Interview with Nico :

What was the inspiration for your concept?
The inspiration was the experimental approach to molecular cooking. Even after several decades of molecular cuisine, it still seems to be an exclusive game for specialists. So it became my main goal to bring some of the fantastic possibilities and ideas of molecular cooking to all ambitious cooks with an easy to use, affordable appliance.

How does your concept fit into this year’s competition theme “Designs for the next 90 years”?
I think the idea of molecular cooking is forward-looking, but the procedures and methods of preparing molecular dishes are still conventional. I would like to change this with my concept. At first, the idea of printing food seems to be something straight out of a science-fiction movie, but on second thought it is not unrealistic at all. I even think that Moléculaire could be the future kitchen tool that opens up possibilities for food-makers interested in molecular cooking.

What are the main consumer benefits of your concept?
Moléculaire is a futuristic kitchen appliance that offers several new possibilities to professional chefs as well as home users. It’s based on a layer-by-layer printing technique that arranges small particles from a set of ingredients. Within minutes, it prints out three-dimensional desserts, complex structures, shapes for molecular dishes, and patterns for decorating a meal. In addition, it’s easy to use. You simply insert a blister pack into the reservoir, place Moléculaire on top of a plate, and press the start button. Users can also create their own recipes with special software and their own ingredients. Ambitious users can download recipes and share them with other users in an online community.

Describe the consumer research behind your concept.
I conducted interviews with chefs and did a lot of research on the Internet. These approaches helped me to understand users’ interests, concerns, wishes, needs and desires. The outcome shaped my initial ideas and helped them grow. The most difficult thing about designing for the future is predicting the possible social and technological developments (their direction and speed). Therefore, it was very useful to read reports like sociological studies about cooking and future scenarios about the development of new technologies.

What kind of materials would you use to build your concept?
For my concept, I would use polycarbonate as the main material. I plan on applying this material in three different variations, each providing the right characteristics for the different parts of my design. Transparent polycarbonate can be used for the window, black tinted for the lid/display, and white for the body. The robotic printer arm and head could be made from aluminum. A blue (O)LED backlight accentuates the processes inside the printer.

Who is your favorite designer?
I don‘t have a favorite designer.

What are your career goals?
After I graduate in 2010, I want to gain more professional experience in a product-design company. In the long term, I want to further develop my conceptual and strategic skills and step into product-related design management.

Designer : Nico Kläber

Designer : Wendy Lui via [Retrevo]

mPower consists of 2 units: Generation and Collection.

mPower Generation is a plant-shaped human-powered unit that produces electricity for immediate and future use. Users access their account using fingerprint recognition, stand on two pads at the base of the unit, and shift their weight from one pad to the other every ten seconds. The system, developed to take up the least amount of a user’s time and effort, can be adapted for the handicapped. A small portion of the electricity generated is used to power the interactive touch-screen at the top of the unit, which offers a broad range of informational services pre-customised by each user. The remaining majority of the electricity generated is sent to the city’s main power plant, to be used or stored. At their convenience, users receive payment for the electricity they generated by accessing their account at mPower Collection.

mPower Collection is a unit that, using the same fingerprint recognition technology, distributes payment and allows for account customisation to users of mPower Generation.

mPower taps into our greatest natural resource: people. Rather than expending energy to create more, mPower harnesses the excess energy we generate by providing a platform for individuals and companies to create electricity, make money, and improve lives. By offering payment to individuals, including those that are homeless, in exchange for a few minutes of minimal movement via a free-to-use system available to everyone, economic and environmental sustainability and empowerment is made available by involving citizens in generating what has become one of our most essential needs: electricity.

mPower units are established by electric companies. Businesses pay electric companies to advertise on mPower Generation touch-screens; these ads are geared to individuals who previously expressed interest in particular products/services as per information entered upon account set-up, thus negating . This negates the need for expensive market research, PR and advertising campaigns. Electric companies pay consumers for generating electricity via mPower; these payments are competitive with fees paid by consumers for power provided by the same electric companies.

The base of the unit consists of two pads, each mounted on a hydraulic cylinder. The cylinders are connected by a micro-hydro turbine. When a person steps onto one of the pads, the resulting pressure forces fluid from one cylinder into the other, causing it to rise. The more a person repeats the movement of shifting his/her weight from one pad to the other, the more electricity is generated. This system can be replaced with piezoelectric pads or other technologies as appropriate.

In addition to the exercise users get while generating electricity, they can also benefit from services available on Generation’s interactive network, including news, community events, traffic information, public transportation information, calendar, time, date, music, weather, radio, product and service information, mobile device charging, internet, widgets, city maps, games, phone calling services.

mPower fits into our daily activities and ways of life without disrupting them. Generation and Collection units can be placed on, in, or near streets and pavements, public transportation waiting areas, airports and other areas where waiting is involved, parks and community areas, schools and universities, libraries, common areas in apartment blocks, and countless other places.

The concept of mPower can be modified to fit into homes, casinos, gyms, phone booths, internet cafes, and wherever generated energy can be used as direct power or in exchange for services and products such as climate control, public lighting, charging mobile phones and other devices. Other generation methods can also be implemented, such as walking, pedaling and running, see-sawing, swinging, and using body weight/heat. The possibilities are endless, sustainable, and empowering.

Designer : Sofian Tallal

Text from David:
Transportation is a key factor in our urban environments and most of our cities are now developed to match the scale and needs of cars, and car users. This reality raises issues regarding sustainability and environment, energy consumption and quality of life.

So, “How can public and personal transports be redefined in a sustainable way, delivering a sense of personal space and independence to its users?” This was the title of my Master of Science in Design and Transport Thesis, concluded in Coventry University, UK, with Distinction, in September 2008.

In other words, the aim of this project was to develop guidelines and a holistic solution for a new system of urban transport, composed of vehicle and infrastructure, in a sustainable way and adaptable to various urban environments.

To develop the project I needed information about: user’s behaviors and explanations for them; main trends; analysis of existing solutions and identification of their problems; definition of applicable technologies in a sustainable manner in a near future. This information was gathered through an online questionnaire, statistical data from several sources, literary research, internet articles, pictures, video and expert interviews and then compiled in my final report.

Preliminary research indicated that several attempts to tackle the issue of mass transportation are being tested and implemented throughout the biggest cities on Earth. Several solutions exist already, but people always seem to give preference to a personal vehicle of some kind to move, commute or make quick trips. Only when there is no other choice, people seem to engage in public transportation. Personal transport is the preferred mode of use and this is a trend that keeps increasing.

The conclusion of the thesis report was composed of guidelines and design specifications that served as basis for the development of a new type of transportation that is truly sustainable and that meets people’s requirements. This generic solution was exemplified through a typical design project that will act as future reference and that goes by the name of “SCARAB”.

PROJECT DESCRIPTION:
VEHICLE:
- The vehicle allows users to have freedom of use much like a motorcycle but with the convenience of having an enclosed private space and luggage compartments.
- The vehicle can be operated in several different positions depending on speed. It is parked vertically for easy ingress and egress and optimization of public space. When in speed position, the vehicle also tilts when curving or changing direction.
- When circulating in dedicated pathways, the SCARAB is controlled by a centralized computer or by a traffic management centre. Outside of the dedicated pathways the SCARAB is controlled by the user just like any other vehicle.

VEHICLE SPECS:
-The vehicle is composed of interchangeable modules that can be customized by the potential buyer/user.
-Powerpack module composed of a permanent battery plus 3 options for the main energy pack (battery, biofuel ICE or a fuel cell).
-4 wheel drive through electric brushless in-wheel motors with directdrive.
-Wheels with regenerative braking through EW Brakes.
-Drive by wire and tactile HUD embedded in the Lexan canopy.
-Structural elements in Carbon-Aramid composite.
-Embedded sensors, Lidar, radar, transponders, GPS. These serve to exchange information with the system, with other drivers and to have precise location data.

INFRASTRUCTURE:
-Communication nodes spread through roadways and traffic management centres in major conurbations.
-Dedicated paths with electromagnetic transponders embedded in the road.
-Parking facilities with solar/wind power generators.
-High speed/long distance travel provided through a railroad interface (not yet developed).

SYSTEM:
-Renting of the vehicle or modules that allows for a private/public/mixed utilization and transport access for people with less financial resources.
-Doesn’t need new infrastructures (uses the existing roads).
-Is backward compatible with current transport systems and uses current day technologies.

Designer : David Miguel Moreira Gonçalves

From the website :

There are several already made Braille products existing in the market. However, other than heavy and large in size, most of them are also highly priced. B&D messenger was designed to solve these problems. We intended to design following aspects: Cost effectiveness and Functionality. General Braille display or TTY system that are available right now are too expensive in price. To reduce its cost, B&D Messenger is built with an open source platform, Arduino and Processing. Currently, in order to keep the price low and affordable, a basic B&D messenger still runs by a connection to a computer, however if the user seeks portability a wireless connection can be made by ordering an optional Bluetooth module that can be easily attached on to the micro controller. In addition, by running under the Internet, no cost will be needed for sending and receiving messages. Small and Light. To accomplish this objective, all of the adopting materials we choose are lightweight. The triangle shape is chosen to be consistent with the other existing devices and the design was limited in accordance with the LCD size. Do-It-Yourself. B&D Messenger is designed to have a less complex construct. The case should be easy to make and ensemble with a recycled hard paper attached inside the kit. All basic electronic parts come with customized and presoldered state.

Designer : Jaeyoon, Kang and Noriaki Okada

The FuChat is made from a biodegradable plastic made from renewable materials like corn starch and sugarcane to reduce its impact on the environment. The FuChat uses a light aluminum compound for the inner framework to increase its durability. The environmentally conscious materials in the phone will appeal to users that are concerned about protecting the environment.

The FuChat uses emotion to increase effective communication. When the FuChat detects a change in the user’s tone of voice or body temperature, it will change the display, text, sound, lights, and color on the phone. Emotional self-awareness can help with business calls, personal calls, general awareness, or people with specific needs like anger management. If the user is busy and does not want to be disturbed, they can set the phone to block all calls and record voicemail messages. The user can enter information about important events into the FuChat and the FuChat will remind the user of these events before they happen. Two-way interaction with the FuChat will closely bond the user with the FuChat.

The FuChat is a tool people can use to convey personal information with others in their home. The back of the FuChat displays the user’s emotional information, the time, weather images, or the “Do not disturb” icon when they are busy. The phone can also hang from a door-handle using the hole on the top of the phone while displaying messages like “Do not disturb” or “Busy studying.” The bottom of the FuChat is weighted so it can stand upright on any flat surface in order to display messages.

The FuChat connects the user to their environment through interaction. The wall-mounted base station of the FuChat displays weather conditions, temperature, time, and caller ID for incoming calls. Weather information is taken from the Internet and is displayed using lively images. The front of FuChat also displays caller ID for incoming calls, has a numbered keypad for dialing, and has buttons to make a call, hang up, and select menu items. Access to regular land-line telephone networks provides additional reliability in the case of Internet outages.

Designer : D-Link

INFO Live’s interface is designed to follow simple human gesture of flipping and finger kicking. Understanding the human gesture and how we behave is the building block to design INFO Live.

INFO Live also learns about saving our earth, it uses less energy during manufacturing. PP as pars of the material for future recycling. Lean production methods that make sure no extra parts are being produce if there is no purchase order.

Source : NextGenPC

This product is to be used by people who have experienced a loss of sight. Siafu allows users to read text by generating full page braille displays.

The onscreen relief feature also allows users to explore the internet and navigate through websites by physically touching, clicking, and dragging the graphic elements, links, and arrows of the web page. Siafu is also capable of converting all onscreen text to braille relief, so that the user can read whatever is on the screen first hand.

Designer : Jonathan Lucas via NextGenDesign

Choose a building and touch a floor and it tells you more details of the building. You can use it when you want to know a car model, an insect name, what kind of food is served at a restaurant and how much, who built a bridge, etc. With detail informations like that, this gadget might only be used by secret service agents. Very futuristic concept.

Designer : Mac Funamizu