Randall words about Triclo:

Triclo is a conceptual design of what a tricycle can be in a urban environment. It uses an organic forms and contemporary trend. Balance in visual volume and mass. Using arrays and knots was the basis for the formal development and geometric design.

The concept was: low material vs. high volume

The design is targeted for a younger market but can be used by adults too. The idea was to create a tricycle with a diferent look to capture the attention of people and thus encourage exercise. At the same time the concept of design is important to not use much material in the product and reduce costs.

A tricycle is more than a bicycle but less than a motorbike, but this tricycle has almost a cab, this protects of the sun and rain to the user. Therefore, that is its advantage over a motorcycle that somehow is to approach a car. Maybe this way, providing superior comfort offered by a bicycle or even a conventional tricycle, is a way for people interested in using the product and increasing exercise in the population. The design is targeted for a younger market but can be used by adults too.

The materials were designed to be recycled once they finish their service life. There are variety of colors to suit all tastes.

Dimensions:
1800 x 1500 x 1100 mm.

Maximum capacity:
180 Kg.

Designer : Randall Marin

The interior of VIU was designed aiming the needs of the future users by serving as a living means of transportation. The design of the dashboard stimulates the eye with two lateral LED lights that indicates an efficient driving meter and a tachometer. The 1+1 sitting arrangement of the car offers the exciting movement of a motorcycle together with the safety of a closed car. As the road turns, the car cabin inclinates with the turn and the back seat rotates following the turn to offer maximum driving excitement to the driver.

Up the drivers seat, there is a fan to blow on the drivers back and shoulders to motivate him and to provide an excitingly fresh environment during the hot season when moisture accumulate on the seat, another air fan is there to dissipate the moisture. The steering wheel is actually a drumming pad, which can jam in the speakers when the user drums on the wheel spontaneously. This extremely cost-effective vehicle will cost five cents only with Eneloop batteries for one month, eight hours a day use.

Designer : Quim Vila-Masana Mas

The storage compartment is located in the front and the powerplant is at the rear side of the car. Michelin Tweel concept which actually is airless wheels has been used in the suspension system of this car and is housed within the wheel itself. The structure and the materials of the wheel spokes allows to compress and decompress, offering a collection of motions. The total length of the compact car is 4,260mm, width 1,882mm and height 1153mm.

Designer : Daniel Schumpert

Designer : Brad Mitchell

Cherry will offer easy control using the throttle and the break lever and requires very small place to park. By using lightweight elements such as small battery and carbon-fiber plastic body, this vehicle weights around 40kg or less only and can be carried anywhere easily. The high torque of the electric motor, lightweight design and strong grip via three wheel drive has made it a big performance vehicle. The designer envisioned this vehicle as a transportation solution for every person in future world when space-efficiency would be one of the biggest concerns among mankind.

Designer : Alican Yilmaz

Designer : Kazim Doku

From the designer :
We bring up a new American icon in the subject of Brave and Bold. We were inspired by Harley-Davidson, the American motorcycle symbol and Pontiac-Firebird, a muscle car, therefore we designed the body from which is dynamic and progressive.

The entire body has been designed to have the wheels in front of it like motorcycles, so it is totally different from other cars. The wheel design, which is unique and aggressive, maximizes the design of the body. We call the wheels “the Transforming Multifunctional Wheels”.

A wheel has 24 spokes and each spoke is made up by a special carbon-fiber which has very strong elastic characteristic. The wheel associates a caterpillar tread of tanks. And each spoke can tilt 15 degrees back and forth to be formed to steer the car without any additional steering equipment. The wheels transform and the body tilts in the same direction when the car changes its direction so you can drive safely and dynamically.

Each spoke is constructed independently so that you do not need to replace whole wheel when the tire is flatted but only spokes which are flattened. Therefore, it is an environment-friendly concept. The body can minimize impact of collision to a driver by its body construction of the arms of the wheels. Due to the advantage of the construction, it can run easily off-road, such as the deserts of the United States of America.

Designer : Su-Yang Park & Chang-Hoe Heo

Designer : Mission Motors

Text from David:
Transportation is a key factor in our urban environments and most of our cities are now developed to match the scale and needs of cars, and car users. This reality raises issues regarding sustainability and environment, energy consumption and quality of life.

So, “How can public and personal transports be redefined in a sustainable way, delivering a sense of personal space and independence to its users?” This was the title of my Master of Science in Design and Transport Thesis, concluded in Coventry University, UK, with Distinction, in September 2008.

In other words, the aim of this project was to develop guidelines and a holistic solution for a new system of urban transport, composed of vehicle and infrastructure, in a sustainable way and adaptable to various urban environments.

To develop the project I needed information about: user’s behaviors and explanations for them; main trends; analysis of existing solutions and identification of their problems; definition of applicable technologies in a sustainable manner in a near future. This information was gathered through an online questionnaire, statistical data from several sources, literary research, internet articles, pictures, video and expert interviews and then compiled in my final report.

Preliminary research indicated that several attempts to tackle the issue of mass transportation are being tested and implemented throughout the biggest cities on Earth. Several solutions exist already, but people always seem to give preference to a personal vehicle of some kind to move, commute or make quick trips. Only when there is no other choice, people seem to engage in public transportation. Personal transport is the preferred mode of use and this is a trend that keeps increasing.

The conclusion of the thesis report was composed of guidelines and design specifications that served as basis for the development of a new type of transportation that is truly sustainable and that meets people’s requirements. This generic solution was exemplified through a typical design project that will act as future reference and that goes by the name of “SCARAB”.

PROJECT DESCRIPTION:
VEHICLE:
- The vehicle allows users to have freedom of use much like a motorcycle but with the convenience of having an enclosed private space and luggage compartments.
- The vehicle can be operated in several different positions depending on speed. It is parked vertically for easy ingress and egress and optimization of public space. When in speed position, the vehicle also tilts when curving or changing direction.
- When circulating in dedicated pathways, the SCARAB is controlled by a centralized computer or by a traffic management centre. Outside of the dedicated pathways the SCARAB is controlled by the user just like any other vehicle.

VEHICLE SPECS:
-The vehicle is composed of interchangeable modules that can be customized by the potential buyer/user.
-Powerpack module composed of a permanent battery plus 3 options for the main energy pack (battery, biofuel ICE or a fuel cell).
-4 wheel drive through electric brushless in-wheel motors with directdrive.
-Wheels with regenerative braking through EW Brakes.
-Drive by wire and tactile HUD embedded in the Lexan canopy.
-Structural elements in Carbon-Aramid composite.
-Embedded sensors, Lidar, radar, transponders, GPS. These serve to exchange information with the system, with other drivers and to have precise location data.

INFRASTRUCTURE:
-Communication nodes spread through roadways and traffic management centres in major conurbations.
-Dedicated paths with electromagnetic transponders embedded in the road.
-Parking facilities with solar/wind power generators.
-High speed/long distance travel provided through a railroad interface (not yet developed).

SYSTEM:
-Renting of the vehicle or modules that allows for a private/public/mixed utilization and transport access for people with less financial resources.
-Doesn’t need new infrastructures (uses the existing roads).
-Is backward compatible with current transport systems and uses current day technologies.

Designer : David Miguel Moreira Gonçalves

[Press Release]
Honda FC Sport Design Study Suggests Hydrogen Sports Car Future

LOS ANGELES, Nov. 19, 2008 – Honda today revealed the Honda FC Sport design study model, a hydrogen-powered, three-seat sports car concept, at the 2008 Los Angeles Auto Show.

The FC Sport emphasizes the design flexibility and potential of Honda’s V Flow fuel cell technology – already deployed in the Honda FCX Clarity sedan – and reconfigures it into a lightweight sports car design with an ultra-low center of gravity, powerful electric motor performance and zero-emissions. The design study concept is inspired by supercar levels of performance through low weight and a high-performance, electrically driven fuel cell powertrain.

“The Honda FC Sport explores how to satisfy automotive performance enthusiasts in a world beyond petroleum,” said Dan Bonawitz, vice president of American Honda Motor Co., Inc. “People who love sports cars will still have a reason to love in a hydrogen-powered future.”

The high-output Honda fuel cell powertrain and a sleek, aerodynamic body contribute to the vehicle’s performance potential. A modular approach to fuel cell component packaging and the electric drivetrain contribute to the FC Sport’s low center of gravity with the majority of vehicle mass distributed between the axles, creating the balanced weight distribution sought after in sports cars.

The ideal placement of the Honda V-Flow fuel cell stack and related components demonstrates the benefits of a platform-specific, hydrogen-powered fuel cell powertrain. The FC Sport is configured to accommodate a custom-formed high-power fuel cell stack, located between the rear seats, and a battery pack placed low in the middle of the vehicle. The electric motor resides just forward of the rear axle. Two fuel storage tanks, visible from above, are located above the rear axle.

The optimal placement of fuel cell components for performance also allows for a relatively large passenger cabin by conventional supercar standards with enough space for three seating positions. The interior layout focuses primarily on the driver with a racecar-like center driving position. The enclosed canopy opens upward from the rear to allow for entry and exit. Two rear passenger seats flank the driver’s left and right side.

The sleek, low-profile body is designed to convey a high-technology appearance with sculpting that combines angular shapes in the front of the vehicle that taper into geometric, hex forms in the rear. The rear hex forms house cooling radiators for the fuel cell. Formula 1-style barge boards behind the front wheels enhance high speed aerodynamics and convey the vehicle’s racing pedigree. The hydrogen storage tanks, visible from the rear deck, showcase the FC Sports fuel cell technology in much the same way that a “naked bike” motorcycle showcases its engineering technology.

The glacier white body color conveys the FC Sport’s clean environmental aspirations while the dark wheels and deeply tinted glass provide a symbolic contrast befitting of the vehicle’s unique combination of clean power and high performance. Green construction techniques further contribute to a reduced carbon footprint. An organic, bio-structure theme is carried through to the body construction where exterior panels are intended to use plant-derived bio-plastics.

The Advanced Design Studio of Honda R&D Americas, in Pasadena, California, developed the FC Sport design study with the primary objective of using existing fuel cell technology as the basis for an ultimate Honda sports car. Designer Jason Wilbur led the design efforts.

Honda R&D Americas, Inc. began its operations in California in 1975 with local market research activities and has steadily grown its capabilities over the past 33 years to include all aspects of new vehicle design and development. Recent development efforts include trend-setting products such as the Honda Pilot, Ridgeline, Element, Civic Coupe and Civic Si.

In 2008, the company opened two new design centers in Southern California: the Acura Design Studio (Torrance), for the research and design of new Acura products; and the Advanced Design Studio (Pasadena), for the exploration and development of advanced design themes for both Honda and Acura.

The company operates 11 major R&D facilities in North America, including a full vehicle development center in Raymond, Ohio, and three design studios in Southern California. Honda R&D designers, engineers and support personnel are engaged in the development of Honda and Acura automobiles, powersports products, and power equipment for North America and global markets. The company’s main centers of operation include the Los Angeles Center (Torrance, California), responsible for market research, concept development and styling design; the Ohio Center (Raymond, Ohio), responsible for complete product development, testing, and support of North American supplier and manufacturing operations; and a dynamic test facility in Cantil, California.