Future Technology » Search Results » handle bar

E-Board Tracker Bike : A Small, Funny, and Eco Friendly Motorbike

TheFuture — Wed, 30 Sep 2009 08:43:30 +0000

The Eboard Tracker concept doesn’t focus on just a transport vehicle, rather the designer has envisioned it as an eco-friendly, small and funny motorbike that can run at up to 30 mph and ensures better twisting around the corner of the street with its compact and light design. This bike contains hand throttle instead of traditional electric pedaling and features light, simple and optical flowing frame. A beam girder from section-I and hydro-formed tubes welded together in order to strengthen the steering head. The handlebar is shaped like an ace-bar which is fully adjustable and includes a cycle computer on top with speed, battery status and estimated remaining battery capacity readings.

This bike features a very close to “vintage racer” look with its regenerative breaking and a hub battery since they are similar to a set of drum brakes. The chain is swapped for a carbon shaft, bevel drive and nylon hypoid gears enclosed in right swing arm. Behind the pedal shafts, a small six speed cassette type remains hidden and comes operational if the battery becomes flat any time. Both pedals are lockable at 180 degrees and can be used as foot pegs

Designer : Jean François Vicente

Pulse Urban Bike from Teague

TheFuture — Wed, 02 Sep 2009 11:51:52 +0000

Pulse is an innovative urban bike concept formed to meet all the standard necessities of bike commute. This bike features electric turn signals, located both on the edge of each handle and at the rear indicator light, that can be controlled form the handlebars and a glowing frame that lights up when the rider needs it. The specially designed caged pedals of this bike always remain in a “right way round” manner, which allows the rider not to suffer from having to clip into inconvenient conventional upside down pedals. Pulse, with its compact design and efficient functionalities, would be an ultimate transportation solution that is synchronized with the urban denizen needs.

Designer : Teague via Core77

Xylophone Pitcher from Mac Funamizu

TheFuture — Sat, 29 Aug 2009 03:30:16 +0000

The Pitcher concept water container features a pitcher, which can produce particular pitch of sound when it is hit that enables the users to determine if the pot is empty or not without opening the lid. The handle of this container is made of metal that works as a tuning bar. When there is no water inside the pitcher, it produces the same tone of the tuning bar when the ball hits on both the body and the handle of the pitcher. On the other hand, when the pitcher is full of water, it generates a higher tone than that of the handle. This eco-friendly product would be very much helpful for blind people who can rely on the sound to determine the inside water level.

Designer : Mac Funamizu

LEVEL Concept Cooler by Byron Lee

TheFuture — Wed, 19 Aug 2009 04:12:46 +0000

Level is a concept cooler with the capability of keeping the level of contents inside even when traveling through an uneven surface. The product features self-leveling handlebars that tilt up and down in order to eliminate the required lifting and lowering action when carrying it over a rough surface, such as stairs. The base of the cooler is slightly weighted in comparison with other parts and has active dividers that help placing the content evenly.

Designer : Byron Lee

Electropositive Three Wheeler Concept Vehicle as Urban Transportation

TheFuture — Fri, 24 Jul 2009 08:07:43 +0000

This Electropositive three wheeler concept vehicle was derived from the need of a personal electric vehicle for urban transportation. It features a brushless electric motor in every wheel which acts as a generator also when braking. The body panels of this superb vehicle are made of photovoltaic transparent polycarbonate and carbon fiber “exoskeleton”. Normally, this is a single-seater vehicle but the luggage compartment behind the driver can easily accommodate a passenger if needed. When it’s time to lean, the driver can drag the handlebar towards him, so an electro-hydraulic servo will elevate the center of gravity of the vehicle by working on the piston that attaches the swing arm. Releasing the handlebar will stabilize the vehicle by reducing center of gravity.

Designer : Ionut Predescu

Stylish Zoomla Folding Bike for Quick Around-Town Transportation

TheFuture — Mon, 29 Jun 2009 03:44:36 +0000

Zoomla is a concept bike designed to ensure better alternative for quick, portable and around-town transportation facility. The single-pivot design of this bike has given it quicker, easier and more intuitive fold than any other bike and the unique L-frame eliminates the usual steering tube. The handle is cleverly integrated on the handlebar to allow Zoomla to be rolled when its time to pack it away. The pedal deck uses a compact inner drive system rather than traditional crank and pedals. You can take this bike with you to class or a grocery store since it weights 5 kilos only and the compact shape will let you store it in an average size school locker. Moreover, you can attach a backpack just below the seat to carry your required things in a stylish manner.

Designer : Eric Stoddard

The Barista : Portable Espresso Maker

TheFuture — Fri, 01 May 2009 04:51:10 +0000

The Barista is a handy espresso maker, designed specially for home use to enhance and simplify the user experience both indoor and outdoor. Unlike the usual espresso machines, Barista allows multiple persons to take part in the experience of coffee making and consists of brewing unit, a docking station and five espresso cups. When in docking mode, this machine is attached to the wall outlet and performs like a conventional espresso machine. When in portable mode, the coffee beans remains pre-grounded and the water is kept into a thermos pre-heated in order to enhance the portability of this machine and avoid unnecessary energy consumption.

From Patrik:

The Reason Why
In Sweden, inviting friends over to one’s home for coffee is a very common social gathering. During my research, I found that people who have espresso machines don’t use them during these social coffee gatherings but serve conventional coffee instead because it’s more simple, more time efficient, allows easy refills, and it brews at a touch of a button which doesn’t take the host away from the party.

The making of an espresso beverage is a procedure that is traditionally taken with much pride and joy. Originating in Italy, espresso drinks have grown popularity all over the modern world. I wanted to create an espresso machine that will allow all participants to experience this procedure of creating their own espresso drink, rather than the host being in charge of everyone’s beverages and be left out of the conversations. And the procedure should be simple enough so that all people, regardless of knowledge of espresso making, can use and enjoy.

How It Works

Docking mode
The barista espresso machine consists of a docking station, brewing unit and five espresso cups. One of the main features with the Barista is that it allows multiple users to be in charge of their own espresso brewing, instead of just only one person in conventional espresso makers. To enhance the portability and make it easier to carry, the Barista works in two modes, carry mode (collapsed) and brewing mode (raised). The Barista is connected to the wall outlet when in docking mode, and functions as conventional espresso machine, where beans are grounded for each individual cup in the kitchen.

Portable mode
To make it portable some task are divided up to optimize the power consumption; the coffee beans gets pre-grounded in the kitchen and the water is pre-heated into a thermos at the same time to eliminate unnecessary energy consumption. Collapse the brew unit by pressing down the top part, to raise it, give the handle a push and the machine will raise by itself to brewing mode. The turning top allows the users to access the machine from all directions. Place cups on the tray and rotate the turning top part to move the nozzle over to the other cups.

Designer : Patrik Petersson

Fuel Cell Scooter Concept by Chengli Hung

TheFuture — Thu, 30 Apr 2009 10:50:10 +0000

This scooter bike powered with fuel-cell has the potential to present a better future private transportation vehicle which features better usage, less pollution, more fun and more freedom. This is a small scooter but have a large integrated storage area and an optional storage compartment in the mid-section of the scooter. The flexible steering handlebar allows the scooter to transform into a more potent motorbike for higher speeds which improves the aerodynamics of this vehicle and brings more pleasure of riding. The front wheel is bigger than the rear one and features high performance hydraulic breaks and heavy duty suspensions.

(Click the image for bigger view)

Designer : Chengli Hung

Organic Motion Bike is Based on Z-Frame Concept

TheFuture — Mon, 09 Feb 2009 06:23:23 +0000

One can say without a hitch of a doubt that the bicycle is one of the most environment friendly modes of transportation designed by man. It also is a good medium of exercise so to say as the driving force is one of organic human effort. This new bicycle design called OM-Organik Motion is based on the Z – frame concept, which features integrated systems such as integrated front and rear suspension and an integrated shaft drive. The handlebars and saddle are adjustable and the joystick mounted gear and brake lever system are incorporated along with safety features such as reflectors on the outer wheels and in built-in taillight. Enjoy!

[Press Release]
Organik Motion symbolizes an evolution of one of the world’s most cherished, widely used and ecologically friendly modes of modern, mechanical transportation – the bicycle.

Organik Motion seeks to combine existing basic ergonomics and functionality with state-of-the-art design, materials and technology. This enhances the bike’s overall ergonomics, performance and sustainability, hence, propelling this unique and inspiring mode of transportation further into the 21st century and into our hearts and lifestyles.

Organik Motion Is based on a Z-frame concept. It features a fully integrated braking system, integrated front and rear suspension systems, an integrated shaft drive and a height adjustable saddle and handlebars. This comes along with a joystick-mounted gear and break lever system, which is integrated in the ergonomic handlebars. Additionally, the bicycle features a static inner wheel system with safety features such as integrated reflectors on the rotating outer wheels and a taillight, which is mounted in the bike’s frame. Enjoy the ride…

Designer : Stevie Miles Brewu

The New JBL EON Speakers with Clean Look and More Power

TheFuture — Fri, 31 Oct 2008 06:07:06 +0000

World-recognized strategy, innovation, and design consultancy RKS is proud to announce that JBL has introduced the next generation of its groundbreaking, industry-standard EON® series portable loudspeakers. JBL’s unveiling of the EON500 series powered and lightweight speakers immediately raises the bar in the category of molded powered loudspeakers in all aspects, from industrial design to sonic performance, integrated utility and portability.

“We congratulate JBL on the incredible reception received by the release of the new EON,” said Ravi Sawhney, Founder and CEO of RKS. “We’re thrilled that our collaboration and JBL’s leadership have taken powered PA to a whole new level.”

The resulting design is a striking departure from the original EON. The full, foam-backed, perforated metal grill provides an added measure of protection to internal components, while offering a clean, uncluttered look to the entire line. The speaker’s shape, like the EON’s power, projects from the rear of the speaker where the amp is housed. “The design flows from the back of the speaker in a single, accelerating curve,” explained Lance Hussey, RKS Vice President of Design. The bold port vents, provide a visual accent and evoke fond memories of the original EON.

To minimize abuse to the speakers and users alike, the design team removed all the hard edges and corners. “Not only does that make it very durable, but also very comfortable to move around, there are no corners to bash into your knees and your legs and things or slide in and out of your car,” said Jones. The EON500 series includes three lightweight compact models that each feature an on-board minimixer with loop-thru or mix-out capability. The EON515 puts out a massive 450 watts of power, yet weighs only 33 lbs.

To take full advantage of JBL’s lightweight technology, this flagship EON features three handles. Each full-bar handle, one on the top and one on each side, is placed for optimal ergonomics and balance, and over-molded with a soft comfort-grip. Pole-mounting speakers has never been easier. No more bending over to lift the speaker off the floor. Just grab the top handle, and then easily switch to the side handles as you effortlessly lift the speaker and set it atop the pole.

Designer : RKSDesign