From Eduardo:
Autonomous Living Units is a somewhat satirical project that stands at the intersection of the current housing crisis, the tendency of people in developed countries to live on their own and the trend of turning architecture into a consumer product. The project poses a scenario in which living units (homes) have evolved into the most minimal yet visually alluring objects that can still provide for the basic needs of the 21st century human being.

Because of the morphing of architecture into furniture, the Living Units could be inserted in derelict areas and ruined housing projects. This project was exhibited among others at the d3 Gallery in New York for the “Future Cities: Past, Present” exhibition in April 2009.

Designer : Eduardo McIntosh via [Dezeen]

Text from David:
Transportation is a key factor in our urban environments and most of our cities are now developed to match the scale and needs of cars, and car users. This reality raises issues regarding sustainability and environment, energy consumption and quality of life.

So, “How can public and personal transports be redefined in a sustainable way, delivering a sense of personal space and independence to its users?” This was the title of my Master of Science in Design and Transport Thesis, concluded in Coventry University, UK, with Distinction, in September 2008.

In other words, the aim of this project was to develop guidelines and a holistic solution for a new system of urban transport, composed of vehicle and infrastructure, in a sustainable way and adaptable to various urban environments.

To develop the project I needed information about: user’s behaviors and explanations for them; main trends; analysis of existing solutions and identification of their problems; definition of applicable technologies in a sustainable manner in a near future. This information was gathered through an online questionnaire, statistical data from several sources, literary research, internet articles, pictures, video and expert interviews and then compiled in my final report.

Preliminary research indicated that several attempts to tackle the issue of mass transportation are being tested and implemented throughout the biggest cities on Earth. Several solutions exist already, but people always seem to give preference to a personal vehicle of some kind to move, commute or make quick trips. Only when there is no other choice, people seem to engage in public transportation. Personal transport is the preferred mode of use and this is a trend that keeps increasing.

The conclusion of the thesis report was composed of guidelines and design specifications that served as basis for the development of a new type of transportation that is truly sustainable and that meets people’s requirements. This generic solution was exemplified through a typical design project that will act as future reference and that goes by the name of “SCARAB”.

PROJECT DESCRIPTION:
VEHICLE:
- The vehicle allows users to have freedom of use much like a motorcycle but with the convenience of having an enclosed private space and luggage compartments.
- The vehicle can be operated in several different positions depending on speed. It is parked vertically for easy ingress and egress and optimization of public space. When in speed position, the vehicle also tilts when curving or changing direction.
- When circulating in dedicated pathways, the SCARAB is controlled by a centralized computer or by a traffic management centre. Outside of the dedicated pathways the SCARAB is controlled by the user just like any other vehicle.

VEHICLE SPECS:
-The vehicle is composed of interchangeable modules that can be customized by the potential buyer/user.
-Powerpack module composed of a permanent battery plus 3 options for the main energy pack (battery, biofuel ICE or a fuel cell).
-4 wheel drive through electric brushless in-wheel motors with directdrive.
-Wheels with regenerative braking through EW Brakes.
-Drive by wire and tactile HUD embedded in the Lexan canopy.
-Structural elements in Carbon-Aramid composite.
-Embedded sensors, Lidar, radar, transponders, GPS. These serve to exchange information with the system, with other drivers and to have precise location data.

INFRASTRUCTURE:
-Communication nodes spread through roadways and traffic management centres in major conurbations.
-Dedicated paths with electromagnetic transponders embedded in the road.
-Parking facilities with solar/wind power generators.
-High speed/long distance travel provided through a railroad interface (not yet developed).

SYSTEM:
-Renting of the vehicle or modules that allows for a private/public/mixed utilization and transport access for people with less financial resources.
-Doesn’t need new infrastructures (uses the existing roads).
-Is backward compatible with current transport systems and uses current day technologies.

Designer : David Miguel Moreira Gonçalves

[Press Release]
Honda FC Sport Design Study Suggests Hydrogen Sports Car Future

LOS ANGELES, Nov. 19, 2008 – Honda today revealed the Honda FC Sport design study model, a hydrogen-powered, three-seat sports car concept, at the 2008 Los Angeles Auto Show.

The FC Sport emphasizes the design flexibility and potential of Honda’s V Flow fuel cell technology – already deployed in the Honda FCX Clarity sedan – and reconfigures it into a lightweight sports car design with an ultra-low center of gravity, powerful electric motor performance and zero-emissions. The design study concept is inspired by supercar levels of performance through low weight and a high-performance, electrically driven fuel cell powertrain.

“The Honda FC Sport explores how to satisfy automotive performance enthusiasts in a world beyond petroleum,” said Dan Bonawitz, vice president of American Honda Motor Co., Inc. “People who love sports cars will still have a reason to love in a hydrogen-powered future.”

The high-output Honda fuel cell powertrain and a sleek, aerodynamic body contribute to the vehicle’s performance potential. A modular approach to fuel cell component packaging and the electric drivetrain contribute to the FC Sport’s low center of gravity with the majority of vehicle mass distributed between the axles, creating the balanced weight distribution sought after in sports cars.

The ideal placement of the Honda V-Flow fuel cell stack and related components demonstrates the benefits of a platform-specific, hydrogen-powered fuel cell powertrain. The FC Sport is configured to accommodate a custom-formed high-power fuel cell stack, located between the rear seats, and a battery pack placed low in the middle of the vehicle. The electric motor resides just forward of the rear axle. Two fuel storage tanks, visible from above, are located above the rear axle.

The optimal placement of fuel cell components for performance also allows for a relatively large passenger cabin by conventional supercar standards with enough space for three seating positions. The interior layout focuses primarily on the driver with a racecar-like center driving position. The enclosed canopy opens upward from the rear to allow for entry and exit. Two rear passenger seats flank the driver’s left and right side.

The sleek, low-profile body is designed to convey a high-technology appearance with sculpting that combines angular shapes in the front of the vehicle that taper into geometric, hex forms in the rear. The rear hex forms house cooling radiators for the fuel cell. Formula 1-style barge boards behind the front wheels enhance high speed aerodynamics and convey the vehicle’s racing pedigree. The hydrogen storage tanks, visible from the rear deck, showcase the FC Sports fuel cell technology in much the same way that a “naked bike” motorcycle showcases its engineering technology.

The glacier white body color conveys the FC Sport’s clean environmental aspirations while the dark wheels and deeply tinted glass provide a symbolic contrast befitting of the vehicle’s unique combination of clean power and high performance. Green construction techniques further contribute to a reduced carbon footprint. An organic, bio-structure theme is carried through to the body construction where exterior panels are intended to use plant-derived bio-plastics.

The Advanced Design Studio of Honda R&D Americas, in Pasadena, California, developed the FC Sport design study with the primary objective of using existing fuel cell technology as the basis for an ultimate Honda sports car. Designer Jason Wilbur led the design efforts.

Honda R&D Americas, Inc. began its operations in California in 1975 with local market research activities and has steadily grown its capabilities over the past 33 years to include all aspects of new vehicle design and development. Recent development efforts include trend-setting products such as the Honda Pilot, Ridgeline, Element, Civic Coupe and Civic Si.

In 2008, the company opened two new design centers in Southern California: the Acura Design Studio (Torrance), for the research and design of new Acura products; and the Advanced Design Studio (Pasadena), for the exploration and development of advanced design themes for both Honda and Acura.

The company operates 11 major R&D facilities in North America, including a full vehicle development center in Raymond, Ohio, and three design studios in Southern California. Honda R&D designers, engineers and support personnel are engaged in the development of Honda and Acura automobiles, powersports products, and power equipment for North America and global markets. The company’s main centers of operation include the Los Angeles Center (Torrance, California), responsible for market research, concept development and styling design; the Ohio Center (Raymond, Ohio), responsible for complete product development, testing, and support of North American supplier and manufacturing operations; and a dynamic test facility in Cantil, California.

[Press Release]

Higgins-Aubé Inc, a young Canadian company, is proud to show early images of its latest creation, the Energya, a three-wheeled vehicle. The Energya™ three-wheeled vehicle, also now know as a motomobile, is designed as a light, high performance vehicle. Similar to a sports car where the driver and the passenger are seated side-by-side, the Energya™ motomobile has a rear engine that drives the single wheel at the back. The vehicle feels, drives and behaves mostly like an open wheels racecar. The vehicle features a distinctive, cutting-edge aggressive design that reflects its level of performance.

Mechanically, the Energya™ motomobile will be powered by a motorcycle engine having a six-speed sequential manual transmission. It will feature an aluminum frame with inboard front suspension using superposed unequal A-arms. The dampers slightly protrude through the front cowling, both as a design statement and for cooling reasons. Particular attention has been given to reduce the weight of each component in order to produce a vehicle that conveys a dynamically thrilling experience. Particular attention has been given to reduce the mass of the non-suspended components and to centralizing most of the mass closer to the vehicle center of gravity for enhancing dynamic performances. The cockpit is typical of a racecar with only the essential instruments for the road. The seats are very supportive, in pure racecar fashion. Innovatively, half-doors are provided to ease access to the cockpit while providing side-impact protection. Convenience has not been neglected with a small storage space under the front cowling.

The advantage of having only three wheels is manifold. First and foremost, a three-wheeled vehicle is considered, in many jurisdictions as a motorcycle. Since the vehicle may do without many of the mandatory systems and components required on an automobile, the motomobile may consequently be made lighter, advantageously influencing its performances. As Higgins-Aubé shares the philosophy of late Colin Chapman, the founder of Lotus Cars™, reducing weight was indeed the cornerstone that led to the choice of this type of vehicle. Furthermore, a three-wheel vehicle having two wheels at the front, contrarily to having a single wheel at the front, is dynamically stable.

Performance targets are set high: achieve 0-100km/h within 4 seconds and lateral acceleration in excess of 1 G. Expect an engine in the neighborhood of 200 hp and an approximate vehicle weight of 350kg. The Energya™ motomobile is aimed at providing exotic car performance at down-to-earth prices.

Styling and design were conducted per state of the art R&D process. “We aimed at solving the main problems related to this compact architecture in sync with engineering. For example, ingress-egress ease and side impact protection were made possible by the use of a half door which also improves general styling by connecting the lower front cowling to the rear fairing with a continuous dynamic line” says Aubé.

Given appropriate financial backing, production units of the Energya™ motomobile could hit the market within 18 months.

As a future step, it is envisioned that the Energya™ motomobile will be offered as an electric vehicle. This will turn the electric-car stereotype on its head, as the same performance objectives will be maintained.

Designer : Higgins-Aubé Inc

Designer: Siematic via HomeDosh via TrenDir

Designer : Isamu Sanada via GizmoWatch via Apple-Style

Designer : Vincent Callebaut via TrendHunter

Designer : Lacoste via TrendHunter

From : Valcucine via TrenDir

The Intended user is primarily the single person and or commuter, where time is precious and preparing a meal is more of a chore than an experience to be savoured. Families, with busy schedules could benefit, together with wider ranging demographics.

Taking styling cues from current trends the concept aims to deliver a contemporary take on kitchen appliances and remove those initial semantic values associated with kitchen appliances, to give an air of ?what is that??

Looks like we have more choices for our kitchen in the future, modular kitchen by Fevzi Karaman is still a concept, hopefully this compact cooker by Alex Bradley can be mass produced.

Designer : Alex Bradley via Dezeen