This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

The executive director of the spaceport Steve Landeene said “Its real and you are definitely not talking about drawn things on paper anymore.” The spaceport is envisioned to work as an airport with different routes where aerospace companies will lease building and hanger space. Spaceport America is not just about space tourism, additionally, it will also include other business ventures like communication projects and medical research. According to the state officials, the site will facilitate around 500 construction jobs and will spark the economic development, tourism and education for generations. The runway of the project is estimated to finish next summer and the hanger and terminal should be prepared for tenants during the end of 2010.

Designer : URS/Foster + Partners

The new deck position allows direct access to the kitchen and dining room and offers additional activities combining with the salon/ living room. The pool deck can be traversed in three ways. First one is a direct outside walkway or bridge which divides the pool with an underwater opening that allows the swimmers to plummet from one side to another. Second method is a flyover which connects to the central stairs and elevator. A lower level lounge is the third option which includes glass portals into the pool. There is a helipad on the bow deck and the yacht can house 12 guests and crew.

[Press Release]

Infinitas is the second design launch of Schöpfer Yachts. Our new 300 foot (91.5 meter) yacht was designed by E. Kevin
Schopfer with Sparkman Stephens, Naval Architects. The design’s main inspiration comes from the symbol for infinity which has been abstractly expressed within the yacht’s elevation. The two major features of the yacht asserted by this closed loop infinity symbol are achieved by carving out stern and mid section elliptical deck constructs.

A central structural “spine” holds the loop together allowing the yacht’s superstructure to seamlessly flow within itself. The added benefit of “infinity” is the realignment of traditional functional areas. Within this realignment, the main deck living room, and dining room are detached. The dining room moves forward and is separated from the living room by a massive pool deck. This new deck location allows for the first time, direct access to dining room and kitchen for expanded activities, in combination with the living room/salon.

There are three methods to traverse the pool deck. First is a direct outside bridge / walkway which bisects the pool itself. This walkway has underwater openings in its support system, allowing swimmers to dive from one side to another. The pool has the option of being covered for larger venue needs.

The second method of crossing the pool deck is an overhead sky bridge which connects to the main stairs and elevator. The “sky” bridge is clear glass floor and ceiling allowing natural light to penetrate the pool below.

The third method is through a lower level lounge which features glass portals into the pool.

The main level contains the two aforementioned decks, living room, dining room, kitchen, storage, and bow deck (with helicopter pad). The interior design of the space, and others, reflects an intense minimalist palette with a dash of attitude. The main salon also features generous 12 foot ceiling height and fully glazed walls creating an island within the yacht.

The second level up is reserved for a series of guest suites and secondary bow deck. The owner’s suite occupies the third level with “sky bridge,” pilot house, and upper deck. All decks below are currently designated crew quarters, storage and
mechanical, engine room activities. Infinitas is designed to accommodate 12 guests and crew.

Thank you to Tangram 3DS for all rendering images.

Designer : Schopferyachts

Designer : Constance Guisset and Cid Grégory via [HomeDosh]

Designer : J. David Weiss

Text from Yiftach :

SeaO2 is an experimental ecological housing project. The project poses an alternative to current plans for Tel Aviv North West coastal district. SeaO2 demonstrates vast use of cutting edge computer software, some being used in the aerospace industry, in order to improve building performance and to ensure the existence of a sustainable urban environment with a minimal ecological footprint. The project final form is a consequence of a scientific approach that calculates numerous of elements: the sun orbit, wind conditions, maximum open scenic views, very high density and more, all in a free-form organic manner.

Advanced Computer Simulations ensure the project’s credibility. The project’s unique morphology enables: optimized solar reception for heating at winter time, self-shadowing and solar reception for electricity generation at summer time, natural lighting, optimized natural ventilation, open looks to the natural coastal environment, public green spaces, rain collection and more. Various passive mechanical systems complement the basic morphology, enable better performance and create an energy efficient, environmentally friendly housing project

Designer : Yiftach Ben Meir

[Press Release]
Honda FC Sport Design Study Suggests Hydrogen Sports Car Future

LOS ANGELES, Nov. 19, 2008 – Honda today revealed the Honda FC Sport design study model, a hydrogen-powered, three-seat sports car concept, at the 2008 Los Angeles Auto Show.

The FC Sport emphasizes the design flexibility and potential of Honda’s V Flow fuel cell technology – already deployed in the Honda FCX Clarity sedan – and reconfigures it into a lightweight sports car design with an ultra-low center of gravity, powerful electric motor performance and zero-emissions. The design study concept is inspired by supercar levels of performance through low weight and a high-performance, electrically driven fuel cell powertrain.

“The Honda FC Sport explores how to satisfy automotive performance enthusiasts in a world beyond petroleum,” said Dan Bonawitz, vice president of American Honda Motor Co., Inc. “People who love sports cars will still have a reason to love in a hydrogen-powered future.”

The high-output Honda fuel cell powertrain and a sleek, aerodynamic body contribute to the vehicle’s performance potential. A modular approach to fuel cell component packaging and the electric drivetrain contribute to the FC Sport’s low center of gravity with the majority of vehicle mass distributed between the axles, creating the balanced weight distribution sought after in sports cars.

The ideal placement of the Honda V-Flow fuel cell stack and related components demonstrates the benefits of a platform-specific, hydrogen-powered fuel cell powertrain. The FC Sport is configured to accommodate a custom-formed high-power fuel cell stack, located between the rear seats, and a battery pack placed low in the middle of the vehicle. The electric motor resides just forward of the rear axle. Two fuel storage tanks, visible from above, are located above the rear axle.

The optimal placement of fuel cell components for performance also allows for a relatively large passenger cabin by conventional supercar standards with enough space for three seating positions. The interior layout focuses primarily on the driver with a racecar-like center driving position. The enclosed canopy opens upward from the rear to allow for entry and exit. Two rear passenger seats flank the driver’s left and right side.

The sleek, low-profile body is designed to convey a high-technology appearance with sculpting that combines angular shapes in the front of the vehicle that taper into geometric, hex forms in the rear. The rear hex forms house cooling radiators for the fuel cell. Formula 1-style barge boards behind the front wheels enhance high speed aerodynamics and convey the vehicle’s racing pedigree. The hydrogen storage tanks, visible from the rear deck, showcase the FC Sports fuel cell technology in much the same way that a “naked bike” motorcycle showcases its engineering technology.

The glacier white body color conveys the FC Sport’s clean environmental aspirations while the dark wheels and deeply tinted glass provide a symbolic contrast befitting of the vehicle’s unique combination of clean power and high performance. Green construction techniques further contribute to a reduced carbon footprint. An organic, bio-structure theme is carried through to the body construction where exterior panels are intended to use plant-derived bio-plastics.

The Advanced Design Studio of Honda R&D Americas, in Pasadena, California, developed the FC Sport design study with the primary objective of using existing fuel cell technology as the basis for an ultimate Honda sports car. Designer Jason Wilbur led the design efforts.

Honda R&D Americas, Inc. began its operations in California in 1975 with local market research activities and has steadily grown its capabilities over the past 33 years to include all aspects of new vehicle design and development. Recent development efforts include trend-setting products such as the Honda Pilot, Ridgeline, Element, Civic Coupe and Civic Si.

In 2008, the company opened two new design centers in Southern California: the Acura Design Studio (Torrance), for the research and design of new Acura products; and the Advanced Design Studio (Pasadena), for the exploration and development of advanced design themes for both Honda and Acura.

The company operates 11 major R&D facilities in North America, including a full vehicle development center in Raymond, Ohio, and three design studios in Southern California. Honda R&D designers, engineers and support personnel are engaged in the development of Honda and Acura automobiles, powersports products, and power equipment for North America and global markets. The company’s main centers of operation include the Los Angeles Center (Torrance, California), responsible for market research, concept development and styling design; the Ohio Center (Raymond, Ohio), responsible for complete product development, testing, and support of North American supplier and manufacturing operations; and a dynamic test facility in Cantil, California.

NUVU: RESHAPING THE CITY

Within just a few years, cities all over the world will be at near bursting point. If mankind wants to retain the level of personal mobility it currently enjoys – and if the city is to survive – the only way forward is for a radical rethink of the type of cars driven there. One solution could be a car like Nuvu, designed for the city of the not-too-distant future.

“Nuvu is literally a ‘new view’ at the future of the city car. It is electric, of course, but as far as Nissan is concerned, for tomorrow’s city cars that is a given. No, the most important aspect of Nuvu is the interior design which provides great comfort and space in an intelligent package designed to make best use of our crowded roads and limited parking slots.”

François Bancon, General Manager, Exploratory and Advance Planning Department, Product Strategy and Product Planning Division, Nissan Motor Co., Ltd.

At a glance

- 2 +1 seating in compact 3m package
- Unique platform for Nuvu
- Zero emissions from EV drivetrain
- Drivetrain previews production EV due soon
- X-By-Wire control for all dynamic functions
- Extensive use of natural, organic and recycled materials
- An urban oasis complete with its own tree inside, which…
… provides shade for the interior, and
… generates solar energy via its ‘leaves’

Overview
There is about to be a seismic shift in the urban landscape. Within the next five to seven years, some 55 percent of the world’s population will live in the city, threatening total gridlock. Unless something is done, the irony of the phrase ‘personal mobility’ will be self-evident.

Look around at the cars in a typical city traffic jam today and the vast majority will have only one occupant and four empty seats. Some might have two occupants, a few three. But find one with four occupants or more and you’ll be doing very well.

Today, we buy a family car knowing that we’ll only ever need to use it to its full potential one or perhaps two percent of the time. Tomorrow, things will be different. Tomorrow, things have to be different.

“There is a new generation coming up who, finally, are questioning why we do the things we do. They are asking themselves, for example, why they are buying a large car when they know that for 99 percent of the time they will be in it on their own,” says François Bancon, General Manager, Exploratory and Advance Planning Department, Product Strategy and Product Planning Division, Nissan Motor Co., Ltd.

“It is our job to provide personal transportation that is better suited to people’s needs and to what the environment – in all senses – can cope with.”

Nissan’s vision for the future of urban transportation is encapsulated in Nuvu, a ‘new view’ of the type of car we will be driving in the middle of the next decade. Compact – it’s just 3 metres long – Nuvu is a concept vehicle with unique 2+1 seating. It is aimed at urban dwellers who don’t want to compromise on their personal freedom or their comfort, yet who appreciate that ‘something has to give.’

Nuvu is agile, easy to drive, even easier to park. And it is, of course, an electric vehicle (EV). As Bancon says: “We believe zero emission vehicles are one of the key solutions for tomorrow’s city car.”

Nuvu is described as a moving oasis, a haven of green tranquillity in the urban jungle. To underline this message, Nuvu incorporates a witty representation of its green credentials: across its all-glass roof are a dozen or so small solar panels. Shaped like leaves on a branch, the power they generate is fed to the battery using a ‘tree trunk’ within the car as a conduit. Nuvu also uses natural, organic and recycled materials within the cabin.

Nissan has already announced plans to introduce an all-electric car in Japan and the US in 2010 and to mass-market it globally in 2012. Nuvu is not that car, though it does share some of the technology that will feature in the planned production vehicle. Rather, it is a concept of how a Nissan EV might look in the near future.

In the longer term, Nissan foresees a future based around a line-up of zero emission vehicles regardless of their size, category and usage. Nuvu – or its production equivalent – is just one element of this emission-free future.

Nuvu in detail
The central thrust behind the development of Nuvu is not its motive power but its layout and use of space. Nuvu has been created for a city of the future, one that’s even more crowded than today.

That’s why it’s compact on the outside yet roomy on the inside. Built on a unique platform, it’s just 3 metres long and sits on a wheelbase of 1980 mm but is 1700 mm wide and 1550 mm tall to create a large and airy cabin.

Interior package
These dimensions provide all the interior room needed for the vast majority of city journeys. Nuvu has two regular seats and a third occasional chair that can be folded down when required. But, unlike some two-seater city cars currently on the market, it is a thoroughly practical proposition with an integral luggage area providing sufficient space for a typical supermarket or shopping expedition.

“It is a real car,” says Bancon. “There would be no disadvantages to using a Nuvu everyday. For the vast majority of users, three seats are more than enough most of the time.”

The packaging is designed to give priority to driver comfort with C-segment levels of space and the flexibility to invite one or two passengers on board. Cabin layout places the regular passenger seat beside but largely behind the driver’s seat, allowing the passenger to stretch right out. Ahead of this seat is a third occasional chair which, when not in use, is folded away into the dashboard assembly. But even when the third seat is in use, there remains sufficient legroom for both passengers.

In the interests of saving both weight and space, the third seat has a centre section made from hardwearing yet comfortable netting. This hammock-like approach also has the benefit of allowing cool or warm air to circulate around the occupant’s body for extra comfort.

Shopping bags, briefcases and smaller items of luggage can be stowed behind the driver’s seat while if the driver is travelling solo, larger items can be stowed in the passenger footwall.

City car research
“We did a great deal of research into how people use their cars in the city. We found that for 90 percent of the time, the driver was alone. For five percent of the time there was one passenger and for four percent of the time there were two passengers. You can do the math to find out how often four or more people were in the car!” says Bancon.

“We gave the second seat much more room than normal because when you take one passenger in your car it is usually someone you love and you want to make sure he or she is being carried in outstanding comfort,” he adds.

Natural materials
Many of the materials used inside Nuvu reflect an increasing concern for the environment. The floor is made from wood fibres pressed into laminate sheets and is studded with rubber inserts made from recycled tyres for grip.

To create a light and bright interior, the windscreen and roof merge into one extended panel running virtually the entire length of the car. But undoubtedly the most unusual feature of the interior is the ‘energy tree’ which rises from the luggage compartment floor to the roof behind the driver’s seat.

Solar panels
The energy tree is shaped like a thin trunk. As it reaches daylight it branches out under the glass roof providing occupants with protection from bright sunlight… just like a real tree. And providing a visual reminder of Nuvu’s green credentials, covering the branches are dozens of small solar panels shaped like leaves.

The panels absorb energy from the sun which is then fed back down the energy tree and used to help recharge the battery and provide an extra power boost for the electric motor. As well as being genuinely green energy, it is estimated that the power generated via the solar panels will save the equivalent of one full overnight charge from mains electricity each month.

Driver controls are as simple as possible. All the major functions – steering, braking, transmission and throttle – are ‘By-Wire’ while the steering is controlled by an aircraft-style steering yoke: with just one turn from lock to lock, the steering is very direct for agility and manoeuvrability in the city. Nuvu’s turning circle is just 3.7 metres. Thanks to its wide track and the use of 16 inch 165/55 tyres mounted on lightweight, almost transparent, wheels, ride comfort, stability and agility is of the highest order.

There are two pedals – for stop and go – stalks for minor controls and a digital instrument panel with dials for speed, distance covered and battery range. The instrument panel itself is formed of layers – rather like an onion – and like the energy tree is another example of design inspired by nature. “We call it bio-mimicry,” says Bancon.

Rear view/parking monitor
Two screens on the dashboard display the view behind the car – there are no door mirrors to disturb the airflow, but small cameras – and double as monitors for the Around View Camera which give a bird’s eye view of the car when manoeuvering or parking.

Saving energy was the guiding force behind the use of low-energy LED head and tail lamps, while Nuvu’s heating and ventilation system filters and cleans the city air as it passes through the vehicle. Not only does it produce no emissions at source, but Nuvu actually helps clean up the city environment.

Exterior and interior design
“Nuvu’s design is further clear evidence of Nissan’s continued desire to challenge convention and to explore all the possibilities that the EV could bring us. In many ways it was inspired by our two most extreme EVs of recent times: Mixim and Pivo 2.

“Significantly, though, Nuvu delivers a more realistic interpretation of two of the most important aspects of its forerunners – the ‘Friendly Innovation’ found in Pivo 2 and the ‘Sports Dynamics’ central to Mixim

“The result? We have designed a radical concept car that with just a few changes could go into production tomorrow,” explains Masato Inoue, Chief Designer, Product Design Department, Nissan Motor Co., Ltd.

Developed by designers at Creative Box Inc. – Nissan’s design think-tank – Nuvu’s green house has flowing lines with gentle curves inspired by nature. The distinctive shape of the door glass on either side gives the impression of a hot air balloon that’s being gently inflated by pressure from within, while tropical fish inspired the profile of the side window graphics as a whole.

This contrast between the natural, fluid shape of the greenhouse and the strength implied by the solidity of the lower body gives Nuvu a feeling of quality rarely found in a compact car.

Colour and materials
Nuvu’s visual impact is further enhanced by its unique body colour. Developed by Nissan Design, the shade is officially called Soft Feel Sandy Gold.

Matching the ecological values of an electric vehicle, the moulded plastics and synthetic elements found inside a typical production car have been replaced by natural materials and organic alternatives, such as the wood fibres and rubber from car tyres used for the flooring. The result helps create a relaxed, warm atmosphere within Nuvu’s cabin.

During the design development stage, key targets were to develop an EV that encompassed obvious modernity with engaging ambience and a playful aspect – hence the energy tree. “You don’t need to be a car lover to fall in love with Nuvu,” adds Bancon.

EV drivetrain
Nuvu is more than a styling concept of a future EV. It is a fully working mobile test bed for much of the technology that will be used in Nissan’s production EV to be launched in 2010. For this reason elements of its technical specification are being kept secret for the time being.

The electric motor used in Nuvu is mounted at the rear of the vehicle and drives the back wheels, though neither its exact specification nor the power and torque figures are being released at this stage. A driving range of 125 kms and top speed of 120 km/h are being made public, however.

Li-Ion battery
Similarly although it can be revealed that the batteries used are of the latest laminated lithium-ion type and have a capacity of 140 Wh/kg (watt-hours per kilogram), the total capacity of the batteries and number of modules are not being disclosed at this stage.

Nissan began research into high output Li-Ion cells as long ago as 1992, but today development is carried out by Automotive Energy Supply Corp. (AESC), a joint venture company set up by Nissan and NEC Group.

Unlike a conventional lithium-ion battery with its bulky cylindrical cells, the laminated Li-Ion battery as used in Nuvu has thin laminated cells and fewer components overall. This boosts its power by a factor of 1.5 at the same time as halving its physical size. It also remains twice as efficient as a conventional cylindrical Li-Ion battery even after five years or 100,000 kms of continuous usage.

Another bonus of the compact cell construction is that a thin modular design is possible with a commensurate improvement in battery cooling efficiency. Higher power outputs are achieved through material improvements made to its lithium manganate positive electrode and carbon negative electrode. The use of chemically stable spinal-structured manganese for the positive electrode also helps ensure safe operation.

Its compact size allows the batteries to be mounted under the seats and the vehicle’s flat floor, thus helping to keep the centre of gravity as low as possible.

A quick charge from empty to full should take between 10 to 20 minutes while a full charge should take between three to four hours from a domestic 220V socket.

Typical users
“The people who will be drawn to a car like Nuvu are many and varied,” says Bancon. “It is a cross generational car and not a signature vehicle for one generation.

“There will be common threads, however. They will be early adopters but more importantly they regard themselves as urban citizens. They don’t just work or live in the city; they are part of the city. They want a car that somehow expresses who they are and which reflects their personal ideology.”

Conclusion
Although clearly a concept vehicle exploring aspects of future vehicle design, Nuvu nevertheless embodies many messages for today. Its clever interior provides ample headroom, legroom and comfort for most everyday needs without occupying more road space than it needs.

The use of recycled and natural materials underlines Nuvu’s environmental message and while the energy tree might be considered as a piece of whimsy, the use of solar energy is an entirely sensible and practical technological solution to aid an emission free future.

“Nuvu is a concept car, for sure, but it is an entirely credible vehicle,” says Bancon. “It is light, clean and easy to drive. It is practical and a sensible size, yet it is also embodies an element of fun: the future doesn’t look so bad, after all.”

Designer : Nissan

Text from Alberto :
Space tourism is already a concept that many companies are taking seriously. Imagine that you have traveled to the moon with four other lucky tourists. You arrive on the moon which is still very empty, and now you and your four travel companions have six hours spare time. Design a moon recreation vehicle with this new form of travel and leisure activity in mind.

FOUR WHEEL STEERING ensures soil preservation by two footprints while providing improved steering.

COORDINATED STEERING reduces damage on the moon surface since turning impact is limited to two footprints by turning front and rear wheels in the opposite direction.

PACKAGE: Passenger Seats are distributed in order to offer a wide central aile. Space is needed to access the seats due to the space suits size. The pilot is centrally located to improve his/ her visibility and vehicle control. Besides self-levelling and transport height according to the ground conditions, SUSPENSION ARMS place the rear of the vehicle near the ground in order to provide access for passengers and pilot.

ENVIRONMENT: The relatively insignificant lunar atmosphere involves:

A. FRAGILITY
- Footprints must be reduced since they will last for thousands of years à Solution
- Dust thrown up from the wheels must be minimized à Solution

B. HOSTILITY
- Extreme temperatures varying from 100ºC to -173ºCà Solution
- Heterogeneous topography à Solution &

CONCEPT: Moon Recreation Vehicle that allows exploration and cooperation with professional astronauts while minimizing influence on the environment. The self-leveling on the move provided by the suspension arms improve the conditions of transport and in addition it is intended to create the sensation of walking on the moon!

MOON RECREATION VEHICLE

The body concept consists of 4 panels (two side panels, the roof and the floor which would also have a function of frame since it would contain the drive unit). These panels would be assembled on the “skeleton” frame (similar to one of the sketches). Suspension arms and wheels would complete the vehicle. So all the parts would fit into the shuttle meanwhile the final assembly could be undertaken at the moon.
The idea behind the glass panels is to provide windows as bigger as possible in order to offer a big scope for the passengers. The driver would also enjoy a big windscreen. I guess an environment like the Moon might intimidate. The idea is to transmit safety by means of:
- rounded surfaces: things like an egg or a dome are structural masterpieces.
- width provided by the suspension arms and wheels around the vehicle body: the moon surface is quite waved and hilly.

The footprints left behind by the Apollo astronauts will last for many thousands of years because there is no wind on the Moon. The Moon has no atmosphere, so there is no weather to erase the footprints. Although gravity is extremely low, we are talking about a big vehicle with five people inside so I think wide wheels would reduce compaction and by no means are useless, since the concept pretends to be as friendly with the environment as possible.

The beginning of the project coincided with the announcement of The Police tour. After all, the lyrics provided me with some messages about the environment and the vehicle.

Designer : Alberto Seco

[Press Release]
ONDELIOS: AN ENVIRONMENTALLY-FRIENDLY LONG-HAUL JOURNEY

The Paris Motor Show sees the wraps come off Renault’s top-of-the-range concept car Ondelios designed for lovers of long-haul travel who set store by comfort and refinement. Ondelios epitomizes Renault’s vision of the high-end crossover, combining a comfortable ride with respect for the environment. Clear illustrations of that vision are the vehicle’s ethereal design, its interior layout, and an original hybrid powertrain.

A sleek design that answers the call of the open road
The 4.8-metre-long, 1.6-metre high Ondelios has drawn inspiration from the world of aviation design to deliver high drag efficiency and a Cd of just 0.29. This long-distance voyager boasts sleek, smooth, amazingly fluid lines that make it appear as though it glides over the ground. It embodies Renault’s vision of high-end car. “Ondelios is inspired by motion rather than speed and is a whole new response to the call of the open road,” enthuses Patrick Le Quément, Renault’s Design Director.

The aluminium-finish grille is flanked by headlamp units that also suggest flowing motion, while its high-performance LED headlights are both longer lasting and more efficient. Another feature of Ondelios’ aerodynamic styling is the boomerang-shaped tail lights. They are built into the bodywork and ringed with air extractors to control the flow of air from the wheel arches. The glazed roof further emphasises the vehicle’s airy look and feel, bathing the interior in natural light. The steeply raked windscreen, which extends well down the bonnet, further accentuates this ethereal feel.

“We think of it as made from a single material, where the body and glazed areas merge into one. Ondelios is a glimpse of what the automobile might be in the medium term future,” adds Patrick Le Quément. The butterfly-type side doors, which also feature an extensive glazed area, add a further touch of elegance to the car’s overall styling. They swing out and upwards as the sills slide down to facilitate ingress.

The dark blue anthracite of the bodywork blends perfectly with the tinted glazed area, making the car look as if it were all of a piece and a single colour. The tailgate’s upper section rounds off the sleek, aerodynamic lines with a profiled glareshield that slides inwards to air and cool the cabin.

Ondelios sits on seven-spoke, 23-inch aluminium alloy wheels which contribute to its profiled styling. The propeller-like hubs draw airflow from the sides of the car to prevent turbulence. They operate in conjunction with the rim-side brake discs to ensure they suck in air effectively.

The sleek sidewalls of the large diameter 255/40 Michelin Pilot Sport tyres deliver outstanding drag performance. Their tread pattern is designed to minimise deformation of the contact patch while on the move to help curb rolling resistance. The tread has efficient, active flow channels which, together with the wide circumferential
groove that helps clear water, strengthen the image of a high-end, high-tech tyre.

Business-class comfort for a long-haul journey
The elegance of the Ondelios interior is in harmony with the call of the open road suggested by its exterior. To begin with, its layout is designed to profit from all the available space. There are three rows of seats that offer individual seating for six. With their cantilever mounts they give the impression of floating, while their kinematics are redolent of airplane seats. The electrically adjustable backs fold into comfortable, business-class positions, while occupants can deploy and retract their footrests at will. Although their slim lines speak of lightness, they are
designed, like giant leaves, to hug their occupants who can curl up in them to enjoy the comfort and support they afford. The height of the seats is carefully designed to ensure occupants are perfectly at ease when they talk to each other.

Unlike conventional door opening systems, the doors are hinged to the roof, which makes getting into the car extremely easy. The second row of seats slide forward and folds down to facilitate access to the third row.

In addition to seating comfort, the cabin exudes a highly refined ambience. The materials used are drawn from contemporary interior design and give the impression of sitting in a lounge on wheels. They blend soft, supple textures like light grey leather and fabric, as seen on the dashboard, seats and door panels. The colour of the seatbacks blends gradually from ochre to purple, further enhancing the sense of security and comfort.

Interior features and fittings are both modern and intuitive. The ergonomically designed controls, in keeping with Renault’s touch design approach, afford users efficient, comfortable ease of use.

The ample, flowing yet sober design of the broad dashboard echoes the car’s aerodynamic exterior. It is further highlighted by a roomy, suspended stowage compartment which is protected by a lit shell, while all the dashboard’s functional components are particularly user-friendly:
- active display skins show driver aid and ride information;
- a monitor at the base of the windscreen displays the different menus and pictures from the
door mirror cameras;
- three large strip displays provide driving-related information, revs and how the hybridized
drivetrain is operating;
- a digital speedometer.

The technologies with which Ondelios is equipped enhance the collective and individual well-being of all occupants. All the passengers, including those in the back row, have their own Samsung interactive portable multimedia devices which they can use for sharing data or multiplayer gaming. Speakers are also incorporated into the headrests and a multizone HVAC system enables each passenger to set the temperature to his or her own liking.

The smart technologies that have gone into designing Ondelios help drivers to settle in at the wheel, include a Samsung cell phone which also acts as a hands-free door lock recognizes the driver and loads all his or her personal settings, e.g. seat-adjustment settings and favourite music. The vehicle adds a final, friendly touch in the form of the back-lit logo which lights up to show that it has recognized the driver.

An environmentally friendly voyager
To complement the extensive work that has gone into Ondelios’s aerodynamics, some of the car’s structural parts are made from natural flax fibre for greater recyclability. In keeping with the commitment to make the car as light as possible, its body is made from carbon and the glazed areas from polycarbonate.

Ondelios is powered by a hybrid powerplant which combines a more powerful 205hp (150kW) version of the 2.0 dCi engine, with two 20kW electric motors at the front and rear. They operate in mild hybrid mode, giving the engine extra boost as required. They use a brake and boost system, recovering energy during braking then delivering it to the engine to boost acceleration. The front motor also uses fuel-saving stop-start technology.

The electric motor mounted on the rear axle drives the rear wheels when the ESP sensors detect a loss of traction, thus giving Ondelios the capability of a 4WD vehicle. The car is equipped with a lithium-ion battery that can deliver power of up to 4kW/h. With torque of 450Nm between 1,700 and 3800rpm, the diesel engine provides comfort and flexibility at all engine speeds for long-distance driving pleasure. The 2.0 dCi unit takes Ondelios from a standing start to 100kph in just 7.8 seconds. Driving through a seven-speed, double-clutch gearbox, it affords outstanding driving pleasure, while keeping fuel consumption at a frugal 4.5 litres/100km and CO2 emissions at a lowly 120g/km – very impressive for a top-of-the-range vehicle. Similarly, the body, chassis design and hybrid powertrain contribute decisively to protecting the environment.

Ondelios is a long-distance travel-loving aerodynamic crossover born for the open road. It is proof that caring for occupants and the environment is entirely compatible. Ondelios is a concept car that illustrates Renault’s vision of the high-end car of the near future.

Weights, dimensions, capacities
Length (mm) 4,805
Width (mm) 1,998
Height (mm) 1,605
Height with doors open (mm) 2,230
Wheel base (mm) 2,895
Front track (mm) 1,690
Rear track (mm) 1,720
Unladen weight (kg) 1,452
Boot (dm3) 530

Technical data
Internal combustion engine 2.0 dCi
Power in hp (kW) 205 (150)
Maximum torque (Nm) 450, from 1,700 to 3,800rpm
Electric motors Two 20kW electric motors: one at the front and one at the rear
Power supply 4kWh lithium-ion battery.
Size: 40dm3.
Weight: 50kg

Acceleration from 0 to 100kph (s) 7.8
CO2 emissions, combined cycle fuel consumption 120g/km, 4.5 litres/100 km
Transmission Double-clutch seven-speed automatic transmission
Internal combustion engine drive and electric motor drive
Tyres 255/40 ZR23

Wheels
Diameter: 23″.
Width: 9″

Partners
G Studio Bodywork
Michelin Tyres
Samsung Telephone for communication with vehicle
Mgs par Matérialise Sintered parts