PAD is a digital pet family that improves the consumption of energy by monitoring the status of the environment.

The main controller of the ‘Stand Off’ is the accelerometer that can detect the exact location of an object and sends Bluetooth signal to switch the appliance on or off.

The ‘Re-Siker’ system with its two parts has been designed for recycling stations that can pack bags and provides a serial number through one part and the other part informs the user on recyclable items among them and ways of compositing and implementing them in the market.

Intelligent Organizer is a device that solves the electric line over-charging problems.

DNA is a floating unit that can generate continuous and affordable energy from the sun and wind.

Recycle is an exercise bike integrated with energy producing ability.

Light concept can produce florescent and luminescent illumination without using electricity.

E-plant provides easy energy consumption information.

Self Control device improves knowledge and perception of in-house energy consumption.

From : Samsung Young Design Award via DesignBoom

For its occupants, the open bodywork of the car represents highly practical solution for urban mobility through a turning required circle of only three meters and a footprint hardly larger than that of a scooter. The wheel provides easy and agile handling that ensures rarely getting stuck in the traffic, while the low center of gravity of this four-wheeler provide excellent stability.

A completely unique feature of this car is its octagonal wheel fairings that entirely cover the tires. This innovative design creates a pleasing and harmonious feeling along with its pearl-white and blue hub caps, where no one can see the wheel rotating any longer. Instead, the movements of the hub caps are only being seen, giving a silent and graceful gliding appearance along the road.

The Twizy Z.E. concept car is powered by a 20hp (15kW) electric motor that can develop 70Nm of torque, combining comfort with reactive performance at any engine speeds. It can accelerate like a 125cc bike and pulls away quickly from standstill. The car features a 75kph of top speed which may not seem a big number, but since it is designed to be used in busy traffic, it still is a fast car while cutting the traffic easily.

Designer : Renault

From : Peugeot

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Interview with Nico :

What was the inspiration for your concept?
The inspiration was the experimental approach to molecular cooking. Even after several decades of molecular cuisine, it still seems to be an exclusive game for specialists. So it became my main goal to bring some of the fantastic possibilities and ideas of molecular cooking to all ambitious cooks with an easy to use, affordable appliance.

How does your concept fit into this year’s competition theme “Designs for the next 90 years”?
I think the idea of molecular cooking is forward-looking, but the procedures and methods of preparing molecular dishes are still conventional. I would like to change this with my concept. At first, the idea of printing food seems to be something straight out of a science-fiction movie, but on second thought it is not unrealistic at all. I even think that Moléculaire could be the future kitchen tool that opens up possibilities for food-makers interested in molecular cooking.

What are the main consumer benefits of your concept?
Moléculaire is a futuristic kitchen appliance that offers several new possibilities to professional chefs as well as home users. It’s based on a layer-by-layer printing technique that arranges small particles from a set of ingredients. Within minutes, it prints out three-dimensional desserts, complex structures, shapes for molecular dishes, and patterns for decorating a meal. In addition, it’s easy to use. You simply insert a blister pack into the reservoir, place Moléculaire on top of a plate, and press the start button. Users can also create their own recipes with special software and their own ingredients. Ambitious users can download recipes and share them with other users in an online community.

Describe the consumer research behind your concept.
I conducted interviews with chefs and did a lot of research on the Internet. These approaches helped me to understand users’ interests, concerns, wishes, needs and desires. The outcome shaped my initial ideas and helped them grow. The most difficult thing about designing for the future is predicting the possible social and technological developments (their direction and speed). Therefore, it was very useful to read reports like sociological studies about cooking and future scenarios about the development of new technologies.

What kind of materials would you use to build your concept?
For my concept, I would use polycarbonate as the main material. I plan on applying this material in three different variations, each providing the right characteristics for the different parts of my design. Transparent polycarbonate can be used for the window, black tinted for the lid/display, and white for the body. The robotic printer arm and head could be made from aluminum. A blue (O)LED backlight accentuates the processes inside the printer.

Who is your favorite designer?
I don‘t have a favorite designer.

What are your career goals?
After I graduate in 2010, I want to gain more professional experience in a product-design company. In the long term, I want to further develop my conceptual and strategic skills and step into product-related design management.

Designer : Nico Kläber

Text from designer :

Airliner

This long distance transport vehicle is actuated by superconductive magnets. Superconductors produce frictionless levitation avoiding any mechanic resistance. The vehicle hover above the street. The superconductor is cooled down by electric condensers so the particles of the material nearly stop moving. A rail embedded in the street creates a magnetic field which will be written in the superconductors, positioned at a set distance from the magnetic rail. No mechanic fixation between rail an vehicle will be required. The electromagnetic field generated by the rail also speed up the vehicle. The magnetic field is only generated under the moving vehicle and wont be of any danger for other moving vehicles crossing the rail.

The airliner consists of a drivers cab and several modules which float autonomously, so the shipping volume is expandable. If no cargo is carried the drivers cab ally with the closing module to reduce the volume. At a logistic centre close by a freeway and a city, the cargo gets unload, stored and upload to the cityloader.

Cityloader

This compact transport vehicle is designed for distances up to 400 km and the city traffic. It is powered by electric engines and wheel hubs which can be recharged via plug`n`ride concept at the logistic centre or city stations. A modifiable loading space allows a wide spectrum of use.

Designer : Tobias Förtsch

Designer : Brad Mitchell

Gosha says :

“A hybrid airship is actually a hybrid between an airship and an airplane, deriving roughly two thirds of its lift from buoyancy of lighter than air gas, and the remaining third from aerodynamic lift generated by wings. The outcome is a craft which when loaded is only slightly heavier than the air around it, and therefore requires very little effort to become airborne and even less effort to cruise comfortably at around 120mph.

The Airship One has a semi-rigid construction, Aluminum and fiber composite frame supporting PU fabric ballonets filled with lighter than air, non flammable Helium gas. Propulsion is provided by four DC electric motors, which during cruise receive their energy from solar panels mounted on the hull and wings, and during takeoff also from a bio-diesel generator. The ship can take off and land vertically, with no need for a runway of any kind.

With its 30-ton cargo capacity and a double-deck passenger compartment which can accommodate some 25 passengers with levels of comfort that by far exceed those of the most luxurious airliner.

While currently only a concept, I strongly believe that in the not too distant future machines like the Airship One will offer a quiet, efficient and eco-friendly alternative to air transport.”

Designer : Gosha Galitsky

Designer : Harsha Vardhan via [EcoFriend]

[Press Release]

Husqvarna, the global leader of outdoor power products, has developed a quiet, powerful and environmentally friendly ride-on mower for the future garden. The concept mower, developed by Husqvarna’s designers and engineers, is made of recycled materials and gives an indication how the future of mowing might come to look.

-Husqvarna Panthera Leo™ demonstrates our innovation capacity and ambition to develop high performing products with less environmental impact, says Magnus Yngen, President and CEO of Husqvarna.

Husqvarna Panthera Leo™ is a hybrid made up of two ride-on mowers, Rider and Zero-Turn. A battery that can be charged at any electrical outlet has replaced the traditional gas engine. Five powerful electrical motors partnered with a sound absorbing cutting deck, allow the Husqvarna Panthera Leo™ to glide effortlessly and silently across your lawn. The tree individually suspended cutting decks enables this mower to mow smoothly over bumpier parts of your garden, avoiding lawn scalping. The cutting decks each have razor sharp blades for a close cut finish and can be controlled to suit wide or narrow lawns (from 85cm up to 120cm).

All functions and are managed via paddles on the steering wheel. Via an LCD-display gardeners are told everything they need to know to achieve a perfect lawn, from how fast they are driving, cutting height, cutting width, remaining battery time, service needs and warns the user about objects that are too close. With the help of sensors, Husqvarna Panthera Leo™ can recommend the most suitable speed and cutting height for the perfect lawn.

Husqvarna is the leader in several areas in terms of products with reduced environmental impact. The Group’s new engines comply with the strictest exhaust-emission criteria in the US and Europe .

Features

* Equipped with zero-emission technology
* Produced from recycled materials
* Rechargeable Lithium-phosphate battery
* Plug-in product, charged at any electrical point
* Five brushless electrical engines, easy and clean to maintain
* Three separate cutters equipped with razor sharp blades
* Cutters individually suspended to glide smoothly over bumpy terrain and prevent lawn scalping
* Variable cutting width (85-120cm)
* Zero-turn functionality
* Lifting cutting deck (90 degrees)
* Ergonomic steering wheel
* Easy to control dashboard
* Cutting time 2 hours, overnight charging
* Detailed LCD display monitor (featuring cutting height, width of cutting deck, speed, service information, steep hill warning, objects that are too close)

Designer : Husqvarna