Designer : Matt Bradbury

For its occupants, the open bodywork of the car represents highly practical solution for urban mobility through a turning required circle of only three meters and a footprint hardly larger than that of a scooter. The wheel provides easy and agile handling that ensures rarely getting stuck in the traffic, while the low center of gravity of this four-wheeler provide excellent stability.

A completely unique feature of this car is its octagonal wheel fairings that entirely cover the tires. This innovative design creates a pleasing and harmonious feeling along with its pearl-white and blue hub caps, where no one can see the wheel rotating any longer. Instead, the movements of the hub caps are only being seen, giving a silent and graceful gliding appearance along the road.

The Twizy Z.E. concept car is powered by a 20hp (15kW) electric motor that can develop 70Nm of torque, combining comfort with reactive performance at any engine speeds. It can accelerate like a 125cc bike and pulls away quickly from standstill. The car features a 75kph of top speed which may not seem a big number, but since it is designed to be used in busy traffic, it still is a fast car while cutting the traffic easily.

Designer : Renault

This bike features a very close to “vintage racer” look with its regenerative breaking and a hub battery since they are similar to a set of drum brakes. The chain is swapped for a carbon shaft, bevel drive and nylon hypoid gears enclosed in right swing arm. Behind the pedal shafts, a small six speed cassette type remains hidden and comes operational if the battery becomes flat any time. Both pedals are lockable at 180 degrees and can be used as foot pegs

Designer : Jean François Vicente

The E-bike has been designed with airless tires, robust tubular construction and shaft drive, ensuring durability, while the luminated front bar and dazzling graphics increase the visibility and safety for the rider. E-bikes have designed to be folded quickly and intuitively by the user and deposit it into the storage modules after arriving to a transit hub. RFID technology has been utilized to charge the users on their Oystercard according to the amount of E-bike rental time. When docked, E-bikes act as hub seating and get charged for the next renter.

Transit hubs optimize the traveler’s transitional experience between renting bike schedule called Bikeshare and boarding on a bus. The hubs provide real time transit schedule by allowing access to the Bikeshare. The Ionic modular design provides the concept with distinctive architectural identifiers all through the cityspace, increasing both the desirability and visibility of city public transit. During the time passengers board on a bus, its ultracapacitors get charged until next stop via a small arm extended from the hub. The busses collect and disperse E-bikes according to demand, effectively diminishing the need of third party distributors.

The electrical modular buses aim to optimize the needs of next generation commuters by providing ultimate convenience for public transit. The specialized interior space addresses the diverse needs of passengers. The compact and ergonomically bended seating arrangement provides a safer environment for seat occupiers and the standing passengers downstairs for short distant travel. On the other hand, long-distance travelers and tourists will be able to enjoy the city from panoramic second floor.

Designer : Gabriel Wartofsky

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Gabriel says :
The Renault Picnic seeks to augment rather than detract from the health of it’s surrounding environment. It is a Zero-emissions vehicle that provides a social function to the parked car within in the urban landscape. When parked, the Picnic transforms into urban furniture, becoming a social space for people to re-acquaint themselves with the surrounding environment. LED-impregnated, glass-coated polycarbonate windows project customized images when the vehicle is parked, transforming the vehicle into a form of public art.

Further considering the environment, the exterior panels are composed of hemp-based composites, and the vehicle is powered by Lithium Ion batteries and two rear-mounted in-wheel hub motors.

In order to reduce cost, complexity and weight, the simple interior is constructed of modular components, with four identical, soy-foam seats and an i-pod doc replacing most of the functions, including sound system and GPS on the dashboard.

Designer : Gabriel Wartofsky

From : JamesDysonAward

Text from designer :

Airliner

This long distance transport vehicle is actuated by superconductive magnets. Superconductors produce frictionless levitation avoiding any mechanic resistance. The vehicle hover above the street. The superconductor is cooled down by electric condensers so the particles of the material nearly stop moving. A rail embedded in the street creates a magnetic field which will be written in the superconductors, positioned at a set distance from the magnetic rail. No mechanic fixation between rail an vehicle will be required. The electromagnetic field generated by the rail also speed up the vehicle. The magnetic field is only generated under the moving vehicle and wont be of any danger for other moving vehicles crossing the rail.

The airliner consists of a drivers cab and several modules which float autonomously, so the shipping volume is expandable. If no cargo is carried the drivers cab ally with the closing module to reduce the volume. At a logistic centre close by a freeway and a city, the cargo gets unload, stored and upload to the cityloader.

Cityloader

This compact transport vehicle is designed for distances up to 400 km and the city traffic. It is powered by electric engines and wheel hubs which can be recharged via plug`n`ride concept at the logistic centre or city stations. A modifiable loading space allows a wide spectrum of use.

Designer : Tobias Förtsch

Designer : Orange

Anton says :
“With increasing demand on an already over-stretched transport infrastructure it makes sense to shift the way that we move, by taking up less space per individual while in transit. The energy required to move the individual is also greatly reduced by reducing the size and weight of the vehicle.

The device also removes direct emissions away from the city and with the addition of environmentally sustainable power generation off-site, the device has the potential to have no net emissions.”

Designer : Anton Grimes