Future Technology » Search Results » lifter

Transport Heavy Items with Special Designed Helicopter

TheFuture — Thu, 23 Apr 2009 13:43:59 +0000

Use of Helicopters for lifting heavy items are not that trendy in the recent world but still there is always a need of a helicopter that can lift gigantic items for easy and quick transportation. This heavy lift robotic helicopter concept was designed during last 2008 with keeping giant lifting capabilities in mind. The innovative design will let the helicopter to pull a remarkably high object and the placing of the propellers have made them easy movable to offer better control. Both of the landing beams are supported with three hydraulic legs that can increase or reduce the height of the giant lifter.

Jon says:
The basic principle for the helicopter is to serve in the military as an unmanned helicopter to help out the construction crews build bases quickly. Dual propellers mounted on either side give stability as well as an incredible amount of lifting capacity considering the size of the vehicle. It’s just near the size of an average sedan but could easily lift a military grade hummer or whatever supplies the crew/troops need.

Maneuverability is key and so the engine pods can pivot in any direction needed to fit into small spots or to find its way through a city. Two cables come down from both ends of the vehicle to attach onto the object needing transport. The landing gear can also be used to pick up objects or to give the object some stability when in motion.

Designer : Jon Russel

Levo : Hospital Transport Chair

TheFuture — Thu, 14 Feb 2008 04:35:33 +0000

Do you know that based on research, the collapsible transport chairs are difficult for the uninitiated to open or close ? And by horizontally stacking the chairs, space-saving is increased by a third and the chairs are always ready to use. Based on that goal and the high volume patients in a Mega Hospital, Aaron Daley designed “Levo” to address the need for conspicuous storage and intuitive usage.

Levo also removes the traditional mechanical adjustments such as the collapsible footrests and replacing them with a single foot platform, which make Levo becomes a safer and more intuitive experience. The platform serves as both a leg-lifter and a brake, thus eliminating the need for unnecessary bending. This benefits the patient and the attendant pushing the chair.

Designer : Aaron Daley

Renovatio Concept by Confederate Motor Company

TheFuture — Mon, 20 Aug 2007 13:00:19 +0000

I’m a little bit confused with this motor design, where do I sit ? This renovation concept by Confederate Motor Company uses minimal machine, using the fewest pieces, moving parts and systems to accomplish its dynamic mission. The word “Renovation” itself means rebirth, which also represent the rebirth of their headquarters company after destroyed by Hurricane Katrina. The Driving concept was the creation of a conceptually flexible foundation to allow a place for growth and further iteration; a utilitarian modular flexible foundation.

Conceived by the leader of our conceptual design team, Mr. Ed Jacobs, the motorcycle is at once primitive, bohemian, and yet highly technical. Renovatio is un-compromised, light weight, possesses enormous torque, is capable of extreme performance, yet has maximum real world streetable active safety. It is graceful in motion, yet potentially brutal. It exudes inner beauty through absolute follow through of truth of concept. Renovatio has great proportions, holistic brand gestalt, is original, impactful, alluring and elegant

Specification :

Dimensions:
Weight: 340lbs.; Wheelbase 60″; Seat Height 30″; 27 degree rake.

Engine:
103 cubic inch Confederate Water cooled 90 degree utilitarian modular platform
150 HP normally aspirated – 190 HP optional supercharger

Transmission:
Confederate design; six speed, close ratio.

Primary:
Internal gear driven

Front End:
Girder-type aircraft aluminum and titanium multi-link with
shock centered on steering axis; Carbon fiber struts.

Swingarm:
Single sided aluminum cast piece.

Suspension:
Rear-Penske coil over shock with remote reservoir multi adjustable; Front-Penske coil in shock, multi adjustable.

Lighting:
Forward LED headlight and blinker system; integrated into girder.

Fuel Cell:
Confederate design, one piece composite fiber cell;
Fuel Capacity 4.5 gallons with integrated air box.

Gauge:
Single integrated tachometer and speedometer.

Wheels:
Blackstone structural carbon fiber.

Identification:
Engine & Neck contain ID numbers.

Preliminary Engine Specifications:
Type: V-twin

Displacement: 1686 cc (103 cu. in.)

V-angle: 90 degrees

Compression ratio: 11.0:1

Valve configuration: Over head valves, 2 per cylinder

Valve lifters: Hydraulic roller

Bore x stroke: 108 x 92mm (4.252 x 3.622 in.)

Fuel system: Sequential fuel injection

Fuel Type: Premium unleaded

Horsepower: 135 hp (SAE Certified)

Torque: 125 lbs-ft (SAE Certified)

Fuel shut off: 7800 rpm

Block: 356-T6 Sand cast aluminum

Cylinder bores: Liner-less Nicom coated parent aluminum

Cylinder head: 356-T6 Sand cast aluminum

Intake manifold: Carbon runner, dual throttle body

Exhaust manifold: 321 Stainless steel headers

Crankshaft: Billet 4340 steel

Camshaft: Billet 8620 VAR steel

Connecting rods: Forged Powder Metal Titanium

Pistons: Forged 4032 Aluminum

Valves: Forged titanium

Futuristic Dodge Tomahawk Motorcycle Concept

TheFuture — Thu, 09 Aug 2007 14:44:09 +0000

The Tomahawk is a Viper V-10 based motorcycle, a 500 horsepower engine with four wheels beneath it. The engine breathes through twin throttle bodies mounted right up front. The Tomahawk concept is an awesome-sounding machine. Clouds of blue smoke vied for attention with the throaty rumble of the mighty V-10, and hitting the gas visibly opened the twin throttle body blades up front where the headlight would normally be. Though deeper and more rumbling than most motorcycles, it did not seem to be louder overall – just deeper and less shrill.

The Dodge Tomahawk can reach 60 miles an hour in about 2.5 seconds, and has a theoretical top speed of nearly 400 mph. Each pair of wheels is separated by a few inches and each wheel has an independent suspension. Bernhard said four wheels were necessary to handle the power from the engine.

Engine
1. 500 bhp (372 kW) @ 5600 rpm ( 60.4 bhp/liter); 525 lb.-ft. (712 Nm) @ 4200 rpm
2. 10-cylinder 90-degree V-type, liquid-cooled, 505 cubic inches (8277 cc)
3. 356-T6 aluminum alloy block with cast-iron liners, aluminum alloy cylinder heads
4. Bore x Stroke: 4.03 inches x 3.96 inches (102.4 x 100.6)
5. Two pushrod-actuated overhead valves per cylinder with roller-type hydraulic lifters
6. Sequential, multi-port electronic fuel injection with individual runners
7. Compression Ratio: 9.6:1
8. Max Engine Speed: 6000 rpm
9. Fuel Requirement: Unleaded premium, 93 octane (R+M/2)
10. Oil System: Dry Sump; takes 8 quarts Mobil1 10W30 Synthetic
11. Cooling System: Twin aluminum radiators mounted atop engine intake manifolds, force-fed from front-mounted, belt-driven turbine fan.
12. Takes 11 quarts of antifreeze.
13. Exhaust System: Equal-length tubular stainless steel headers with dual collectors and central rear outlets.

Suspension
Front:
Outboard, single-sided parallel upper and lower control arms made from polished billet aluminum. Mounted via ball join t to aluminum steering uprights and hubs. Five degrees caster. Single, fully adjustable centrally located coil-over damper (2.25-inch coil with adjustable spring perch); pullrod and rocker-actuated mono linkage. Center-lock racing-style hubs.

Rear:
Hand-fabricated box-section steel inboard swing arms, incorporating “hydral-link” lockable recirculating hydraulic circuit parking stand. Single fully adjustable centrally located Koni coil-over damper (2.25-inch coil with adjustable spring perch); pushrod and rocker-actuated mono linkage. Center-lock racing-style hubs

Performance
0-60 mph: 2.5 seconds (est.)
(Some estimate 1.9)
Top Speed: 300+ mph (est.)

Dimensions
Length: 102 inches
Width: 27.7 inches
Height: 36.9 inches
Wheelbase: 76 inches
Seat Height: 29 inches
Weight: 1,500 lbs.
Track, Front: 8.75 in
Track, Rear: 10 in
Weight Dist: 49F/51R
Ground Clearance: 3 in
Fuel: 3.25 gallons

Transmission
Manual, foot-shifted two-speed
Aluminum-cased two-speed, sequential racing-style with dog ring, straight-cut gears
Gear Ratios: 1st 18:38; 2nd 23:25
Clutch: Double-disc, dry-plate with organic friction materials, hand lever actuated with assist
Final drive: Dual 110-link motorcycle-style chains
Front Sprockets: 14 teeth
Rear Sprockets: 35 teeth
Longitudinal, centrally mounted engine, rear-wheel drive layout; monocoque construction, engine is central, stressed member. Body of billet aluminum.

Price
$555,000