This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Interview with Nico :

What was the inspiration for your concept?
The inspiration was the experimental approach to molecular cooking. Even after several decades of molecular cuisine, it still seems to be an exclusive game for specialists. So it became my main goal to bring some of the fantastic possibilities and ideas of molecular cooking to all ambitious cooks with an easy to use, affordable appliance.

How does your concept fit into this year’s competition theme “Designs for the next 90 years”?
I think the idea of molecular cooking is forward-looking, but the procedures and methods of preparing molecular dishes are still conventional. I would like to change this with my concept. At first, the idea of printing food seems to be something straight out of a science-fiction movie, but on second thought it is not unrealistic at all. I even think that Moléculaire could be the future kitchen tool that opens up possibilities for food-makers interested in molecular cooking.

What are the main consumer benefits of your concept?
Moléculaire is a futuristic kitchen appliance that offers several new possibilities to professional chefs as well as home users. It’s based on a layer-by-layer printing technique that arranges small particles from a set of ingredients. Within minutes, it prints out three-dimensional desserts, complex structures, shapes for molecular dishes, and patterns for decorating a meal. In addition, it’s easy to use. You simply insert a blister pack into the reservoir, place Moléculaire on top of a plate, and press the start button. Users can also create their own recipes with special software and their own ingredients. Ambitious users can download recipes and share them with other users in an online community.

Describe the consumer research behind your concept.
I conducted interviews with chefs and did a lot of research on the Internet. These approaches helped me to understand users’ interests, concerns, wishes, needs and desires. The outcome shaped my initial ideas and helped them grow. The most difficult thing about designing for the future is predicting the possible social and technological developments (their direction and speed). Therefore, it was very useful to read reports like sociological studies about cooking and future scenarios about the development of new technologies.

What kind of materials would you use to build your concept?
For my concept, I would use polycarbonate as the main material. I plan on applying this material in three different variations, each providing the right characteristics for the different parts of my design. Transparent polycarbonate can be used for the window, black tinted for the lid/display, and white for the body. The robotic printer arm and head could be made from aluminum. A blue (O)LED backlight accentuates the processes inside the printer.

Who is your favorite designer?
I don‘t have a favorite designer.

What are your career goals?
After I graduate in 2010, I want to gain more professional experience in a product-design company. In the long term, I want to further develop my conceptual and strategic skills and step into product-related design management.

Designer : Nico Kläber

Text from designer :

Airliner

This long distance transport vehicle is actuated by superconductive magnets. Superconductors produce frictionless levitation avoiding any mechanic resistance. The vehicle hover above the street. The superconductor is cooled down by electric condensers so the particles of the material nearly stop moving. A rail embedded in the street creates a magnetic field which will be written in the superconductors, positioned at a set distance from the magnetic rail. No mechanic fixation between rail an vehicle will be required. The electromagnetic field generated by the rail also speed up the vehicle. The magnetic field is only generated under the moving vehicle and wont be of any danger for other moving vehicles crossing the rail.

The airliner consists of a drivers cab and several modules which float autonomously, so the shipping volume is expandable. If no cargo is carried the drivers cab ally with the closing module to reduce the volume. At a logistic centre close by a freeway and a city, the cargo gets unload, stored and upload to the cityloader.

Cityloader

This compact transport vehicle is designed for distances up to 400 km and the city traffic. It is powered by electric engines and wheel hubs which can be recharged via plug`n`ride concept at the logistic centre or city stations. A modifiable loading space allows a wide spectrum of use.

Designer : Tobias Förtsch

This concept has been driven from the need for zero-pollution, efficient and affordable cars for the future community and enjoying the freedom of a ride. The ATNMBL is designed as a self-driving car with artificial intelligence which arrive to you with just a phone call. The standing-height entrance has an electric sliding glass door and upon entering, you will be asked for your desired destination. The comprehensive and innovative voice recognition system of this vehicle along with a touch screen remote and slide up display, it can offer a wide range of tour planning, detailed performance setting and enjoyable ride sharing.

The overall arrangement of the interior of ATNMBL is very much familiar with conventional living room sitting including side chair, a couch and a low table. Up to seven passengers can sit towards each other and can see outside through large floor-to-ceiling windows on both sides. From outside, this vehicle looks like micro-architecture with a large window, pitched room and asymmetrical shape from every view without any reference to past automobile designs.

A considerable amount of typical car space is blocked with the engine and drive train, while, the mechanical components of ATNMBL are simplified and densely packed, providing more interior space. Each wheel contains electric motors which provide all-wheel drive. The power storing mechanism is located beneath the floor; moreover, alternative solar energy can be obtained from the roof-top solar panels. The front and rear end contains an array of tail lights, headlights and sensors.

Designer : Mike and Maaike via Core77

Designer : Harsha Vardhan via [EcoFriend]

[Press Release]

DRAGONFLY, A METABOLIC FARM FOR URBAN AGRICULTURE

2009 : 800 MILLION OF URBAN FARMERS FOR RESPONSIBLE ECO-CITIES

The world of fast-food and frozen food is over! The urban keen interest of the beginning of our Century turns toward the garden flat bringing back the countryside in our overcrowded cities fighting from now on for a community urban agriculture able to contribute to the durability of the city and to rethink the food production.

On the roofs, terraces, balconies, in the hollow of the non-built public spaces, in the interior yards and the suspended greenhouses, the eco-warrior aspires to escape from its competitive and consumeristic universe imposed by the laws of the market. He desires to cultivate its immediate landscape so as to better take root in the ground by creating his own ecologic and alimentary biodiversity. The consumer becomes from then on producer and the garden inhabitant !

From the Parisian « worker gardens » to the « community gardens » of New York going though Muscovite « vegetable squares », eight hundred million of urban farmers, i.e. more than one human being out of ten, consume nowadays chlorophyllous products from these cosmopolitan kitchen gardens. These new gardens, aware of the emergency to reduce our fuel consumption and the necessity to modify our behaviour facing the climatic changes, decrease thus their environmental impact and build eco-responsible cities on a community way.

2025 : 5.5 BILLION OF CITY SLICKERS FACING THE FOOD CHALLENGE OF THE 21ST CENTURY

According to the PNUD (Programme of the United Nations for the Development), the worldwide urban population will go from 3.1 billion of inhabitants in 2009 up to 5.5 billion of inhabitants within 2025. Looking for a positive energetic assessment, the contemporary city aims within fifteen years at producing cleanly and intensively more energy than it consumes so as to pack this urban exodus! It develops therefore the urban agriculture to become food self-sufficient by recycling at the same time its liquid waste by phyto-purification, its solid waste in fertilizers by composting and by producing energy by biomass, photovoltaic cells and other renewable energies (thermic solar, photovoltaic solar, wind, tide-turbine energies…).

In order to avoid the asphixiation of the planet and the feeding of its 9 billion of inhabitants within 2050, it deals thus with reinventing the traditional energetic pattern between the city and the countryside between western countries, emerging countries and developing countries. This sums up as following: on the one hand import of natural and food resources, and on the other hand export of waste and pollution. The ecologic city aims at reintegrating the farming function on the urban scale by emphasizing the role of the urban agriculture in the use and the reuse of natural resources and biodegradable waste so as to close the loop of ecologic flows.

The urban agriculture can feed the city without any pesticide or chemical fungicide (whose toxicity is proved on the human being : cancer, sterility…), and make it less food dependant of its backcountry or other regions of the world. Organising the distribution of fresh products in short circuits, that means linked directly with the consumer, the urban agriculture complete thus the traditional agriculture. In addition to the nutritive quality of the produced and consumed food, the urban agriculture is also a growth lever of the urban unemployment market and the local economy. It is used directly as a social link in the conciliation of the primary needs of the newcomers with the challenge of their integration in the life of the city, fighting thus against poverty and exclusion. On the sanitary level, this farm approach presents also an interesting potential for the decontamination of polluted grounds and undergrounds as well as for he purification of the polluted atmosphere in CO2.

Due to the fuel crisis and climatical change, the rural agriculture of the western countries must answer to the worldwide food crisis of the developing countries and mainly Africa. Its role is from now on to produce (with an increase estimated of 60% within 2050) all the foodstuffs transportable by boat such as cereals or corn. This is based on the evolution of the science and the most advanced biotechnologies. In addition to this nutritious role, the rural agriculture is newly challenged to recycle its own culture rebus for the green chemistry in order to produce the bio fuel called “second generation fuel” using the energy of non-consumable materials from the plants, that means fibres such as celluloses.

DRAGONFLY, A NOURISHING VERTICALY CULTIVATED CENTRAL PARK

The architecture has to be in the service of this new agriculture and to design this new social desire in this context of ecologic mutation and food autonomy! The Dragonfly project suggests therefore building a prototype of urban farm offering around a mixed programme of housing, offices and laboratories in ecological engineering, farming spaces which are vertically laid out in several floors and partly cultivated by its own inhabitants. This vertical farm sets up all the sustainable applications in organic agriculture based on the intensive production varied according to the rhythm of the seasons. This nourishing agriculture is furthermore in favour of the reuse of biodegradable waste and the keeping of energy and renewable resources for a planning of ecosystemic densification.

Floor by floor, the tower superposes not only stock farming ensuring the production of meat, milk, poultry and eggs but also farming grounds, true biological reactors continuously regenerated with organic humus. It diversifies the cultivated varieties to avoid the washing of stratums of soft substratum. Thus, the cultures succeed one another vertically according to their agronomical ability to provide some elements of the ground between the essences that are sowed and harvested. The tower, true living organism, becomes thus metabolic and self-sufficient in water, energy, and bio-fertilizing. Nothing is lost; everything is recyclable to a continuous auto-feeding!

A BIONIC AND ENERGETICALLY SELF-SUFFICIENT ARCHITECTURE
The architecture of Dragonfly prototype suggests reinventing the vertical building (that outlined the urbanistic booming of New York City since the 19th Century) as structurally and functionally as ecologically and energetically.

To ensure the social diversity and a permanent life cycle (24h/24) in the tower, the mixed programmation is mainly laid out around two poles of housing and work places. Around housings, offices and research laboratories as well as the most private to the most public agricultural and leisure spaces are designed in gardens, kitchen gardens, orchards, meadows, rice fields, farms and suspended fields. The distribution of flows is made around a true safe spine spreading in loop the numerous elevators, the goods elevators and stair wells serving all the levels by separating simultaneously the inputs and the outputs recycled from plants, animals and human beings.

Architecturally, the functional organisation is represented by two oblong towers symetrically arranged in pair around a huge climatic greenhouse that links them and deploys itself between two crystalline wings. These very light wings in glass and steel retake the loads of the building and are directly inspired from the structure of the dragonfly wings coming from the family of “Odonata Anisoptera” whose transparent membrane is very finely nervured. Two inhabited rings buttress around these wings. Their organically chiselled exo-structure accommodates the inter-climatic spaces that receive the agrarian cultures. They buttress.

The whole set forms «double layer» architecture in bee nest mesh that exploits the solar passive energy at its maximum level, by accumulating the warm air in the winter in the thickness of the exo-structure, and by cooling the atmosphere by natural ventilation and by evapo-perpiration of the plants in the summer. Protecting thus the cultures from climatic changes in New York (from -25.5°C in the winter to +41°C in the summer), these plug spaces are useful to reflect on the agriculture not anymore in terms of surface area but really in terms of volume. Actually, whereas grounds nourish orchards, each wall and each ceiling are metamorphosed into three-dimensional kitchen gardens. The interior frontages of the housing and offices throw towards the skyline of New York the cantilever of their hydrophonic balconies with hexagonal section thanks to what it multiplies the culture layers by floors. The vegetation abounds, the earth is swarming of insects and animals are freely brought up in holding tanks by urban consumers with low income. The architecture becomes eatable!

Designer : Vincent Callebaut Architect

Primavera Helmet, designed by Sebastian Hess, is a key product of the latest high quality helmet array for the recent scooter generation. This open face, easy and casual helmet provides 180° visor that meets classic elegance. The clearly defined design has reduced to the essential components only and the style combines the legendary past with latest appearance. Innovation and vision, tradition and future, engineering and design are the main factors of this sustainable product. The main goal of designing this product is to provide excellent safety to the new generation scooter riders with a brilliant outlook that will attract the attention of all range of bikers.

[Press Release]

The Primavera helmet revives a legendary past and represents the birth of the new brand NZI by Hess Design. In its design and performance the helmet plays with citations and references to the exceptional Vespa 50 Special, the style icon of the 70`s. The minimalistic aesthetics of the Primavera refers directly to the mystic Vespa-models of the 70`s. These style icons were the base for the new developed helmet with its innovative features and its easy and safe use. New standards in terms of urbanity and innovation are set by creating a complete Primavera edition containing helmet, gloves and scarves.

Quality is no longer enough. Today a product or a brand is perceived as new only if its functionality and its materials are innovative. Tradition and future, innovation and vision, engineering and design unify and peak in an “honest” and sustainable product without loosing the base of creating innovative, technical and protective apparel. The ambition of the cooperation between NZI and Hess Design is to develop and create new charming products. Essential elements therefor are the intensive investigation of user scenarios and the vision of creating sustainable and innovative products. NZI and Hess Design develop products for seekers of beauty, for people with consciousness looking for high quality products.

Sportiness, dynamic and elegance in all their plainness are the key features of the Primavera. Clearly defined lines that are reduced to the essence underline the character and style consciousness. Their forms and their flow give hints to some new key features. The front of the Primavera with its playful swinging lines and the decorative air-inlets refer to hairstyles and hat fashion of the 60`s. The rear section with its metallic air-outlets rather speaks an automotive language and makes sure the helmet in its appearance is well-balanced. The 180° rotatable visor marks the heart of the helmet. Different shaped and toned visors can be attached to the patented helmet fixation tool-free via magnetic system in just a second.

The fusion of traditional, classical elegance with young, fresh and easy streetwear effects an exciting and charming impression. Deep satisfaction and intimate gratification will be experienced by every Primavera user. Desire of spring, desire of style awakes in all seekers of beauty. Primavera represents the initial of a new lifestyle that can be lived. Primavera, the helmet for the high tech community of tomorrow.

Designer : Sebastian Hess
Photography: Jörg Baumann

Novague words:
Move Your Energy is a power-independent rocking chair with a LED lamp designed especially for reading. The lamp is run by dynamo which changes the mechanic energy obtained by rocking to electric energy. You produce energy needed for lighting on your own.

A simple kinematic arrangement is placed beneath the seat. Mechanism is similar to those used in steam engines and it works together with a sliding lever that runs a flywhell disc while you rock. Produced energy is either deposited in batteries or it supplies the LED lamp.

The principal aims of this concept were to arouse a discussion about „How to achieve the energetic self-sufficiency in the future“ and to make public think about how much energy we could save if we produce energy needed for common day-to-day activities on our own and moreover by amazing and spontaneous way that is friendly to environment.

Designer : Novague via [Dezeen]

Gavin explanations about “Connect” Phone:
Connect is offering simplicity through usability as well as Looks
The majority of the mobile communication market aim their products towards the mid ages. The mature age can’t relate or adjust to such products as easily as other generations because of lack of experience and ability. Physical and User Interaction aspects of a mobile device are the main issues that prevent the mature age using most devices. In the general consumer market, products are over loaded with visual complexity and extra features to standout from competitors. Even to a competent mobile device user this can give the perception of complexity, when all that is desired is simplicity and understanding.

Menu Navigation
Optimus keys house little OLED displays behind them which can be programmed using special software to accommodate multiple functions. Incorporating Optimus keys allows for simplicity within the usability and appearance of the design. This allows what potentially could be a complex menu, to be hidden within the Optimus keys and for the screen to display the current state the user is in. Lesser keys are physically required, making the overall appearance visually simplistic and alluring.

Designer : Gavin Flowers

Designer : Beckmann-N’Thépé Architects via [Bustler]