Explanation from Petr:
The exhibit is an active relaxation and rehabilitation bath with special features that permit the changeability of water volume (0-410 L) and provides a pleasant form of relaxation due to its continual and smooth changes to the ergonomical shape of the structure. The bottom contour of the bath adjusts in order to conform to the required position and height of the user. The various geometrical changes to the shape enables the bath to be “shortened” for example, creating a backing for the legs in order to maximize on comfort.

For the purpose of saving on water consumption, one can simply change the depth of the bath so it becomes shallow or select a shape that is most suitable for the user. The changes to the shape of the bath floor can be modified & readjusted anytime. Another wonderful trait of the bath is that it is equally convenient for bathing children, because one can adjust a safe depth of bath, reducing risk of drowning as well as being equipped with soft finish of the base. In addition to creating minimal dimensions, the bath itself can be used as a baby changing table. Getting in and out of the bath tub is simple and effortless. There’s no need to climb over edges of the bath. This way, it is beneficial for people with physical disability or those completely immobile.

Uniquely, in this bath we can experience an unmissable feeling of soft, rippling of the bath floor during bathing or when having a massage. This is a new form of relaxation which we can daringly refer to as “kinetic therapy”. The type of technology used forms system of 10 pneumatic pistons (compressed air powering pistons) and includes inclinable segments covered with soft upholstery. This lining creates a pleasant feeling without causing pressure on the body even in the case when the bath is low filled or during the filling or draining of the bath tub. The movable segments are covered by special, highly elastic, hygienic and strong foil (used in the concept of BMW Gina. The geometric shape of the head rest can be partially changed and is also made from movable structures, covered in flexible foil. The type of material`s used are synthetic rock (e.g. ceramics, plastic shroud), glass, elastic foil.

Other systems used are classic hydro/air massaging jets capable of being rotated and powered by electric motor. The connection to mains water supply, water outlet, air and hydro massage jet is through flexible hosing. The bottom of the tub is sealed and the whole base can be raised or lowered over a flat surface of the inner side-panels of the bath. That is how water tightness is ensured.

Everything is controlled electronically with a remote control. As a result, it is possible to select filling/draining of the bath, change water temperature, adjust hydro/air massage settings (duration, intensity, cycle program) and change the shape of the bath floor whit comfortably resting in the bath tub. This is done with the help of sensor button on the display of a remote control. The geometry of the bath can be altered simply by means of accessing touch display screen on the remote control. Naturally, the program remembers previous settings and if the conditions allow, the bath immediately fulfills the command of the user. Simultaneously however, whilst making the change, the height of the water surface, its volume and temperature as well as the total water consumption is electronically monitored.

The filling of the bath is possible through water inlets positioned right beneath the head rest, whilst draining is carried out through the segment located in the middle of the bath tub. If we were to come back to the principle of shaping the bath floor, an alternative method exists, which replaces pneumatic pistons and electrically tilted segments with air pouch system (ballonet). In addition, the foil covering the surface of various segments can also be replaced with a variety of other materials available on the market, that have similar properties.

Designer : Petr Kubik

Starting from the package I received, a cool sleek package with the heading “Audio Revolution in a Box”, which really enhances the attention. I have opened the package and yeah I got a bit disappointed since almost all the portable speakers come in a pair. Well I must say this feeling got away as soon as I plugged in the little monster with my iPod. But still, I wish I had 2 X-Mini 2nd Generation speakers to make better comparison with X-Mini Max. [Buy it here]

The compact, innovative, capsule shaped design combining with the superb sound clarity it delivers through its large 40mm driver; this is a perfect audio enhancement that can make any sort of music or video player into an individual or group entertainment point. If features high capacity rechargeable battery that can offer around 11 hours of continuous playback which is three times more than its predecessors.

Since I have only one X-Mini 2nd Generation, I couldn’t check but found online in several reviews of this speaker that it can be connected to another and so on, forming a bass-enhanced, self-powered chain of speaker system. This is obviously a cool feature which is quite rare too. In fact to get the experience, I am already searching if any of my friends bought it. It features a built-in volume control too which I personally prefer to keep in max and adjust the volume as much I want from my media player. The LED light shows that it’s turned on.

When it comes about the cables, it is handy in many ways. The main connecting cable has three ports; the mini-USB end goes to the speaker, the 2.0 one goes to the pc and the 3.5mm jack to the media player, whether it’s an iPod, MP3 player or a laptop. Aside from that, the speaker contains a tiny audio connecting cable that can be neatly tucked into the base. Even though, the minimum use of wire has eliminated the hassle a lot, I just wondered a wireless connection using Bluetooth or Wi-Fi or any other means would have made the gadget out of the world.

The size of the speaker is really tiny. I’ve compared with few other portable speakers online, say for an example its cousin X-Mini Max II, and have found it the tiniest among all others of the same range. Moreover, the balance of convenient portability and great sound quality has been done perfectly and accordingly a user would like. The thing I like most of my X-Mini 2nd Generation speaker is its extendable vacuum that imitates the feel of a sub-woofer; you can feel the vibration distinctly when it is playing on your hand, which is able to produce bass and volume over around ten times of its physical size.

Overall, the X-Mini 2nd Generation speaker seems very much stylish with me and everyone I’ve shown it has praised its design and performance. I really loved the speaker and considering the tiny shape and reasonable price, I will surely consider buying one more to get louder sound experience. [Buy it here]

From : X-Mini

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Stone is common element that is found in creek. Stone and water always exist together. Stone is hard and strong; water is soft and transformable. Stone’s strong nature acts as a counterbalance to water softness. They are good partner in the nature world.

Creek is a platform for water stream to move into different ways. Without a large rock or stone blocked in the creek, the water stream move in smooth, regular and strong. When some rocks or stones are in the creek, the water flow is blocked. Then, it moves along the side of rocks. It moves in irregular and weak.

To apply this idea to develop the concept of the tap, the Dish of the tap represents the creek. When stone is pulled up, the water flows straight. When stone is pushed down, the water flows is blocked and spreads along the side of stone.

The Stone is act as “on and off” function. When the Stone turns anti-clockwise, it releases water. The Dish is water temperature control. When it turns anti-clockwise, it changes hot water. When it turns clockwise, it changes cold water.

Designer : Wong Ngo Bun

Randall words about Triclo:

Triclo is a conceptual design of what a tricycle can be in a urban environment. It uses an organic forms and contemporary trend. Balance in visual volume and mass. Using arrays and knots was the basis for the formal development and geometric design.

The concept was: low material vs. high volume

The design is targeted for a younger market but can be used by adults too. The idea was to create a tricycle with a diferent look to capture the attention of people and thus encourage exercise. At the same time the concept of design is important to not use much material in the product and reduce costs.

A tricycle is more than a bicycle but less than a motorbike, but this tricycle has almost a cab, this protects of the sun and rain to the user. Therefore, that is its advantage over a motorcycle that somehow is to approach a car. Maybe this way, providing superior comfort offered by a bicycle or even a conventional tricycle, is a way for people interested in using the product and increasing exercise in the population. The design is targeted for a younger market but can be used by adults too.

The materials were designed to be recycled once they finish their service life. There are variety of colors to suit all tastes.

Dimensions:
1800 x 1500 x 1100 mm.

Maximum capacity:
180 Kg.

Designer : Randall Marin

From Adam :
Urban traffic congestion is an increasing problem which affects countless delivery companies every day. The unique “CarGo” concept addresses this issue with its variable track, wheelbase and load carrying configurations.

Due to its inherent flexibility, the CarGo would be an invaluable addition to any urban delivery company’s fleet by offering:
- Enhanced versatility for use in congested areas due to variable mode options.
- Faster delivery time in heavy traffic as narrow mode gives reduced width and higher maneuverability.
- Easier parking due to compact size.
- Eco-friendly status as a zero-emission electric vehicle.
- Reduced running costs i.e. lower fuel and road tax costs, congestion charge exempt.
- Clip-On composite body panels allow for corporate branding and low repair costs.

Designer : Adam Schacter

E-book readers always keep one thing common that is a very high definition display and the entire surface area is almost occupied. Few e-book readers are available in only black and white colors but there are many supported with full color display capability. The main advantage of e-books is you don’t have to worry about your encyclopedias, technical documentations, catalogues, brochures, magazines and comics to get aged. Moreover, e-books are updating continuously and since most of e-books don’t kill your storage device with a gigantic volume, you can store a previous version documents easily.

Designer : Massimo Marrazzo

Designer : Kioko Muthui

The 2030 Honda’s luxury sports sedan, Zeppelin Concept, was designed with a design direction of “High-tech Dynamic”, inspired from an airship. The feeling of mass has been completed by applying design elements of aerodynamic form from an airship, and on top of that, expressed the distinct powerful image of Honda. Especially the asymmetrical main character line extends from the front hood along the roof line, to all the way back at the rear end. Hexagonal front grille and thick nose volume and the protruding horizontal lamp completes the dynamic face.

The interior was also inspired from the airship, reminiscent of a cozy salon or a first-class seat of an airplane. There is no dashboard in Zeppelin. All the necessary information and other elements needed for driving is displayed on the inter panel of the car, and everything is controlled with only the minimum physical movement due to the use of voice recognition technology. The seat position can be changed freely. That front row seat can rotate 360 degrees and so when the car is not moving, the front row seat and the back row seat can face each other. This makes it possible for a brief meeting, enjoying tea and even working in the car, which could also provide a new experience to the family or a fellow passenger. Due to the display environment on the windshield it was possible to use the angle of windshield and the shape of the A-pillar as a design element of the exterior without any restriction.

Designer : Myung Jin Jung

Designer : Mac Funamizu