For its occupants, the open bodywork of the car represents highly practical solution for urban mobility through a turning required circle of only three meters and a footprint hardly larger than that of a scooter. The wheel provides easy and agile handling that ensures rarely getting stuck in the traffic, while the low center of gravity of this four-wheeler provide excellent stability.

A completely unique feature of this car is its octagonal wheel fairings that entirely cover the tires. This innovative design creates a pleasing and harmonious feeling along with its pearl-white and blue hub caps, where no one can see the wheel rotating any longer. Instead, the movements of the hub caps are only being seen, giving a silent and graceful gliding appearance along the road.

The Twizy Z.E. concept car is powered by a 20hp (15kW) electric motor that can develop 70Nm of torque, combining comfort with reactive performance at any engine speeds. It can accelerate like a 125cc bike and pulls away quickly from standstill. The car features a 75kph of top speed which may not seem a big number, but since it is designed to be used in busy traffic, it still is a fast car while cutting the traffic easily.

Designer : Renault

From : Peugeot

Text from designer :

Airliner

This long distance transport vehicle is actuated by superconductive magnets. Superconductors produce frictionless levitation avoiding any mechanic resistance. The vehicle hover above the street. The superconductor is cooled down by electric condensers so the particles of the material nearly stop moving. A rail embedded in the street creates a magnetic field which will be written in the superconductors, positioned at a set distance from the magnetic rail. No mechanic fixation between rail an vehicle will be required. The electromagnetic field generated by the rail also speed up the vehicle. The magnetic field is only generated under the moving vehicle and wont be of any danger for other moving vehicles crossing the rail.

The airliner consists of a drivers cab and several modules which float autonomously, so the shipping volume is expandable. If no cargo is carried the drivers cab ally with the closing module to reduce the volume. At a logistic centre close by a freeway and a city, the cargo gets unload, stored and upload to the cityloader.

Cityloader

This compact transport vehicle is designed for distances up to 400 km and the city traffic. It is powered by electric engines and wheel hubs which can be recharged via plug`n`ride concept at the logistic centre or city stations. A modifiable loading space allows a wide spectrum of use.

Designer : Tobias Förtsch

To enrich the alternative mobility, this vehicle is empowered with an electric engine and lithium-based batteries to accumulate the energy located under the seat and charging can be done by plugging-in any standard power socket. The uniquely forward lean main body is designed against the driving direction and the precise edges and clean surfaces add up to an important impression of the design.

Designer : Tobias Bexten

Designer : David Vega

From Adam :
Urban traffic congestion is an increasing problem which affects countless delivery companies every day. The unique “CarGo” concept addresses this issue with its variable track, wheelbase and load carrying configurations.

Due to its inherent flexibility, the CarGo would be an invaluable addition to any urban delivery company’s fleet by offering:
- Enhanced versatility for use in congested areas due to variable mode options.
- Faster delivery time in heavy traffic as narrow mode gives reduced width and higher maneuverability.
- Easier parking due to compact size.
- Eco-friendly status as a zero-emission electric vehicle.
- Reduced running costs i.e. lower fuel and road tax costs, congestion charge exempt.
- Clip-On composite body panels allow for corporate branding and low repair costs.

Designer : Adam Schacter

Designer : Stefan Wallmann

What Petr say about this Robotic Taxi :

Instruction to use robotaxi
- You call taxi by mobile phone
- Robotaxi operator will evaluate the closest taxi
- Robotaxi will arrive in very short time and open the door for you
- Put your baggage and go inside the taxi
- You need to set your destination (by your voice or by touch panel)
- While in the road, you can watch video on double-sided cabin window or surfing on internet
- Payment will be done automatically (by wireless reading from you credit card)

Designer : Petr Kubik

[Press Release]
The future headquarters of Antwerp Port Authority will be designed by the London firm of Zaha Hadid Architects. The choice of architect was made at the Port Authority board meeting on 13 January. The new Port House will occupy the site of the technical services building on quay 63.

The Port Authority aims to make its operations more efficient by centralising the administrative and technical services which are now divided between the Port House and quay 63. The new headquarters will also solve the pressing shortage of workspace in the present Port House on the Entrepot quay. Some 500 people will be able to move into the new building when it is completed in 2013.

In addition to offering better accommodation, the future Port House will contribute to further development and upgrading of the part of the city known as Het Eilandje. The brief for the new building specified that it had to symbolise the Port of Antwerp as a world port and economic driver of Flanders and the Antwerp area. It also had to be built according to the principles of sustainability.

In selecting the architect it was decided to use the Open Call for Tender procedure of the Flemish Government Architect’s team. The procedure was launched in December 2007, and nearly 100 architectural firms responded. A shortlist of five firms was chosen:

• Consortium of TV A2O Architecten / Atelier Kempe Thill / Marcq & Roba / BEG from Hassel, Belgium
• Vier Arquitectos from La Coruña, Spain
• Xaveer De Geyter Architects from Brussels
• Zaha Hadid Architects from London
• Rapp + Rapp from Rotterdam

The jury/board of directors finally opted for the proposal by Zaha Hadid Architects, because:

• The design preserves as much as possible of the dignity of the present building as a monument, adding a new object to the site;
• The board and its advisors had confidence in a team such as Zaha Hadid Architects being able to further develop the project so as to achieve a high quality end result that can act as a “shop window” for the Port Authority.

The estimated construction cost is 31.5 million euros excluding VAT and architect’s fees. This includes all the work for an office building with around 12,000 m² of floorspace for around 500 people, together with underground parking for 300 or so cars.

The new building fits in with the Port Authority’s future-oriented investment policy. At the same board meeting it was also decided to purchase four tugs as part of a renewal series of nine. And of course there will be further investments in infrastructure for expansion and renovation of the port. The various Flemish port authorities are currently holding discussions with the Flemish Government about financing for basic port infrastructure.
The new Port House forms part of a programme of improvements to the Port Authority’s own buildings. In addition to various renovation and new construction work that has already been carried out, a public call for tender has been issued for the new VTS (Vehicle Traffic Service) building beside the Zandvliet lock.

Design proposal

The design team from Zaha Hadid Architects proposed a very dynamic architecture that strikes up a dialogue with the Oosterweel road link, with the Lange Wapper bridge forming a backdrop to the New Port House. With its unique design, its facade architecture and its height of 46 metres, the new Port Authority will be an iconic building, visible from many different directions.

The concept is a free interpretation of a beam-shaped volume raised above the existing fire brigade building and supported on three sculptured concrete pillars housing the stairs and lifts. Two of the pillars are situated on the covered inner courtyard of the firehouse, while the third is located beside an external support point and consists of a panoramic lift shaft.
The new volume is oriented North-South parallel to the Kattendijk dock. The head of the building on the South side is a frame that looks towards the city and clearly marks the start of the port area.
The outside walls are made up of glass triangles, some transparent and some reflecting. These do not all lie in the same plane but are rotated slightly with respect to one another, creating an attractive reflecting play of incoming light in a reference to Antwerp’s diamond industry.

The present firehouse will be kept free of building all around, so that the four outside walls will be fully respected. As for the arrangement of the inside spaces, consultations will be held with Flanders Real Estate Heritage and the Monuments department of the City of Antwerp to determine whether open-plan offices (as laid down in the schedule of requirements) are possible, either partly of throughout.

The inner courtyard will be roofed over at the height of the second story so as to create an air-conditioned inside space. This central entrance hall will be considered as a semi-public space, with various enquiry desks (Personnel department, Harbourmaster’s Office, Planning Permission & Environment Permit office and Port Dues payment desk) integrated in the inside wall portals.

A sculptural, sloping roof unites an underground lobby with the covered inner court. Access to the underground car park is an important aspect of the overall concept, with the loading & unloading bays and the refuse handling facilities also located here. The car park has space for 300 or so cars and consists of a single underground level. The design of the square can be arranged so that daylight is allowed to enter. The above-ground layout forms part of a design project that is being carried out in consultation with the city departments responsible, with the main imperative being to “preserve the visual quality of the outside spaces in the Het Eilandje area.”

The open plan offices are indeed very open, so that office staff will have a great impression of space with a view along the various outside walls. The concept for the open plan office also allows for small areas in which to hold meetings, along with separate study offices.

Designer : Zaha Hadid Architects via Bustler

mPower consists of 2 units: Generation and Collection.

mPower Generation is a plant-shaped human-powered unit that produces electricity for immediate and future use. Users access their account using fingerprint recognition, stand on two pads at the base of the unit, and shift their weight from one pad to the other every ten seconds. The system, developed to take up the least amount of a user’s time and effort, can be adapted for the handicapped. A small portion of the electricity generated is used to power the interactive touch-screen at the top of the unit, which offers a broad range of informational services pre-customised by each user. The remaining majority of the electricity generated is sent to the city’s main power plant, to be used or stored. At their convenience, users receive payment for the electricity they generated by accessing their account at mPower Collection.

mPower Collection is a unit that, using the same fingerprint recognition technology, distributes payment and allows for account customisation to users of mPower Generation.

mPower taps into our greatest natural resource: people. Rather than expending energy to create more, mPower harnesses the excess energy we generate by providing a platform for individuals and companies to create electricity, make money, and improve lives. By offering payment to individuals, including those that are homeless, in exchange for a few minutes of minimal movement via a free-to-use system available to everyone, economic and environmental sustainability and empowerment is made available by involving citizens in generating what has become one of our most essential needs: electricity.

mPower units are established by electric companies. Businesses pay electric companies to advertise on mPower Generation touch-screens; these ads are geared to individuals who previously expressed interest in particular products/services as per information entered upon account set-up, thus negating . This negates the need for expensive market research, PR and advertising campaigns. Electric companies pay consumers for generating electricity via mPower; these payments are competitive with fees paid by consumers for power provided by the same electric companies.

The base of the unit consists of two pads, each mounted on a hydraulic cylinder. The cylinders are connected by a micro-hydro turbine. When a person steps onto one of the pads, the resulting pressure forces fluid from one cylinder into the other, causing it to rise. The more a person repeats the movement of shifting his/her weight from one pad to the other, the more electricity is generated. This system can be replaced with piezoelectric pads or other technologies as appropriate.

In addition to the exercise users get while generating electricity, they can also benefit from services available on Generation’s interactive network, including news, community events, traffic information, public transportation information, calendar, time, date, music, weather, radio, product and service information, mobile device charging, internet, widgets, city maps, games, phone calling services.

mPower fits into our daily activities and ways of life without disrupting them. Generation and Collection units can be placed on, in, or near streets and pavements, public transportation waiting areas, airports and other areas where waiting is involved, parks and community areas, schools and universities, libraries, common areas in apartment blocks, and countless other places.

The concept of mPower can be modified to fit into homes, casinos, gyms, phone booths, internet cafes, and wherever generated energy can be used as direct power or in exchange for services and products such as climate control, public lighting, charging mobile phones and other devices. Other generation methods can also be implemented, such as walking, pedaling and running, see-sawing, swinging, and using body weight/heat. The possibilities are endless, sustainable, and empowering.

Designer : Sofian Tallal