Some explanation from Edwin :
The exterior desing of the car is inspired by the form of fabric blown in the wind. The form also carries traces of the historical Auto Union Type C Streamline race.

There are no conventional doors on the car, but instead, inspired by the jet fighters, there are three glass canopies. The main canopy opens forward together with the steering wheel and the dashboard; the two passengers’ canopies open backwards; and a side panel on the bodywork opens downwards to act as a step, making the event of getting in and out of the cockpit very special and easy.

The interior is simply one continuous sheet, starting from the dashboard, then being folded and bended to create floor carpet and seat.

The interior of the car is as simple and futuristic as the exterior. Single sheet transparent LCD dashboard displays all the essential data such as speed and mileage. The screen in the center of the steering wheel displays digital map. The information can also be projected on the canopy by a head up display. The
whole driving experience would be like flying a fighter jet. There is a small but handy luggage space behind the driver seat for handbags and suitcases. It is also an arm rest for the passengers.

Four wheels are housed inside the car’s four “legs”. Each wheel contains an Audi In-wheel Electric Drive Unit, making the car an evolution in Audi’s trademark “Quattro” all time four-wheel-drive system. The long range Supercharge-ion battery which powers the in-wheel motors are separated into two packs located in front of as well as behind the cockpit, creating a perfect 50:50 weight distribution of the car for excellent handling.

Specifications:
Length: 4480 mm
Width: 1900 mm
Height: 1060 mm
Wheel base; 3048 mm
Weight: 800 kg
En Engine: 4 Audi In-wheel Electric Drive Units
Power: 544 hp (4 X 100 kW)
Torque: 4500 Nm (3319.03 lb-ft)
0-100km: 2.9 s
Top Speed: 360 km/h

Designer : Edwin Conan

Victor says about Mytho :

The MYtho, is a concept car designed to be simple, but at the same time sophisticated. With inspiration from vintage cars, like the woodies, i was able to find a sustainable design solution for the side panels, which are made of compressed wood also the whole body is made of aluminum, in order to be recyclable.

The “tech” factor is in it’s OLED displays, build-in solar cells, and HUD display’s for the driver.

The form of the car is very simple, like the hot rods from the 30’s. The open wheel design, the huge front grill, and the low profile of the car, are just some indicators of this.

Designer : Victor Uribe Chacon

The design comprises both economic and technical efficiency. The chassis is covered in an unpainted swappable plastic skin, which eliminates the painting stage. The placement of the rear wheels within the rear quarter panel offer improved aerodynamics. The rear and front façade of the car contains thin-film OLEDs under the colored polycarbonate surfaces, through which users can personalize parameters like day-running lights or graphically expressing themselves by adding custom decals. This feature will also eliminate the need of placing individual lights for turn indicators or brakes.

The dashboard has been kept minimal for individual movable components; rather it contains a huge touch screen where most of the interactions between the car and the rider will take place. While driving, users can keep their other works going on through the internet connectivity and share their driving experience through social networking websites.

Designer : Irwan Azhari

Ibex comprises high-end multimedia system including video, audio, wireless network connectivity and on-board memory storage, controlled through touch-screens located at the passenger console and swim deck. Moreover, the tower of this boat is equipped with rear facing cameras that will offer the rear-views to the driver for better driving. Within the front hatch, there is a color-matched and flush-mounted hard top that can be removed to reveal a luxurious foredeck bench. This boat features direct drive propulsion mechanism that eliminates the probability of injury or unexpected situations on an exposed prop while lessening the boat’s draft also.

Designer : Peter Carrasquillo

Designer : Team Tentakulus

Designer : Jeongche Yoon and Hoyoung Kihl

Designer : Kioko Muthui

Designer : Apostol Tnokovski

The 2030 Honda’s luxury sports sedan, Zeppelin Concept, was designed with a design direction of “High-tech Dynamic”, inspired from an airship. The feeling of mass has been completed by applying design elements of aerodynamic form from an airship, and on top of that, expressed the distinct powerful image of Honda. Especially the asymmetrical main character line extends from the front hood along the roof line, to all the way back at the rear end. Hexagonal front grille and thick nose volume and the protruding horizontal lamp completes the dynamic face.

The interior was also inspired from the airship, reminiscent of a cozy salon or a first-class seat of an airplane. There is no dashboard in Zeppelin. All the necessary information and other elements needed for driving is displayed on the inter panel of the car, and everything is controlled with only the minimum physical movement due to the use of voice recognition technology. The seat position can be changed freely. That front row seat can rotate 360 degrees and so when the car is not moving, the front row seat and the back row seat can face each other. This makes it possible for a brief meeting, enjoying tea and even working in the car, which could also provide a new experience to the family or a fellow passenger. Due to the display environment on the windshield it was possible to use the angle of windshield and the shape of the A-pillar as a design element of the exterior without any restriction.

Designer : Myung Jin Jung

[Press Release]
Mercedes-Benz F-CELL Roadster – trainees build a car of the future

* Young people unite high tech and tradition

* Alternative drive systems as a training topic

In a hitherto unique project bridging various fields of profession, the trainees of Daimler AG at the Sindelfingen Mercedes-Benz plant have built a Roadster with fuel cell drive. For about a year, more than 150 trainees and dual education system students worked on the overall concept, development, assembly, and completion of the F-CELL Roadster. This project involved junior employees from the fields of automotive mechatronics, model-building, electronics, coating technology, manufacturing mechanics, product design, and interior appointments. The prime objective of the project was to integrate the topic of alternative drive systems into training with hands-on experience.

“This project impressively demonstrates that the topic of sustainable mobility has become an integral part of our vocational training,” said Human Resources Board member and Labor Relations Manager Günther Fleig. “I am delighted to see how much initiative and creativity the young people have put into this project.”

Tradition meets the future

The F-CELL Roadster uniquely combines state-of-the-art technologies with the history of vehicle construction. As an allusion to the Benz Patent Motor Car from 1886, the vehicle is fitted with large spoked wheels. Moreover, the F-CELL Roadster incorporates stylistic elements from diverse eras of automotive history, such as the carbon-fiber bucket seats with hand-stitched leather covers and the distinctively styled fiberglass front section, based on the component from the Formula One racing bolides.

The F-CELL Roadster is controlled with drive-by-wire technology, and a joystick takes the place of a conventional steering wheel. The vehicle is powered by the emission-free fuel cell system located at the rear. With a power rating of 1.2 kW the F-CELL Roadster reaches a top speed of 25 km/h and has an operating range of up to 350 km.

Designer : Mercedes Benz via [Jalopnik]