Text from Adam :
There are over 400,000 reported drownings and 8 – 10 times as much near drowning experiences worldwide every year. In the UK there are 500 annual drownings. These figures have remained the same for nearly 20 years which tells us that any current equipment and practice is not having the required impact to reduce these numbers.

I have been a beach lifeguard for a number of years and further primary and secondary research has shown that there are a number of key problems that reduce the survival rate of beach users.
These problems are:

• Slow response time
• Surveillance
• Lifeguard safety
• Human limitation of lifeguards

From this research it was decided to look to the future to see what could potentially be new directions for beach safety equipment, this design is therefore based for the year 2020.

The design process was in close collaboration with the BSA (British Surfing Association) headquarters in Newquay (UK). Starting with brainstorming where no idea was a bad idea, followed by concept generation and a wide variety of modeling and system/ scenario testing, the design took innovation from nature, new and existing technologies and user testing.

Explanation of final design

The ‘Mantra’ lives on the sea bed during peak seasons just off the coast of beaches; it uses small hairs on its surface to collect and store energy from tides and waves (called ‘Super Cillia Skin’). It detects distress and drowning using electro sensors coupled with sonar which even today are highly sensitive, for example heartbeats and movements can easily be monitored. When a casualty is detected it swims up to 15mph using SMAs in the wings. The victim is carefully picked up onto an inbuilt stretcher where they are carried on top the water using hydrofoils and impellers. The ‘Mantra’ is always in constant communication with lifeguards and so is met at a specific beach location by lifeguards and ambulances where an EAP is in place and the stretcher is removed without disturbing the patient, who in the worst case scenario may have neck injuries.

Stretchers are replaced and the ‘Mantra’ can assume its position at sea once more. The whole process is estimated to take under 2 minutes.

The final design as can be seen from images, uses biomimicry from a manta ray for many reasons –

• Large flat surface area for all weather stability
• Excellent turning circle and manouverability
• Excellent strength to weight ratio
• Low energy travel
• Considered as a non aggressive creature/ form

Advantages of ‘Mantra’:

• Removal of contact with bodily fluid
• Safety of lifeguards
• Immediate response time
• Completely automated
• Better for spinal and other injuries
• Aesthetics
• Function
• Sustainable

Designer : Adam Scott

Key features of the Cosmic Trac include single sheet hood, safety head lamp, FRP head lights, serviceability, cost affectivity, etc. The head lamp cluster is designed in a housed way, ensuring complete safety for the lights unlike traditional projecting head lamp that always tend to break easily. The exposed engine parts and projected grill gives hi-tech feel which helps for the strength and aggression of the tractor. The fender is covered partly aiming complete driver’s safety. The dark grey and shiny blue color scheme has improved the visual impact of the tractor as a functional futuristic farming vehicle instead of making it a not acceptable tool for the target future farmers.

Designer : Vipin George

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Designer : Robin Wang

The converging sleeper cab sits like a conventional driving cab, but allows for more visibility. The driving cab rotates to allow for a better sleeping position, and reveals a storage compartment for personal storage and a mini dresser. While the cab is in the sleep position the drive pedals are locked out under the cab, due to the rotation, for safety. The seats fold down and together to form a comfortable memory foam mattress.

The cab glass is also ionized and tints or blacks out according to the driver’s needs, the location of the tint will also modify to allow for view on top and not out the sides, or as the driver wishes. The aerodynamic streamline shape was inspired by locomotives and DTM race cars. The fenders sweep up to provide minimal drag, while the hood sleekly rounds to allow air to pass effortlessly, much like an airplane nose. The cab forms a tear drop shape, and covers over the cab-trailer gap, eliminating drag between the cab and trailer. The cab is also bowed at the rear to accommodate the trailer during turns while reducing drag by covering over the sides.

Text from Peter :

Aerodynamic Converting Hybrid Semi. The hybrid truck utilizes its aerodynamics by eliminating the sleeper cab and rounding the body. Long haul truck drivers are the target market. The driving cab rotates to accommodate the driver for sleep and exposes a storage compartment for clothes and possessions. The wheelbase adjusts to provide optimum aerodynamics and ride comfort, while allowing parking to become an easier task. The rear portion of the cab is curved to form the radius of the trailer to allow for turns and additional aerodynamics. The top portion of the cab has an adjustable airfoil to allow air over the top of the trailer, thus reducing even more drag. In the cab the driver experiences a sense of openness and optimal vision, but when he or she needs privacy the Ionized windows will tint or even black out for sleep.

“I set out to create an efficient truck for the vast highway freight market. Even the smallest increase in efficiency creates a huge impact on the overall use of fuel. In the U.S. alone, millions of gallons of diesel are used every year on semi truck transit. Along with its environmental impact the truck must accommodate for its driver at rest and at work. The cab must give the feeling of home while at the same time provide a safe driving environment. Parking the truck without the trailer is also an issue to address. ” states Peter Azzouni.

Designer : Peter Azzouni

[Press Release]

Higgins-Aubé Inc, a young Canadian company, is proud to show early images of its latest creation, the Energya, a three-wheeled vehicle. The Energya™ three-wheeled vehicle, also now know as a motomobile, is designed as a light, high performance vehicle. Similar to a sports car where the driver and the passenger are seated side-by-side, the Energya™ motomobile has a rear engine that drives the single wheel at the back. The vehicle feels, drives and behaves mostly like an open wheels racecar. The vehicle features a distinctive, cutting-edge aggressive design that reflects its level of performance.

Mechanically, the Energya™ motomobile will be powered by a motorcycle engine having a six-speed sequential manual transmission. It will feature an aluminum frame with inboard front suspension using superposed unequal A-arms. The dampers slightly protrude through the front cowling, both as a design statement and for cooling reasons. Particular attention has been given to reduce the weight of each component in order to produce a vehicle that conveys a dynamically thrilling experience. Particular attention has been given to reduce the mass of the non-suspended components and to centralizing most of the mass closer to the vehicle center of gravity for enhancing dynamic performances. The cockpit is typical of a racecar with only the essential instruments for the road. The seats are very supportive, in pure racecar fashion. Innovatively, half-doors are provided to ease access to the cockpit while providing side-impact protection. Convenience has not been neglected with a small storage space under the front cowling.

The advantage of having only three wheels is manifold. First and foremost, a three-wheeled vehicle is considered, in many jurisdictions as a motorcycle. Since the vehicle may do without many of the mandatory systems and components required on an automobile, the motomobile may consequently be made lighter, advantageously influencing its performances. As Higgins-Aubé shares the philosophy of late Colin Chapman, the founder of Lotus Cars™, reducing weight was indeed the cornerstone that led to the choice of this type of vehicle. Furthermore, a three-wheel vehicle having two wheels at the front, contrarily to having a single wheel at the front, is dynamically stable.

Performance targets are set high: achieve 0-100km/h within 4 seconds and lateral acceleration in excess of 1 G. Expect an engine in the neighborhood of 200 hp and an approximate vehicle weight of 350kg. The Energya™ motomobile is aimed at providing exotic car performance at down-to-earth prices.

Styling and design were conducted per state of the art R&D process. “We aimed at solving the main problems related to this compact architecture in sync with engineering. For example, ingress-egress ease and side impact protection were made possible by the use of a half door which also improves general styling by connecting the lower front cowling to the rear fairing with a continuous dynamic line” says Aubé.

Given appropriate financial backing, production units of the Energya™ motomobile could hit the market within 18 months.

As a future step, it is envisioned that the Energya™ motomobile will be offered as an electric vehicle. This will turn the electric-car stereotype on its head, as the same performance objectives will be maintained.

Designer : Higgins-Aubé Inc

Text from Alberto :
Space tourism is already a concept that many companies are taking seriously. Imagine that you have traveled to the moon with four other lucky tourists. You arrive on the moon which is still very empty, and now you and your four travel companions have six hours spare time. Design a moon recreation vehicle with this new form of travel and leisure activity in mind.

FOUR WHEEL STEERING ensures soil preservation by two footprints while providing improved steering.

COORDINATED STEERING reduces damage on the moon surface since turning impact is limited to two footprints by turning front and rear wheels in the opposite direction.

PACKAGE: Passenger Seats are distributed in order to offer a wide central aile. Space is needed to access the seats due to the space suits size. The pilot is centrally located to improve his/ her visibility and vehicle control. Besides self-levelling and transport height according to the ground conditions, SUSPENSION ARMS place the rear of the vehicle near the ground in order to provide access for passengers and pilot.

ENVIRONMENT: The relatively insignificant lunar atmosphere involves:

A. FRAGILITY
- Footprints must be reduced since they will last for thousands of years à Solution
- Dust thrown up from the wheels must be minimized à Solution

B. HOSTILITY
- Extreme temperatures varying from 100ºC to -173ºCà Solution
- Heterogeneous topography à Solution &

CONCEPT: Moon Recreation Vehicle that allows exploration and cooperation with professional astronauts while minimizing influence on the environment. The self-leveling on the move provided by the suspension arms improve the conditions of transport and in addition it is intended to create the sensation of walking on the moon!

MOON RECREATION VEHICLE

The body concept consists of 4 panels (two side panels, the roof and the floor which would also have a function of frame since it would contain the drive unit). These panels would be assembled on the “skeleton” frame (similar to one of the sketches). Suspension arms and wheels would complete the vehicle. So all the parts would fit into the shuttle meanwhile the final assembly could be undertaken at the moon.
The idea behind the glass panels is to provide windows as bigger as possible in order to offer a big scope for the passengers. The driver would also enjoy a big windscreen. I guess an environment like the Moon might intimidate. The idea is to transmit safety by means of:
- rounded surfaces: things like an egg or a dome are structural masterpieces.
- width provided by the suspension arms and wheels around the vehicle body: the moon surface is quite waved and hilly.

The footprints left behind by the Apollo astronauts will last for many thousands of years because there is no wind on the Moon. The Moon has no atmosphere, so there is no weather to erase the footprints. Although gravity is extremely low, we are talking about a big vehicle with five people inside so I think wide wheels would reduce compaction and by no means are useless, since the concept pretends to be as friendly with the environment as possible.

The beginning of the project coincided with the announcement of The Police tour. After all, the lyrics provided me with some messages about the environment and the vehicle.

Designer : Alberto Seco

Press Release :Honda’s Unique and Futuristic DN-01 On Sale From 1 August

Honda’s unique DN-01 motorcycle goes on sale on Friday 1 August from Honda Motorcycle dealers across the UK .

Available in two sleek colours of graphite black and pearl amethyst purple and priced at £9200*, the DN-01 – dream concept turned production reality motorcycle – with fully automatic transmission, is a truly unique machine in the world of motorcycling and defies being categorised.

Honda’s team of engineers set out to create an entirely new category of motorcycle and sought to combine elements of swift superbike performance, relaxed custom cruiser riding comfort, operating ease of a big scooter, attention grabbing and futuristic styling with unparalleled technological advancements.

It’s not a sportsbike, a cruiser, a scooter, a naked bike, adventure bike or a sports-tourer: it’s a new-breed of machine which couples performance, poise, comfort and practicality, all wrapped up in futuristic and radical styling whilst boasting some of the latest Honda technology.

The DN-01 introduces to motorcycling the most advanced fully automatic transmission ever developed for any two-wheeled vehicle – with HFT ‘human-friendly transmission’. Power comes from the proven and punchy Transalp 680cc V-twin, feeding through the HFT system, which offers auto, sports-auto or thumb-operated six-speed manual transmission modes, all providing smooth drive to the rear tyre without the lag of some traditional automatic transmission systems.The low-slung chassis keeps the rider in total comfort and control, while Honda’s superb Combined ABS Braking System keeps braking distances to a minimum in all conditions as well as enhancing safety. And to minimise environmental impact, the oxygen-sensing catalyser system manages the air/fuel mixture to reduce emissions to well below EURO-3 regulations.

Like most of Honda’s larger displacement motorcycles, the new DN-01 also comes fully equipped with the highly capable Honda Ignition Security System (HISS) to protect against ride-away theft.

Whilst the DN-01 looks stunning as standard, it can be further enhanced with a range of Honda Genuine Accessories designed specifically for this model, to include: a custom styled backrest for extra pillion comfort, heated grips with adjustable temperature, Honda Motorcycle Navigation Kit, speakers for a rider’s MP3 player, Bluetooth connection for a mobile phone, a motion and vibration sensitive anti-theft AVERTO alarm system, sturdy U-lock and a rugged, full bike cover.

This new breed of machine made its debut in the UK at the International Scooter and Motorcycle Show at Birmingham ’s NEC in December last year, before its world media launch at Lake Como in April. Having inspired a ‘wow’ factor for many, coupled with limited availability in the UK this year, orders have already been received for the DN-01 as many motorcyclists have stared in awe at the machine’s futuristic looks and the user-friendly nature of the new HFT system.

Honda Motorcycle dealers across the country will be unveiling the DN-01 on Friday 1 August so to see this unique machine in the flesh, or to book at test ride, contact your local dealer.Honda Motorcycle dealers can be located by calling Honda on 0845 200 8000, or by using the ‘Dealer Search’ facility within the Motorcycles area of www.honda.co.uk, where you can also find all the latest news and information about the full Honda motorcycle range, offers, genuine parts, accessories and forthcoming events.

Concept Car Embryo is powered by fuel cells which uses clean fuels like hydrogen. It is completely ecological as it is made of recyclable aluminum and silicon materials used mostly for interior elements. Design wise, it looks like an organism, however safety wise too, it derives the same thought. Soft material is used for exterior while inside it has a protective layer to absorb the impact and keep the passengers safe. The safety system also acts as a communicating system for information like speed, distance etc. and if necessary auto pilot also reacts to avoid possible accidents. With all these safety and design features it surely is a winner in robotic era.

Designer : Goran Marinkovic

Conceived by the leader of our conceptual design team, Mr. Ed Jacobs, the motorcycle is at once primitive, bohemian, and yet highly technical. Renovatio is un-compromised, light weight, possesses enormous torque, is capable of extreme performance, yet has maximum real world streetable active safety. It is graceful in motion, yet potentially brutal. It exudes inner beauty through absolute follow through of truth of concept. Renovatio has great proportions, holistic brand gestalt, is original, impactful, alluring and elegant

Specification :

Dimensions:
Weight: 340lbs.; Wheelbase 60″; Seat Height 30″; 27 degree rake.

Engine:
103 cubic inch Confederate Water cooled 90 degree utilitarian modular platform
150 HP normally aspirated – 190 HP optional supercharger

Transmission:
Confederate design; six speed, close ratio.

Primary:
Internal gear driven

Front End:
Girder-type aircraft aluminum and titanium multi-link with
shock centered on steering axis; Carbon fiber struts.

Swingarm:
Single sided aluminum cast piece.

Suspension:
Rear-Penske coil over shock with remote reservoir multi adjustable; Front-Penske coil in shock, multi adjustable.

Lighting:
Forward LED headlight and blinker system; integrated into girder.

Fuel Cell:
Confederate design, one piece composite fiber cell;
Fuel Capacity 4.5 gallons with integrated air box.

Gauge:
Single integrated tachometer and speedometer.

Wheels:
Blackstone structural carbon fiber.

Identification:
Engine & Neck contain ID numbers.

Preliminary Engine Specifications:
Type: V-twin

Displacement: 1686 cc (103 cu. in.)

V-angle: 90 degrees

Compression ratio: 11.0:1

Valve configuration: Over head valves, 2 per cylinder

Valve lifters: Hydraulic roller

Bore x stroke: 108 x 92mm (4.252 x 3.622 in.)

Fuel system: Sequential fuel injection

Fuel Type: Premium unleaded

Horsepower: 135 hp (SAE Certified)

Torque: 125 lbs-ft (SAE Certified)

Fuel shut off: 7800 rpm

Block: 356-T6 Sand cast aluminum

Cylinder bores: Liner-less Nicom coated parent aluminum

Cylinder head: 356-T6 Sand cast aluminum

Intake manifold: Carbon runner, dual throttle body

Exhaust manifold: 321 Stainless steel headers

Crankshaft: Billet 4340 steel

Camshaft: Billet 8620 VAR steel

Connecting rods: Forged Powder Metal Titanium

Pistons: Forged 4032 Aluminum

Valves: Forged titanium