisingly, the color of the spot where the water drops on the basin can be changed as well. There are exterior buttons on the stainless steel area on the basin that can control the covering and sterilization procedure and selecting profiles.

The mirror includes a digital camera which can be controlled from the rocstar through wireless system to know different previous conditions of your skin color, pimples, medicines, etc. The mirror will capture your photo every time you go to the bathroom which can be reviewed later for comparison. Hany Mansour, the designer, welcomes youto give any critics and suggestions. You can contact Hany here: COMISSARDAYS@YAHOO.COM

Designer : Hany Mansour, you

Text from Adam :
There are over 400,000 reported drownings and 8 – 10 times as much near drowning experiences worldwide every year. In the UK there are 500 annual drownings. These figures have remained the same for nearly 20 years which tells us that any current equipment and practice is not having the required impact to reduce these numbers.

I have been a beach lifeguard for a number of years and further primary and secondary research has shown that there are a number of key problems that reduce the survival rate of beach users.
These problems are:

• Slow response time
• Surveillance
• Lifeguard safety
• Human limitation of lifeguards

From this research it was decided to look to the future to see what could potentially be new directions for beach safety equipment, this design is therefore based for the year 2020.

The design process was in close collaboration with the BSA (British Surfing Association) headquarters in Newquay (UK). Starting with brainstorming where no idea was a bad idea, followed by concept generation and a wide variety of modeling and system/ scenario testing, the design took innovation from nature, new and existing technologies and user testing.

Explanation of final design

The ‘Mantra’ lives on the sea bed during peak seasons just off the coast of beaches; it uses small hairs on its surface to collect and store energy from tides and waves (called ‘Super Cillia Skin’). It detects distress and drowning using electro sensors coupled with sonar which even today are highly sensitive, for example heartbeats and movements can easily be monitored. When a casualty is detected it swims up to 15mph using SMAs in the wings. The victim is carefully picked up onto an inbuilt stretcher where they are carried on top the water using hydrofoils and impellers. The ‘Mantra’ is always in constant communication with lifeguards and so is met at a specific beach location by lifeguards and ambulances where an EAP is in place and the stretcher is removed without disturbing the patient, who in the worst case scenario may have neck injuries.

Stretchers are replaced and the ‘Mantra’ can assume its position at sea once more. The whole process is estimated to take under 2 minutes.

The final design as can be seen from images, uses biomimicry from a manta ray for many reasons –

• Large flat surface area for all weather stability
• Excellent turning circle and manouverability
• Excellent strength to weight ratio
• Low energy travel
• Considered as a non aggressive creature/ form

Advantages of ‘Mantra’:

• Removal of contact with bodily fluid
• Safety of lifeguards
• Immediate response time
• Completely automated
• Better for spinal and other injuries
• Aesthetics
• Function
• Sustainable

Designer : Adam Scott

Designer : Yaroslav Rassadin

From the website:
LIMITED EDITION OF 24 PIECES
An exceptional mechanism created by Mathias Buttet – founder of Confrérie Horlogère – for the Only Watch 09 auction: an event that takes place every two years and is aimed at raising funds to help children affected by Duchenne muscular dystrophy.

Touched by the devastating effects of this disease, Mathias Buttet has developed a Vertical tourbillon watch which features a hand-wound mechanical movement able to make the time last longer for those who don’t have much of it. Moreover, the prototype developed has been enriched with a further function allowing users to shorten the time if they so wish.

Designer : Confrerie Horlogere

Starting from the package I received, a cool sleek package with the heading “Audio Revolution in a Box”, which really enhances the attention. I have opened the package and yeah I got a bit disappointed since almost all the portable speakers come in a pair. Well I must say this feeling got away as soon as I plugged in the little monster with my iPod. But still, I wish I had 2 X-Mini 2nd Generation speakers to make better comparison with X-Mini Max. [Buy it here]

The compact, innovative, capsule shaped design combining with the superb sound clarity it delivers through its large 40mm driver; this is a perfect audio enhancement that can make any sort of music or video player into an individual or group entertainment point. If features high capacity rechargeable battery that can offer around 11 hours of continuous playback which is three times more than its predecessors.

Since I have only one X-Mini 2nd Generation, I couldn’t check but found online in several reviews of this speaker that it can be connected to another and so on, forming a bass-enhanced, self-powered chain of speaker system. This is obviously a cool feature which is quite rare too. In fact to get the experience, I am already searching if any of my friends bought it. It features a built-in volume control too which I personally prefer to keep in max and adjust the volume as much I want from my media player. The LED light shows that it’s turned on.

When it comes about the cables, it is handy in many ways. The main connecting cable has three ports; the mini-USB end goes to the speaker, the 2.0 one goes to the pc and the 3.5mm jack to the media player, whether it’s an iPod, MP3 player or a laptop. Aside from that, the speaker contains a tiny audio connecting cable that can be neatly tucked into the base. Even though, the minimum use of wire has eliminated the hassle a lot, I just wondered a wireless connection using Bluetooth or Wi-Fi or any other means would have made the gadget out of the world.

The size of the speaker is really tiny. I’ve compared with few other portable speakers online, say for an example its cousin X-Mini Max II, and have found it the tiniest among all others of the same range. Moreover, the balance of convenient portability and great sound quality has been done perfectly and accordingly a user would like. The thing I like most of my X-Mini 2nd Generation speaker is its extendable vacuum that imitates the feel of a sub-woofer; you can feel the vibration distinctly when it is playing on your hand, which is able to produce bass and volume over around ten times of its physical size.

Overall, the X-Mini 2nd Generation speaker seems very much stylish with me and everyone I’ve shown it has praised its design and performance. I really loved the speaker and considering the tiny shape and reasonable price, I will surely consider buying one more to get louder sound experience. [Buy it here]

From : X-Mini

Designer : Karim Rashid