Designer : Batyr Ospanov

Some explanation from Edwin :
The exterior desing of the car is inspired by the form of fabric blown in the wind. The form also carries traces of the historical Auto Union Type C Streamline race.

There are no conventional doors on the car, but instead, inspired by the jet fighters, there are three glass canopies. The main canopy opens forward together with the steering wheel and the dashboard; the two passengers’ canopies open backwards; and a side panel on the bodywork opens downwards to act as a step, making the event of getting in and out of the cockpit very special and easy.

The interior is simply one continuous sheet, starting from the dashboard, then being folded and bended to create floor carpet and seat.

The interior of the car is as simple and futuristic as the exterior. Single sheet transparent LCD dashboard displays all the essential data such as speed and mileage. The screen in the center of the steering wheel displays digital map. The information can also be projected on the canopy by a head up display. The
whole driving experience would be like flying a fighter jet. There is a small but handy luggage space behind the driver seat for handbags and suitcases. It is also an arm rest for the passengers.

Four wheels are housed inside the car’s four “legs”. Each wheel contains an Audi In-wheel Electric Drive Unit, making the car an evolution in Audi’s trademark “Quattro” all time four-wheel-drive system. The long range Supercharge-ion battery which powers the in-wheel motors are separated into two packs located in front of as well as behind the cockpit, creating a perfect 50:50 weight distribution of the car for excellent handling.

Specifications:
Length: 4480 mm
Width: 1900 mm
Height: 1060 mm
Wheel base; 3048 mm
Weight: 800 kg
En Engine: 4 Audi In-wheel Electric Drive Units
Power: 544 hp (4 X 100 kW)
Torque: 4500 Nm (3319.03 lb-ft)
0-100km: 2.9 s
Top Speed: 360 km/h

Designer : Edwin Conan

The design comprises both economic and technical efficiency. The chassis is covered in an unpainted swappable plastic skin, which eliminates the painting stage. The placement of the rear wheels within the rear quarter panel offer improved aerodynamics. The rear and front façade of the car contains thin-film OLEDs under the colored polycarbonate surfaces, through which users can personalize parameters like day-running lights or graphically expressing themselves by adding custom decals. This feature will also eliminate the need of placing individual lights for turn indicators or brakes.

The dashboard has been kept minimal for individual movable components; rather it contains a huge touch screen where most of the interactions between the car and the rider will take place. While driving, users can keep their other works going on through the internet connectivity and share their driving experience through social networking websites.

Designer : Irwan Azhari

The minimalist interior features control steering pod, a mimicking game like control where brake and gas paddles embedded close to the steering wheel, offering next generation driving environment. The wheels are fully immersed with rubberized tire with independent spoke arrangement that allows the wheels to absorb the road bumps without having used the suspensions. Moreover, the out of the body wheel base has added few extra with the innovative look that the car already has with its clear body shell and green house like design.

The technology aspect of Pholeum includes a composition of memory plastic body work, allowing the material to be deformed back to its original shape under application of heat from scratches and dents. These plastic can be recycled further and remolded again into the same component if the damage is irreparable. The chassis is made of durable aluminum alloy, making the vehicle strong and lightweight. Comprehensive safety for the driver has been ensured with three external airbags, designed to deploy by sensing a fast automobile within a few meters of its radius through motion sensors. Each wheel contains quad electric motors empowered with efficient next generation hydrogen fuel cell technology.

Designer : Alexei Mikhailov

The interior of VIU was designed aiming the needs of the future users by serving as a living means of transportation. The design of the dashboard stimulates the eye with two lateral LED lights that indicates an efficient driving meter and a tachometer. The 1+1 sitting arrangement of the car offers the exciting movement of a motorcycle together with the safety of a closed car. As the road turns, the car cabin inclinates with the turn and the back seat rotates following the turn to offer maximum driving excitement to the driver.

Up the drivers seat, there is a fan to blow on the drivers back and shoulders to motivate him and to provide an excitingly fresh environment during the hot season when moisture accumulate on the seat, another air fan is there to dissipate the moisture. The steering wheel is actually a drumming pad, which can jam in the speakers when the user drums on the wheel spontaneously. This extremely cost-effective vehicle will cost five cents only with Eneloop batteries for one month, eight hours a day use.

Designer : Quim Vila-Masana Mas

Designer : Tryi Yeh

Cherry will offer easy control using the throttle and the break lever and requires very small place to park. By using lightweight elements such as small battery and carbon-fiber plastic body, this vehicle weights around 40kg or less only and can be carried anywhere easily. The high torque of the electric motor, lightweight design and strong grip via three wheel drive has made it a big performance vehicle. The designer envisioned this vehicle as a transportation solution for every person in future world when space-efficiency would be one of the biggest concerns among mankind.

Designer : Alican Yilmaz

Designer : Apostol Tnokovski

[Press Release]
Mercedes-Benz F-CELL Roadster – trainees build a car of the future

* Young people unite high tech and tradition

* Alternative drive systems as a training topic

In a hitherto unique project bridging various fields of profession, the trainees of Daimler AG at the Sindelfingen Mercedes-Benz plant have built a Roadster with fuel cell drive. For about a year, more than 150 trainees and dual education system students worked on the overall concept, development, assembly, and completion of the F-CELL Roadster. This project involved junior employees from the fields of automotive mechatronics, model-building, electronics, coating technology, manufacturing mechanics, product design, and interior appointments. The prime objective of the project was to integrate the topic of alternative drive systems into training with hands-on experience.

“This project impressively demonstrates that the topic of sustainable mobility has become an integral part of our vocational training,” said Human Resources Board member and Labor Relations Manager Günther Fleig. “I am delighted to see how much initiative and creativity the young people have put into this project.”

Tradition meets the future

The F-CELL Roadster uniquely combines state-of-the-art technologies with the history of vehicle construction. As an allusion to the Benz Patent Motor Car from 1886, the vehicle is fitted with large spoked wheels. Moreover, the F-CELL Roadster incorporates stylistic elements from diverse eras of automotive history, such as the carbon-fiber bucket seats with hand-stitched leather covers and the distinctively styled fiberglass front section, based on the component from the Formula One racing bolides.

The F-CELL Roadster is controlled with drive-by-wire technology, and a joystick takes the place of a conventional steering wheel. The vehicle is powered by the emission-free fuel cell system located at the rear. With a power rating of 1.2 kW the F-CELL Roadster reaches a top speed of 25 km/h and has an operating range of up to 350 km.

Designer : Mercedes Benz via [Jalopnik]

Designer : Matias Conti