Text from designer :

Airliner

This long distance transport vehicle is actuated by superconductive magnets. Superconductors produce frictionless levitation avoiding any mechanic resistance. The vehicle hover above the street. The superconductor is cooled down by electric condensers so the particles of the material nearly stop moving. A rail embedded in the street creates a magnetic field which will be written in the superconductors, positioned at a set distance from the magnetic rail. No mechanic fixation between rail an vehicle will be required. The electromagnetic field generated by the rail also speed up the vehicle. The magnetic field is only generated under the moving vehicle and wont be of any danger for other moving vehicles crossing the rail.

The airliner consists of a drivers cab and several modules which float autonomously, so the shipping volume is expandable. If no cargo is carried the drivers cab ally with the closing module to reduce the volume. At a logistic centre close by a freeway and a city, the cargo gets unload, stored and upload to the cityloader.

Cityloader

This compact transport vehicle is designed for distances up to 400 km and the city traffic. It is powered by electric engines and wheel hubs which can be recharged via plug`n`ride concept at the logistic centre or city stations. A modifiable loading space allows a wide spectrum of use.

Designer : Tobias Förtsch

This concept device can be held in ways that is comfortable by the user and enables the utilization of the index finger and thumb. Most amazingly, this device can produce electrical energy by any kind of movement, even slight vibration persuades electricity, which is used to charge this device. More energetic interactions, such as, swinging the device repetitively between and around the index finger and thumb, gives a greater charge. The user can learn, develop and combine varieties of techniques for not only powering the device, but also increase the hand dexterity and coordination.

The track control section includes an electromagnetic inducer that generates an electric charge for the device from any kind of vibration or motion. The volume control segment includes all the major electronic modules of the device, including phono input, headphone output, memory storage unit and logic board. The volume control contains basic controls only and no screen, allows less energy requirement. The soft exterior casing of both main parts and beads provide easy grip and tactility, and is consists of thermoplastic polyurethane, which is an energy efficient material to manufacture and consequently, can be effectively recycled. The inner casing is made of stainless steel and provides protection to the electrical equipments and offers a tactile weight to the device. Aside from giving the device a unique form, the cable connects the two sections and transfer energy to all other components from the power supply.

Revealing the cable detach screws can be done by pulling out the soft outer casing. Unscrewing these will separate the entire device into different components that will let the user customize, repair and replace the components. Adjusting volume and track selection can be controlled by turning the end beads within the consequent end sections. The power and play or pause is controlled by clicking the beads into the sections.

Designer : Thomas Mascall

Kenneth says :
Shake is a mp3 player that can be charged by shaking when the HOLD function is on. With HOLD off, the user shakes the player for PLAY/PAUSE. The action of shaking the player to play or charge it is similar to shaking a pocket watch to wind it. The similar semantics provide an interesting yet familiar experience of giving life to an electronic device.The form of Shake was developed based on the language of a pocket watch, not only through the operation of shaking but also visually. Using the form from an established typology, Shake provides a comforting familiarity in a sea of electronics with foreign shapes and forms.

The use of kinetic energy to charge the battery not only solves an environmental issue, but also a more personal one. In situations like a long commute home, the user can enjoy personal audio without worrying about the battery dying out.

An electromagnetic coil is connected to the battery, converting kinetic energy into electrical energy that charges the battery. The player connects to the computer via a USB cable through the headphone jack, facilitating the transfer of songs as well as the conventional method of charging.

Shake would utilize kinetic energy generation technology developed by start up company M2E Power. M2E’s micro-generator technology delivers 300% to 700% more power than existing kinetic energy solutions (according to the company’s website), harvesting sufficient energy from normal daily and mechanical motion to power a wide range of mobile electronic devices.

This technology allows Shake to charge even in the user’s pocket while he/her is walking around.

Designer : Kenneth Tay

Text from designer :
“There is No doubt the car which is belong to tomorrow should be faster and safer while it’s compatible with nature. Also as a result of Fossil Fuels Limitation and generated pollution by this kind of fuel, another propulsion should be replaced: “Electromagnetic”.

Propulsion that moves “Maglev” trains With high speed and incredible safety because of very low friction(almost zero) and central controlling. By improving this idea, it will bring us to appropriate velocity, safety and pleasure compatible with our environment and no damage to nature. Auxiliary propulsion has been placed from three caterpillar rubber track wheels which is 360 degree turnable for situations there is no magnetic road. Also the car cells will be charged while the car is parked on the road.

Exterior:
As you can see I’ve tried to make a curved body without any sharp part. The main body has inspired from feline body while peugeot features are sensible.

Interior:
Followed by Exterior body, Interior is a combination of continuous parts. Multimedia and navigation systems are touch screens which their themes are changeable. The main screen shows a perfect view from behind and help you to drive the car reversely by inverting steering wheel without looking back.”

Designer : Hossein Ghahramani

Designer : Mike Serafin via IGreenSpot

Different directions of extruding make different functions for the phone and the camera.

Camera Usage (Extruding vertically)
Extruding to a little extend: focus (take photos) ,
Extruding to a larger extend: pulling the trigger
Release: Photo finish

Designer : Jian Qian

Designers : Wang Tsun Ho, Wang In Su, Lee Jong Heui, Lee Young Don