Designer : Dan Anderson

Explanation from Petr:
The exhibit is an active relaxation and rehabilitation bath with special features that permit the changeability of water volume (0-410 L) and provides a pleasant form of relaxation due to its continual and smooth changes to the ergonomical shape of the structure. The bottom contour of the bath adjusts in order to conform to the required position and height of the user. The various geometrical changes to the shape enables the bath to be “shortened” for example, creating a backing for the legs in order to maximize on comfort.

For the purpose of saving on water consumption, one can simply change the depth of the bath so it becomes shallow or select a shape that is most suitable for the user. The changes to the shape of the bath floor can be modified & readjusted anytime. Another wonderful trait of the bath is that it is equally convenient for bathing children, because one can adjust a safe depth of bath, reducing risk of drowning as well as being equipped with soft finish of the base. In addition to creating minimal dimensions, the bath itself can be used as a baby changing table. Getting in and out of the bath tub is simple and effortless. There’s no need to climb over edges of the bath. This way, it is beneficial for people with physical disability or those completely immobile.

Uniquely, in this bath we can experience an unmissable feeling of soft, rippling of the bath floor during bathing or when having a massage. This is a new form of relaxation which we can daringly refer to as “kinetic therapy”. The type of technology used forms system of 10 pneumatic pistons (compressed air powering pistons) and includes inclinable segments covered with soft upholstery. This lining creates a pleasant feeling without causing pressure on the body even in the case when the bath is low filled or during the filling or draining of the bath tub. The movable segments are covered by special, highly elastic, hygienic and strong foil (used in the concept of BMW Gina. The geometric shape of the head rest can be partially changed and is also made from movable structures, covered in flexible foil. The type of material`s used are synthetic rock (e.g. ceramics, plastic shroud), glass, elastic foil.

Other systems used are classic hydro/air massaging jets capable of being rotated and powered by electric motor. The connection to mains water supply, water outlet, air and hydro massage jet is through flexible hosing. The bottom of the tub is sealed and the whole base can be raised or lowered over a flat surface of the inner side-panels of the bath. That is how water tightness is ensured.

Everything is controlled electronically with a remote control. As a result, it is possible to select filling/draining of the bath, change water temperature, adjust hydro/air massage settings (duration, intensity, cycle program) and change the shape of the bath floor whit comfortably resting in the bath tub. This is done with the help of sensor button on the display of a remote control. The geometry of the bath can be altered simply by means of accessing touch display screen on the remote control. Naturally, the program remembers previous settings and if the conditions allow, the bath immediately fulfills the command of the user. Simultaneously however, whilst making the change, the height of the water surface, its volume and temperature as well as the total water consumption is electronically monitored.

The filling of the bath is possible through water inlets positioned right beneath the head rest, whilst draining is carried out through the segment located in the middle of the bath tub. If we were to come back to the principle of shaping the bath floor, an alternative method exists, which replaces pneumatic pistons and electrically tilted segments with air pouch system (ballonet). In addition, the foil covering the surface of various segments can also be replaced with a variety of other materials available on the market, that have similar properties.

Designer : Petr Kubik

Designer : Demetrius Tanase

Designer : Johanna Schoemaker

Horizon ploughs straight through the crest instead riding over it which reduces vertical acceleration drastically. Only with the SkySail, Horizon can run at 24 knots max and coupled with the 2 5000hp engines, it will top out at 45 knots.

Designer : Barnaby Heseltine

The minimalist interior features control steering pod, a mimicking game like control where brake and gas paddles embedded close to the steering wheel, offering next generation driving environment. The wheels are fully immersed with rubberized tire with independent spoke arrangement that allows the wheels to absorb the road bumps without having used the suspensions. Moreover, the out of the body wheel base has added few extra with the innovative look that the car already has with its clear body shell and green house like design.

The technology aspect of Pholeum includes a composition of memory plastic body work, allowing the material to be deformed back to its original shape under application of heat from scratches and dents. These plastic can be recycled further and remolded again into the same component if the damage is irreparable. The chassis is made of durable aluminum alloy, making the vehicle strong and lightweight. Comprehensive safety for the driver has been ensured with three external airbags, designed to deploy by sensing a fast automobile within a few meters of its radius through motion sensors. Each wheel contains quad electric motors empowered with efficient next generation hydrogen fuel cell technology.

Designer : Alexei Mikhailov

Designer : FrogDesign

The E-bike has been designed with airless tires, robust tubular construction and shaft drive, ensuring durability, while the luminated front bar and dazzling graphics increase the visibility and safety for the rider. E-bikes have designed to be folded quickly and intuitively by the user and deposit it into the storage modules after arriving to a transit hub. RFID technology has been utilized to charge the users on their Oystercard according to the amount of E-bike rental time. When docked, E-bikes act as hub seating and get charged for the next renter.

Transit hubs optimize the traveler’s transitional experience between renting bike schedule called Bikeshare and boarding on a bus. The hubs provide real time transit schedule by allowing access to the Bikeshare. The Ionic modular design provides the concept with distinctive architectural identifiers all through the cityspace, increasing both the desirability and visibility of city public transit. During the time passengers board on a bus, its ultracapacitors get charged until next stop via a small arm extended from the hub. The busses collect and disperse E-bikes according to demand, effectively diminishing the need of third party distributors.

The electrical modular buses aim to optimize the needs of next generation commuters by providing ultimate convenience for public transit. The specialized interior space addresses the diverse needs of passengers. The compact and ergonomically bended seating arrangement provides a safer environment for seat occupiers and the standing passengers downstairs for short distant travel. On the other hand, long-distance travelers and tourists will be able to enjoy the city from panoramic second floor.

Designer : Gabriel Wartofsky

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Tribons are designed as digital mentors, that support kid’s personal interests and show pathways to boost knowledge and development of skills. Moreover, it offers experiences and information, and make possible the understanding and participation in environments. By using Tribons, an urban child would be introduced to the natural and biological world, and similarly, a rural child can enhance their knowledge about the urban landscape. The accessories developed to comprise an earpiece that is controlled by a spontaneous 3D interface that projects various educational materials and features a safety system that allows parents track their children. Not only that, this gadget includes an additional medical module that offers surveillance of the wearer’s health parameters that will take care in case of chronic sickness and the probability of injuries.

Designer : FrogDesign