Designer : Rochus Jacob

Designer : Dulyawat Wongnawa

[Press Release]

DRAGONFLY, A METABOLIC FARM FOR URBAN AGRICULTURE

2009 : 800 MILLION OF URBAN FARMERS FOR RESPONSIBLE ECO-CITIES

The world of fast-food and frozen food is over! The urban keen interest of the beginning of our Century turns toward the garden flat bringing back the countryside in our overcrowded cities fighting from now on for a community urban agriculture able to contribute to the durability of the city and to rethink the food production.

On the roofs, terraces, balconies, in the hollow of the non-built public spaces, in the interior yards and the suspended greenhouses, the eco-warrior aspires to escape from its competitive and consumeristic universe imposed by the laws of the market. He desires to cultivate its immediate landscape so as to better take root in the ground by creating his own ecologic and alimentary biodiversity. The consumer becomes from then on producer and the garden inhabitant !

From the Parisian « worker gardens » to the « community gardens » of New York going though Muscovite « vegetable squares », eight hundred million of urban farmers, i.e. more than one human being out of ten, consume nowadays chlorophyllous products from these cosmopolitan kitchen gardens. These new gardens, aware of the emergency to reduce our fuel consumption and the necessity to modify our behaviour facing the climatic changes, decrease thus their environmental impact and build eco-responsible cities on a community way.

2025 : 5.5 BILLION OF CITY SLICKERS FACING THE FOOD CHALLENGE OF THE 21ST CENTURY

According to the PNUD (Programme of the United Nations for the Development), the worldwide urban population will go from 3.1 billion of inhabitants in 2009 up to 5.5 billion of inhabitants within 2025. Looking for a positive energetic assessment, the contemporary city aims within fifteen years at producing cleanly and intensively more energy than it consumes so as to pack this urban exodus! It develops therefore the urban agriculture to become food self-sufficient by recycling at the same time its liquid waste by phyto-purification, its solid waste in fertilizers by composting and by producing energy by biomass, photovoltaic cells and other renewable energies (thermic solar, photovoltaic solar, wind, tide-turbine energies…).

In order to avoid the asphixiation of the planet and the feeding of its 9 billion of inhabitants within 2050, it deals thus with reinventing the traditional energetic pattern between the city and the countryside between western countries, emerging countries and developing countries. This sums up as following: on the one hand import of natural and food resources, and on the other hand export of waste and pollution. The ecologic city aims at reintegrating the farming function on the urban scale by emphasizing the role of the urban agriculture in the use and the reuse of natural resources and biodegradable waste so as to close the loop of ecologic flows.

The urban agriculture can feed the city without any pesticide or chemical fungicide (whose toxicity is proved on the human being : cancer, sterility…), and make it less food dependant of its backcountry or other regions of the world. Organising the distribution of fresh products in short circuits, that means linked directly with the consumer, the urban agriculture complete thus the traditional agriculture. In addition to the nutritive quality of the produced and consumed food, the urban agriculture is also a growth lever of the urban unemployment market and the local economy. It is used directly as a social link in the conciliation of the primary needs of the newcomers with the challenge of their integration in the life of the city, fighting thus against poverty and exclusion. On the sanitary level, this farm approach presents also an interesting potential for the decontamination of polluted grounds and undergrounds as well as for he purification of the polluted atmosphere in CO2.

Due to the fuel crisis and climatical change, the rural agriculture of the western countries must answer to the worldwide food crisis of the developing countries and mainly Africa. Its role is from now on to produce (with an increase estimated of 60% within 2050) all the foodstuffs transportable by boat such as cereals or corn. This is based on the evolution of the science and the most advanced biotechnologies. In addition to this nutritious role, the rural agriculture is newly challenged to recycle its own culture rebus for the green chemistry in order to produce the bio fuel called “second generation fuel” using the energy of non-consumable materials from the plants, that means fibres such as celluloses.

DRAGONFLY, A NOURISHING VERTICALY CULTIVATED CENTRAL PARK

The architecture has to be in the service of this new agriculture and to design this new social desire in this context of ecologic mutation and food autonomy! The Dragonfly project suggests therefore building a prototype of urban farm offering around a mixed programme of housing, offices and laboratories in ecological engineering, farming spaces which are vertically laid out in several floors and partly cultivated by its own inhabitants. This vertical farm sets up all the sustainable applications in organic agriculture based on the intensive production varied according to the rhythm of the seasons. This nourishing agriculture is furthermore in favour of the reuse of biodegradable waste and the keeping of energy and renewable resources for a planning of ecosystemic densification.

Floor by floor, the tower superposes not only stock farming ensuring the production of meat, milk, poultry and eggs but also farming grounds, true biological reactors continuously regenerated with organic humus. It diversifies the cultivated varieties to avoid the washing of stratums of soft substratum. Thus, the cultures succeed one another vertically according to their agronomical ability to provide some elements of the ground between the essences that are sowed and harvested. The tower, true living organism, becomes thus metabolic and self-sufficient in water, energy, and bio-fertilizing. Nothing is lost; everything is recyclable to a continuous auto-feeding!

A BIONIC AND ENERGETICALLY SELF-SUFFICIENT ARCHITECTURE
The architecture of Dragonfly prototype suggests reinventing the vertical building (that outlined the urbanistic booming of New York City since the 19th Century) as structurally and functionally as ecologically and energetically.

To ensure the social diversity and a permanent life cycle (24h/24) in the tower, the mixed programmation is mainly laid out around two poles of housing and work places. Around housings, offices and research laboratories as well as the most private to the most public agricultural and leisure spaces are designed in gardens, kitchen gardens, orchards, meadows, rice fields, farms and suspended fields. The distribution of flows is made around a true safe spine spreading in loop the numerous elevators, the goods elevators and stair wells serving all the levels by separating simultaneously the inputs and the outputs recycled from plants, animals and human beings.

Architecturally, the functional organisation is represented by two oblong towers symetrically arranged in pair around a huge climatic greenhouse that links them and deploys itself between two crystalline wings. These very light wings in glass and steel retake the loads of the building and are directly inspired from the structure of the dragonfly wings coming from the family of “Odonata Anisoptera” whose transparent membrane is very finely nervured. Two inhabited rings buttress around these wings. Their organically chiselled exo-structure accommodates the inter-climatic spaces that receive the agrarian cultures. They buttress.

The whole set forms «double layer» architecture in bee nest mesh that exploits the solar passive energy at its maximum level, by accumulating the warm air in the winter in the thickness of the exo-structure, and by cooling the atmosphere by natural ventilation and by evapo-perpiration of the plants in the summer. Protecting thus the cultures from climatic changes in New York (from -25.5°C in the winter to +41°C in the summer), these plug spaces are useful to reflect on the agriculture not anymore in terms of surface area but really in terms of volume. Actually, whereas grounds nourish orchards, each wall and each ceiling are metamorphosed into three-dimensional kitchen gardens. The interior frontages of the housing and offices throw towards the skyline of New York the cantilever of their hydrophonic balconies with hexagonal section thanks to what it multiplies the culture layers by floors. The vegetation abounds, the earth is swarming of insects and animals are freely brought up in holding tanks by urban consumers with low income. The architecture becomes eatable!

Designer : Vincent Callebaut Architect

Amar description :
Rubicona is designed as a multi-function kitchen which is combined from different components that are independent from each other and that can be used depending on the user’s request. Starting point for the kitchen was Rubicon square, which has evaluated and taken its current shape. Characteristics of Rubicona is that it is combined from different components (flat cook, sink for vegetables and fruits etc.) and each is combined from two levels of storages with 6 elements in each level, which enables to keep different kinds of fresh food (fruits and vegetables), so they are not mixed, and each keeps its own aroma and freshness. Each storage element has an opening from front side in the shape of a cut which works as a hook to open and also has a function of air circulation which enables food to stay fresh. Each level can be rotated for 360 degrees and that enables taking food without moving, no matter from which level! With the aid of rotating elements, cooking with more than one person at the same time is possible, whereby cooking becomes more interesting and more exciting.

Designer : Amar Cudic

Jongho Nho has designed a vacuum food saver with new, elegant and smaller size called Rosaline, an improvement to classic vacuum food saver. This product has won RedDot Award 2008.

Designer : Jongho Nho

Press Release :
The MINI brand is continuing its overwhelming story of success – now taking a new approach with the MINI Crossover Concept.

This Design Study offers a fascinating outlook at a new facet of the brand powerfully expressed by a truly innovative body concept – the fourth body variant, to be precise, following the classic two-door, the MINI Convertible, and the MINI Clubman.

The MINI Crossover Concept is a new model variant for the first time measuring more than four metres in length, with four drive wheels, four doors and four single seats. These features alone place the new car right in the line of vision of new target groups seeking to combine the individual style of the brand with enhanced versatility within the interior and innovative functionality throughout.

A universal, multifunction fastening rail, the MINI Center Rail, extending between the seats on the centre console of the MINI Crossover Concept, offers not only offers unconventional storage options, but also provides a consistent link between the front row of seats and the rear.

A further highlight within the MINI interior is the innovative central instrument in three-dimensional finish, the MINI Centre Globe.

This combined control and display unit formed as a globe featured for the first time in an automobile worldwide sets new standards for the integrated control of entertainment, communication, navigation, and vehicle functions.

The MINI Crossover reflects not only the potential of the MINI model family in growing further and further to new dimensions, but also the innovative power of MINI’s designers. In this case, the outlook at an additional MINI concept is enriched by a wide range of visions expressing a unique driving experience and way of life only a MINI is able to evoke.

All innovations presented in the MINI Crossover Concept are conceived to expand that characteristic MINI feeling by yet another new dimension.

The innovative character of the new car comprises its body design as well as the drivetrain, the interior and the control concept. Indeed, offering options and versatility of this kind, the MINI Crossover Concept opens up new dimensions in mobility also beyond urban life.

All-wheel drive – the foundation for a new MINI feeling. A new MINI offers more – and does so in unique style every time.

The MINI Crossover Concept clearly expresses this principle, its all-wheel drive serving to give the new model an even wider range of practical use in new areas and a new experience on routes already driven. But in doing so the MINI Crossover Concept is not limited to the usual status of a conventional all-wheeler. Rather, to offer its additional mobility potential even more consistently, the Concept Car comes with numerous design features making it an all-round talent for a unique experience in everyday life, for enjoying leisure time to the utmost, for adventure travels of all kinds and for travel planning. Hence, the MINI Crossover Concept looks at new objectives and, at the same time, new target groups.

Four metres in length – more calibre, more options.

As a consistent enhancement of the MINI model family, the MINI Crossover Concept offers new calibre and new format in every respect. This is the first MINI to measure more than four metres in length. And measuring 1,830 millimetres/72.0″ in width as well as 1,598 millimetres/62.9″ in height, the MINI Crossover Concept goes beyond the existing production models from MINI also in this respect. Wheelbase, finally, is 2,606 millimetres/102.6″, again ensuring an even more powerful stance on the road.

These exterior dimensions of the Concept Car are a clear symbol of the quest for additional options in driving the car and in the new, enhanced driving experience.

The MINI Crossover Concept offers extra space and mobility at the rear as well as a capacity to transport never seen before in a MINI. Added to all this, there is enhanced flexibility in splitting up the interior space, catering for all individual wishes and demands.

Combining its unique design with outstanding agility by no means restricted to the beaten track alone, the MINI Crossover Concept holds a unique position within the MINI segment. At the same time it clearly stands out as a member of the MINI model family through the appropriate re-interpretation of design elements typical of the brand. The MINI Crossover Concept thus symbolises the breakthrough into a new category of vehicles, broadening the appeal of the brand to an even larger target group.

Four doors – new diversity through asymmetric arrangement.

With two doors on each side of the car, the MINI Crossover Concept offers particularly comfortable access to the rear. Here again, therefore, the new model enhances the options and qualities offered so far by the existing body concepts of the MINI.

But even this is not all: The MINI Crossover Concept is not a four-door in the classic sense, as is clearly expressed by the asymmetric arrangement of the doors in the Design Study. A conventional arrangement of doors is to be found only on the front passenger’s side, while on the driver’s side the MINI Crossover Concept comes with a conventional door for the first row of seats plus a lift/sliding door moving along the outside for convenient access to the rear and for loading the car from the side. And by dropping the B-pillar on the driver’s side, the MINI Crossover Concept exhausts the potential of this generous opening to an even higher degree. Frameless side windows, finally, are yet another feature of this truly exceptional four-door.

The rear door swivelling to one side, together with its frameless and retractable rear window, likewise offers an even higher standard of practical use and most convenient loading conditions. Thanks to the large opening and the low loading sill, sports equipment and other, even bulkier objects can be loaded conveniently into the luggage space offering even larger capacity when required by lowering the individually folding rear seats completely into the floor of the car with the help of a parallelogram kinematic mechanism.

Storage capacities may then be increased even further by a transport case fitted outside on the rear door. And last but certainly not least, the roof rail system available on the MINI Crossover Concept is simply ideal for fitting ski, snowboard and bicycle carriers as well as transport boxes of all sizes.

The roof structure of the MINI Crossover Concept offers further options in enhancing everyday driving qualities and leisure-time enjoyment. As a folding roof cover extending throughout the entire length of the roof, the roof structure may be opened both from the front and from the rear, letting either fresh air or warm sunshine into the car – or both, depending on the driver’s and passengers’ wishes.

The opening at the rear also serves to accommodate extremely long objects transported in the car, ranging from a surfboard all the way to cross-country skis. So even in this case, transporting anything the driver wishes to take along is easy and convenient.

Four single seats – for maximum comfort inside the MINI.

The MINI Crossover Concept stands out not only as an unconventional, but rather as a truly exceptional four-seater. The single seats at the rear, to mention perhaps the most significant highlight, come in the same contours as the driver’s and front passenger’s seats and are adjustable by 13 centimetres or 5.1″ fore-and-aft. So depending on individual requirements, the rear seats offer either lounge-like legroom or additional storage capacity in the rear compartment.

The MINI Center Globe – a new vision of the central instrument of the future.

Featuring their round Central Display right in the middle of the dashboard, the current MINIs already boast an interior design feature quite unique and unmistakable in its look. Indeed, this multi-function display serves to conveniently control all major entertainment, telecommunication and navigation functions, providing the speedometer function around its outer circumference.

Now the MINI Crossover Concept introduces the consistent enhancement of this display and control concept: the MINI Center Globe. For the first time, therefore, the central display and control unit is designed in this Concept Study as a globe. This three-dimensional layout allows even more consistent integration of functions and the appropriate presentation of information and entertainment options. In addition to the vertical and horizontal display features currently available, the new instrument adds a further, three-dimensional element with displays stratified on various levels and highlighted to a greater or lesser degree, depending on the driver’s and front passenger’s requirements. The current speed of the car, finally, is shown as before in typical MINI style on the display round the edge.

To clearly, flexibly and legibly present all information at all times, the MINI Center Globe comes with ultra-modern laser projection technology. With its unique optical features, the laser projector allows simultaneous presentation of pictures on various levels, with a varying focus and in powerful colours.

Benefiting from this technology never seen before in an automobile worldwide, the MINI Crossover Concept is also able to optically separate the MINI Centre Globe into two hemispheres. These adjustable, moving hemispheres then enable the driver and front passenger to present and view different pictures recognisable only from their individual perspective. In other words, the front passenger may for example surf the net while the driver maintains his free view of all displays and instruments.

To provide this special effect, the hemisphere facing the front passenger closes down from the other side and acts as a projection surface presenting the pictures required.

The MINI Centere Globe presented in this Design Study already shows today what options are conceivable in terms of navigation, communication and entertainment in the car of the future, using innovative technologies of this outstanding calibre.

The driver and/or front passenger operate the MINI Centre Globe by a touch-sensitive surface, a trackball on the steering wheel, buttons and slide controls in the lower section of the MINI Centre Globe, and a keyboard on the front passenger’s side extending at the touch of a button from the dashboard.

Such versatile and flexible use of the MINI Center Globe gives this new control unit the character of an innovative travel companion adjusting at all times to the individual wishes of the driver and front passenger and helping them enjoy mobility in a new dimension wherever they go.

The MINI Centre Globe is additionally linked to the starter system for the engine. Instead of a conventional key, the driver uses a start/stop unit referred to as the Keyball.

To start the car, all the driver has to do is insert the Keyball on the MINI Crossover into the appropriate opening in the upper edge of the MINI Centre Globe. The Keyball then rolling towards the driver along the middle of the MINI Centre Globe. In this position the driver is able to press the Keyball in order to start the engine. Pressing the Keyball again, in turn, he switches off the engine and the Keyball rolls down into its housing bay from where the driver can conveniently remove the ball.

The MINI Centre Rail – a perfect connection bringing the MINI team front and rear together.

Instead of a conventional centre consol, the MINI Crossover Concept comes with a fastening rail referred to as the MINI Centre Rail and extending from the dashboard all the way to the tailgate of the car. This is indeed the connecting unit between the front and the rear seats.

Holders for entertainment and telecommunication devices, cupholders, storage units and boxes may be conveniently attached to this rail and subsequently pushed forward or backward along the entire length of the car.

A special fastening system developed specifically for MINI serves to attach individual items to the Centre Rail, for example an external music player and other devices, storage boxes and holders for sunglasses, gloves, tickets for parking, coins, writing utensils or a travel guide, as well as all other kinds of holders and supports.

An armrest with an integrated storage box, to mention another example, may be attached both at the front and at the rear.

The Centre Rail also facilitates the common use of storage boxes and devices and makes it much easier to pass on food and drinks to the rear-seat passengers while driving.

In the MINI Crossover Concept this pleasure of enjoying all the benefits of motoring together is symbolised by a special collection of dishes and cups made of unique porcelain created specifically for the new Concept Car.

Four sophisticated materials for a truly exclusive ambience.

Such use of top-quality porcelain highlights the exclusive lifestyle character borne out in the MINI Crossover Concept also in conjunction with three further, particularly exclusive materials in the interior: Around the instrument panel genuine wood trim extends across the entire width of the car. The armrests on the doors and the inlays in the footwells, in turn, are made of massive lime wood. Inlays made of specially hardened, lagoon-blue glass, in turn, highlight the door linings as well as the surrounds on the air vents.

Like the door closing handles on the front passenger’s side, the MINI Centre Rail is made of massive, matt-polished aluminium. Looking at the appropriate colours for the interior, in turn, the designers opted for natural, authentic shades, the Dark Green leather on the driver’s seat standing out clearly from the Coffee Brown leather on the other seats. The remaining cloth surfaces are finished in Light Grey and Light Brown, with a soft rubber cover adorned by wood inlays in the footwells.

Designer : Roland Cernat

Designer : Chiara Ripalti and Ilaria Scipione

Thermoelectric Peltier elements replace the traditional ?freezer batteries? which defrost after a while. Therefore, the food inside stays fresh and cool for a longer time. They are supplied by a storage cell which can be reloaded inside the car or at home. Inside the pockets are compact tablets with all the equipment needed for a picnic. A foldable cup, a knife, spoon and fork are moulded into the tablet surface. All these parts are developed to use a minimal amount of space with a maximum of function.

Designer : Sebastian Bertram