Text from Eli :
The Gluco(M) is a medical concept that provides diabetics with three functions: instant and non-invasive glucose readings, history of previous readings with averages, and an insulin chamber with a loaded syringe cartridge for injections.

Diabetics must monitor their own blood glucose levels times a day, to determine how far above or below normal their glucose is and to determine how much insulin(s) they may need. This is usually done by placing a drop of blood from a skin prick onto a glucose strip and then inserting the strip into a glucose meter, a small machine that provides a digital readout of the blood glucose level.

The Gluco(M) uses a technology known as “reverse iontophoresis.” By using an electric current running throughout the sensors, it collects glucose samples from fluids in the body. The device is then able to read the sample and give a reading. With this technology, diabetics can keep a much closer watch on their glucose levels and avoid the problems that may occurs from having levels too high or low. The Gluco(M) enables users with the convenience of checking blood-sugar levels more frequently throughout the day, thus yielding for better control of glucose in the blood stream.

Designer : Eli Hariton

Kenneth says :
Shake is a mp3 player that can be charged by shaking when the HOLD function is on. With HOLD off, the user shakes the player for PLAY/PAUSE. The action of shaking the player to play or charge it is similar to shaking a pocket watch to wind it. The similar semantics provide an interesting yet familiar experience of giving life to an electronic device.The form of Shake was developed based on the language of a pocket watch, not only through the operation of shaking but also visually. Using the form from an established typology, Shake provides a comforting familiarity in a sea of electronics with foreign shapes and forms.

The use of kinetic energy to charge the battery not only solves an environmental issue, but also a more personal one. In situations like a long commute home, the user can enjoy personal audio without worrying about the battery dying out.

An electromagnetic coil is connected to the battery, converting kinetic energy into electrical energy that charges the battery. The player connects to the computer via a USB cable through the headphone jack, facilitating the transfer of songs as well as the conventional method of charging.

Shake would utilize kinetic energy generation technology developed by start up company M2E Power. M2E’s micro-generator technology delivers 300% to 700% more power than existing kinetic energy solutions (according to the company’s website), harvesting sufficient energy from normal daily and mechanical motion to power a wide range of mobile electronic devices.

This technology allows Shake to charge even in the user’s pocket while he/her is walking around.

Designer : Kenneth Tay

Sergio says “Outside the car industry technologies have been developed in order to regenerate power, like kinetic watches, wind turbine, geothermic energy absorption even a sustainable dance floor is developed that regenerates the energy from the bouncing of the floor.

Around those ideas I designed a car with a central kinetic axis that generates the power of the movement as the vehicle turns like two attached motorbikes.

Second, I thought electrical cars should be designed aiming for sensations and not for speed in order to preserve the batteries longer. At high speed the battery range drop considerably, so this vehicle would provide sensations at lower speeds.

Drivers that have lived in a virtual computer game word that want to drive a vehicle closer to a spaceship, something that can provide them with different sensations.”

Designer : Sergio Loureiro

Paul Howse words :
Luxury doesn’t have to mean expense or extravagance. Moreover, in the fragility of 21st century consumerism, exclusivity could go much further, where its perceptual value increases over time and through an experience of the product. Just as classic watches and historic cars develop a story and history over time, the owner of a vehicle should feel this experience. A patination of material such as bronze, that is hand-crafted or develops over time and is unique to each ownership situation would bring a valid ‘local quality’ that could be argued as being lost in today’s globalized world.

Technology was also an important part of the project, in that being at the forefront of technology would allow an entirely new, exclusive proportion of vehicle. By using bio-electric hybrid technology in situated low down in the chassis, I was able to celebrate the lack of an internal combustion engine and create an entirely new proportion of vehicle. The use of cameras and projections on the interior allows for the deletion of the traditional windscreen and allows the long, low, sculptural bonnet to run up over into the roof, uninterrupted. Again, something only exclusively possible with this car. I also wanted to emphasize the interior element, to show that it is cradled in the structure, a precious entity much like a Faberge egg. By suspending the interior in magnetic levitation it further separates it from the technical elements of the car whilst providing a truly serene ride quality.

As it is intended to be used only on special occasions and cosseted, it will be kept in a specifically designed building from which you can control the atmosphere the car is kept in and thus control the patination, much like a cigar humidor. The building will be covered in photo-voltaic solar panels and will be able to store up solar energy to be used to power the car. If energy levels drop, then it will run off the national grid, but otherwise it will be solely self-sufficient.

All of these factors should add up to truly unique, exclusive ownership experience, while a creating a mystique about the car, the like of which may not have been seen since the art deco period.

Designer : Paul Howse

Text from Adam about the background of this concept :

“In my research, I found that 97% of the iGeneration owns a computer and 75% are on Facebook or other social networking sites,” says the device’s creator, Adam Brodowski, a design student at Savannah College of Art and Design in the U.S. state of Georgia. “I also found that they are all hypertaskers who do multiple things all at once. Eating dinner, text messaging, doing homework and watching TV are all strung together.

“They are also very comfortable with technology and the Internet. They run personal blogs, surf the web all day long, email back and forth and so on. Most importantly, they enjoy creating content to fuel the web and be noticed.”

All Units: This shows the various units of the Sook off the dock and ready to be used.

Docked: Shows all of the Sooks parts docked together. In this form the Dock and Touch can still be used.

Sook Touch: The Sook Touch is used to display and drag ingredients to build custom recipes. Ingredients are added when the Dock or Cut understands food near it. This then gives the user a bank of items to incorporate into there meal.

Sook Cut: The Sook Cut a cutting board containing a moisture sensor, weight sensor, and electronic tongue. It uses these sensors to identify what food is bring cut on the board and how much is being used. It then transmits this information to the Sook Touch to begin generating a recipe.

Sook Dock: A picture of the Sook Dock. Along with charging the Sook Cut and Touch the Dock works as a RFID scanner to identify what foods are near it, be it new groceries it can use for meals later, or food that is being set out to cook something currently.

Designer : Adam Brodowski

Designer : Isamu Sanada via GizmoWatch via Apple-Style

Well this wireless headset looks cool and uses the Bluetooth technology to connect to the mobile phone and RF to connect to the actual ear buds. So technologically this sounds a cool concept.

Targeting various market segments Plantronics Versa comes in different shapes and sizes for men and women and teenagers! Well for men it is long, slim and metallic targeting the gizmo flashing man. While for women, it is in the form of a chrome necklace thus encouraging it to be more of ornamental value. While for the teenagers it’s a colored combo of necklace and clip made of anodized aluminum (whatever that is). As per plantronics, the device can be launched within next two years. So shouldn’t be long when you catch hold of this one gadget in your hands.

Designer : One & Co

Designer : Ricardo Baiao