For its occupants, the open bodywork of the car represents highly practical solution for urban mobility through a turning required circle of only three meters and a footprint hardly larger than that of a scooter. The wheel provides easy and agile handling that ensures rarely getting stuck in the traffic, while the low center of gravity of this four-wheeler provide excellent stability.

A completely unique feature of this car is its octagonal wheel fairings that entirely cover the tires. This innovative design creates a pleasing and harmonious feeling along with its pearl-white and blue hub caps, where no one can see the wheel rotating any longer. Instead, the movements of the hub caps are only being seen, giving a silent and graceful gliding appearance along the road.

The Twizy Z.E. concept car is powered by a 20hp (15kW) electric motor that can develop 70Nm of torque, combining comfort with reactive performance at any engine speeds. It can accelerate like a 125cc bike and pulls away quickly from standstill. The car features a 75kph of top speed which may not seem a big number, but since it is designed to be used in busy traffic, it still is a fast car while cutting the traffic easily.

Designer : Renault

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Desired outcome
Eliminate or dramatically reduce transportation devices contribution to carbon emission. Be able to cut down vehicle footprint and the number of vehicles operating on the road at any one time. Provide a sound and friendly module transportation system that are used by the public on a daily bases even for people without the Aventos vehicle.

Ease the finance pressure on small and medium sized businesses by providing an adaptive transportation device for their daily needs.

Assist the younger generation in adapting to the neo-nomadic lifestyle because the vehicle can assist in independent moving operations without the need of external assistance. Provide a fresh, young and eco friendly image for medium sized city commercial vehicles to the general public.

Designer : Timothy Choi

Text from Yiftach :

SeaO2 is an experimental ecological housing project. The project poses an alternative to current plans for Tel Aviv North West coastal district. SeaO2 demonstrates vast use of cutting edge computer software, some being used in the aerospace industry, in order to improve building performance and to ensure the existence of a sustainable urban environment with a minimal ecological footprint. The project final form is a consequence of a scientific approach that calculates numerous of elements: the sun orbit, wind conditions, maximum open scenic views, very high density and more, all in a free-form organic manner.

Advanced Computer Simulations ensure the project’s credibility. The project’s unique morphology enables: optimized solar reception for heating at winter time, self-shadowing and solar reception for electricity generation at summer time, natural lighting, optimized natural ventilation, open looks to the natural coastal environment, public green spaces, rain collection and more. Various passive mechanical systems complement the basic morphology, enable better performance and create an energy efficient, environmentally friendly housing project

Designer : Yiftach Ben Meir

Designer : 4design

[Press Release]
Honda FC Sport Design Study Suggests Hydrogen Sports Car Future

LOS ANGELES, Nov. 19, 2008 – Honda today revealed the Honda FC Sport design study model, a hydrogen-powered, three-seat sports car concept, at the 2008 Los Angeles Auto Show.

The FC Sport emphasizes the design flexibility and potential of Honda’s V Flow fuel cell technology – already deployed in the Honda FCX Clarity sedan – and reconfigures it into a lightweight sports car design with an ultra-low center of gravity, powerful electric motor performance and zero-emissions. The design study concept is inspired by supercar levels of performance through low weight and a high-performance, electrically driven fuel cell powertrain.

“The Honda FC Sport explores how to satisfy automotive performance enthusiasts in a world beyond petroleum,” said Dan Bonawitz, vice president of American Honda Motor Co., Inc. “People who love sports cars will still have a reason to love in a hydrogen-powered future.”

The high-output Honda fuel cell powertrain and a sleek, aerodynamic body contribute to the vehicle’s performance potential. A modular approach to fuel cell component packaging and the electric drivetrain contribute to the FC Sport’s low center of gravity with the majority of vehicle mass distributed between the axles, creating the balanced weight distribution sought after in sports cars.

The ideal placement of the Honda V-Flow fuel cell stack and related components demonstrates the benefits of a platform-specific, hydrogen-powered fuel cell powertrain. The FC Sport is configured to accommodate a custom-formed high-power fuel cell stack, located between the rear seats, and a battery pack placed low in the middle of the vehicle. The electric motor resides just forward of the rear axle. Two fuel storage tanks, visible from above, are located above the rear axle.

The optimal placement of fuel cell components for performance also allows for a relatively large passenger cabin by conventional supercar standards with enough space for three seating positions. The interior layout focuses primarily on the driver with a racecar-like center driving position. The enclosed canopy opens upward from the rear to allow for entry and exit. Two rear passenger seats flank the driver’s left and right side.

The sleek, low-profile body is designed to convey a high-technology appearance with sculpting that combines angular shapes in the front of the vehicle that taper into geometric, hex forms in the rear. The rear hex forms house cooling radiators for the fuel cell. Formula 1-style barge boards behind the front wheels enhance high speed aerodynamics and convey the vehicle’s racing pedigree. The hydrogen storage tanks, visible from the rear deck, showcase the FC Sports fuel cell technology in much the same way that a “naked bike” motorcycle showcases its engineering technology.

The glacier white body color conveys the FC Sport’s clean environmental aspirations while the dark wheels and deeply tinted glass provide a symbolic contrast befitting of the vehicle’s unique combination of clean power and high performance. Green construction techniques further contribute to a reduced carbon footprint. An organic, bio-structure theme is carried through to the body construction where exterior panels are intended to use plant-derived bio-plastics.

The Advanced Design Studio of Honda R&D Americas, in Pasadena, California, developed the FC Sport design study with the primary objective of using existing fuel cell technology as the basis for an ultimate Honda sports car. Designer Jason Wilbur led the design efforts.

Honda R&D Americas, Inc. began its operations in California in 1975 with local market research activities and has steadily grown its capabilities over the past 33 years to include all aspects of new vehicle design and development. Recent development efforts include trend-setting products such as the Honda Pilot, Ridgeline, Element, Civic Coupe and Civic Si.

In 2008, the company opened two new design centers in Southern California: the Acura Design Studio (Torrance), for the research and design of new Acura products; and the Advanced Design Studio (Pasadena), for the exploration and development of advanced design themes for both Honda and Acura.

The company operates 11 major R&D facilities in North America, including a full vehicle development center in Raymond, Ohio, and three design studios in Southern California. Honda R&D designers, engineers and support personnel are engaged in the development of Honda and Acura automobiles, powersports products, and power equipment for North America and global markets. The company’s main centers of operation include the Los Angeles Center (Torrance, California), responsible for market research, concept development and styling design; the Ohio Center (Raymond, Ohio), responsible for complete product development, testing, and support of North American supplier and manufacturing operations; and a dynamic test facility in Cantil, California.

Designer : Jürgen Mayer H.

Text from Alberto :
Space tourism is already a concept that many companies are taking seriously. Imagine that you have traveled to the moon with four other lucky tourists. You arrive on the moon which is still very empty, and now you and your four travel companions have six hours spare time. Design a moon recreation vehicle with this new form of travel and leisure activity in mind.

FOUR WHEEL STEERING ensures soil preservation by two footprints while providing improved steering.

COORDINATED STEERING reduces damage on the moon surface since turning impact is limited to two footprints by turning front and rear wheels in the opposite direction.

PACKAGE: Passenger Seats are distributed in order to offer a wide central aile. Space is needed to access the seats due to the space suits size. The pilot is centrally located to improve his/ her visibility and vehicle control. Besides self-levelling and transport height according to the ground conditions, SUSPENSION ARMS place the rear of the vehicle near the ground in order to provide access for passengers and pilot.

ENVIRONMENT: The relatively insignificant lunar atmosphere involves:

A. FRAGILITY
- Footprints must be reduced since they will last for thousands of years à Solution
- Dust thrown up from the wheels must be minimized à Solution

B. HOSTILITY
- Extreme temperatures varying from 100ºC to -173ºCà Solution
- Heterogeneous topography à Solution &

CONCEPT: Moon Recreation Vehicle that allows exploration and cooperation with professional astronauts while minimizing influence on the environment. The self-leveling on the move provided by the suspension arms improve the conditions of transport and in addition it is intended to create the sensation of walking on the moon!

MOON RECREATION VEHICLE

The body concept consists of 4 panels (two side panels, the roof and the floor which would also have a function of frame since it would contain the drive unit). These panels would be assembled on the “skeleton” frame (similar to one of the sketches). Suspension arms and wheels would complete the vehicle. So all the parts would fit into the shuttle meanwhile the final assembly could be undertaken at the moon.
The idea behind the glass panels is to provide windows as bigger as possible in order to offer a big scope for the passengers. The driver would also enjoy a big windscreen. I guess an environment like the Moon might intimidate. The idea is to transmit safety by means of:
- rounded surfaces: things like an egg or a dome are structural masterpieces.
- width provided by the suspension arms and wheels around the vehicle body: the moon surface is quite waved and hilly.

The footprints left behind by the Apollo astronauts will last for many thousands of years because there is no wind on the Moon. The Moon has no atmosphere, so there is no weather to erase the footprints. Although gravity is extremely low, we are talking about a big vehicle with five people inside so I think wide wheels would reduce compaction and by no means are useless, since the concept pretends to be as friendly with the environment as possible.

The beginning of the project coincided with the announcement of The Police tour. After all, the lyrics provided me with some messages about the environment and the vehicle.

Designer : Alberto Seco

T.E.D. (Transportable Emergency Dwelling) is a product which takes advantage of two systems to solve a global problem. The world has an incredibly advanced transportation infrastructure which allows product to move from country to country with relative speed and efficiency. Emergency housing is needed globally so why not use that infrastructure to our advantage. To optimize the shipping of these housing units they must fit within the footprint of the most widely used shipping containers. Each housing unit is self sustaining in the correct conditions, meaning it can collect water and create energy through solar panels. One shipping container can house two families of 4 people comfortably. It can be expanded to fit more. Once these units are done being used, they may be shipped back to their origin for restoration and refurbishment for their next adventure.

Designer : Craig Mackiewicz

Designer : Sean McGreevy