Populous says :
Incheon Metropolitan City is a world class city, and this will be an innovative design, benchmarked against world’s best practice.

The multipurpose stadium builds on the design developed by Populous for the main stadium for the 2012 Olympic Games in London and illustrates a new level of sustainable design in public infrastructure built for major events such as an Olympics or an Asian games.

The key to the stadium’s success will be reducing it down and linking it into the surrounding parklands, to make it an open accessible building, for its people. This way it can achieve a connection with the community that is vital to securing its long term sustainability and a true legacy for the people of Incheon.

Designer : Populous and Heerim Architects and Planners

Because of the relatively shallow water levels of the Straits, the proposed structure can descend to the base of the ocean with just a few meters floating over the water level. Compression is the main working principal of this structure that features two parallel walls cut through the adjoining water bodies, held apart with bracing, which is habitable at times. Each wall is 10 meters wide and respectfully provides vehicle and train infrastructures at its apex. The trait is used only to give simplicity to this massive structure that features a direct line to connect the two sides.

The wide interstitial space spans 50 meters which was created by this vast separation and becomes an interface for human haulage, providing inhabitants and visitors the opportunity to navigate the Strait by walking. The visitors will enjoy constant views of underwater landscape walking across the tubes, submerged below 50 meters of water level. Moreover, the separation of the Pacific from the Arctic can improve temperature isolation, by gradually reducing the water temperature in the Arctic, which would be a great environmental benefit.

Designer : OFF Architecture via Bustler

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

The bicycle is designed to generate energy when riding and this energy can be used as currency to pay for your bus rides. The bike electronically folds into the bus seat storage mode for space and weight efficiency and to fit on the bike stand. Bike stands can be found at the bus stops where the bikes will be stored securely in order to collect energy from the sun and wind. Moreover, it contributes energy to the bus system that was generated during riding and stored in inner batteries. Finally, the energy will be accumulated from all the bus stops into the London Garden network system, which is the Universal Electricity Network of this concept.

Designer : Marten Wallgren, David Seesing, and Miika Heikkinen

To enrich the alternative mobility, this vehicle is empowered with an electric engine and lithium-based batteries to accumulate the energy located under the seat and charging can be done by plugging-in any standard power socket. The uniquely forward lean main body is designed against the driving direction and the precise edges and clean surfaces add up to an important impression of the design.

Designer : Tobias Bexten

Anton says :
“With increasing demand on an already over-stretched transport infrastructure it makes sense to shift the way that we move, by taking up less space per individual while in transit. The energy required to move the individual is also greatly reduced by reducing the size and weight of the vehicle.

The device also removes direct emissions away from the city and with the addition of environmentally sustainable power generation off-site, the device has the potential to have no net emissions.”

Designer : Anton Grimes

[Press Release]
The future headquarters of Antwerp Port Authority will be designed by the London firm of Zaha Hadid Architects. The choice of architect was made at the Port Authority board meeting on 13 January. The new Port House will occupy the site of the technical services building on quay 63.

The Port Authority aims to make its operations more efficient by centralising the administrative and technical services which are now divided between the Port House and quay 63. The new headquarters will also solve the pressing shortage of workspace in the present Port House on the Entrepot quay. Some 500 people will be able to move into the new building when it is completed in 2013.

In addition to offering better accommodation, the future Port House will contribute to further development and upgrading of the part of the city known as Het Eilandje. The brief for the new building specified that it had to symbolise the Port of Antwerp as a world port and economic driver of Flanders and the Antwerp area. It also had to be built according to the principles of sustainability.

In selecting the architect it was decided to use the Open Call for Tender procedure of the Flemish Government Architect’s team. The procedure was launched in December 2007, and nearly 100 architectural firms responded. A shortlist of five firms was chosen:

• Consortium of TV A2O Architecten / Atelier Kempe Thill / Marcq & Roba / BEG from Hassel, Belgium
• Vier Arquitectos from La Coruña, Spain
• Xaveer De Geyter Architects from Brussels
• Zaha Hadid Architects from London
• Rapp + Rapp from Rotterdam

The jury/board of directors finally opted for the proposal by Zaha Hadid Architects, because:

• The design preserves as much as possible of the dignity of the present building as a monument, adding a new object to the site;
• The board and its advisors had confidence in a team such as Zaha Hadid Architects being able to further develop the project so as to achieve a high quality end result that can act as a “shop window” for the Port Authority.

The estimated construction cost is 31.5 million euros excluding VAT and architect’s fees. This includes all the work for an office building with around 12,000 m² of floorspace for around 500 people, together with underground parking for 300 or so cars.

The new building fits in with the Port Authority’s future-oriented investment policy. At the same board meeting it was also decided to purchase four tugs as part of a renewal series of nine. And of course there will be further investments in infrastructure for expansion and renovation of the port. The various Flemish port authorities are currently holding discussions with the Flemish Government about financing for basic port infrastructure.
The new Port House forms part of a programme of improvements to the Port Authority’s own buildings. In addition to various renovation and new construction work that has already been carried out, a public call for tender has been issued for the new VTS (Vehicle Traffic Service) building beside the Zandvliet lock.

Design proposal

The design team from Zaha Hadid Architects proposed a very dynamic architecture that strikes up a dialogue with the Oosterweel road link, with the Lange Wapper bridge forming a backdrop to the New Port House. With its unique design, its facade architecture and its height of 46 metres, the new Port Authority will be an iconic building, visible from many different directions.

The concept is a free interpretation of a beam-shaped volume raised above the existing fire brigade building and supported on three sculptured concrete pillars housing the stairs and lifts. Two of the pillars are situated on the covered inner courtyard of the firehouse, while the third is located beside an external support point and consists of a panoramic lift shaft.
The new volume is oriented North-South parallel to the Kattendijk dock. The head of the building on the South side is a frame that looks towards the city and clearly marks the start of the port area.
The outside walls are made up of glass triangles, some transparent and some reflecting. These do not all lie in the same plane but are rotated slightly with respect to one another, creating an attractive reflecting play of incoming light in a reference to Antwerp’s diamond industry.

The present firehouse will be kept free of building all around, so that the four outside walls will be fully respected. As for the arrangement of the inside spaces, consultations will be held with Flanders Real Estate Heritage and the Monuments department of the City of Antwerp to determine whether open-plan offices (as laid down in the schedule of requirements) are possible, either partly of throughout.

The inner courtyard will be roofed over at the height of the second story so as to create an air-conditioned inside space. This central entrance hall will be considered as a semi-public space, with various enquiry desks (Personnel department, Harbourmaster’s Office, Planning Permission & Environment Permit office and Port Dues payment desk) integrated in the inside wall portals.

A sculptural, sloping roof unites an underground lobby with the covered inner court. Access to the underground car park is an important aspect of the overall concept, with the loading & unloading bays and the refuse handling facilities also located here. The car park has space for 300 or so cars and consists of a single underground level. The design of the square can be arranged so that daylight is allowed to enter. The above-ground layout forms part of a design project that is being carried out in consultation with the city departments responsible, with the main imperative being to “preserve the visual quality of the outside spaces in the Het Eilandje area.”

The open plan offices are indeed very open, so that office staff will have a great impression of space with a view along the various outside walls. The concept for the open plan office also allows for small areas in which to hold meetings, along with separate study offices.

Designer : Zaha Hadid Architects via Bustler

Text from designer :
My goal is to create more than an emergency shelter. This project is a shelter solution that meets the needs of emergency response but also provides victims with a more personal place to live; a base unit that can serve as a very basic shelter but also have the capabilities to upgrade and implement modern infrastructure. This shelter is also stackable. Many alternative housing solutions deal with small scale but can’t cope with large scale displaced populations. There are 5 points that have been the focus during the design of this shelter. The shelter must be:
1) Easily transportable, collapsible and able to be shipped flat.
2) Built of recyclable materials and have the ability to be reused.
3) Easy to erect and assembled with few or no tools.
4) Amenable to infrastructure?can be used as a basic structure, but have the capabilities to upgrade and implement modern conveniences.
5) Stackable

Über is shipped flat to allow for transport via air sea and land. All components that create the modular living unit are stored inside the shelter in its collapsed position during transport. It is then taken apart and assembled on location. When it is no longer needed, it can be dismantled, packed flat again, and moved to the next disaster area. The aim has been to design a shelter that is compatible with the current system used in refugee camps and emergencies by organizations such as the UNHCR (United Nations High Commissioner for Refugees).

Every camp is different since every situation is different. In some cases proper design of a camp is not possible because refugees have already settled on a site. Uber has been designed to adapt to different situations, terrains, and climates. Camp needs are addressed in phases. Phase one is to meet the basic needs of the people, providing them with the bare essentials.

When there is more time, funding, and personnel, phase two provides camp residents with more pleasant solutions and conveniences. For example, phase two would include building an outhouse, rather than having a defecation field or trench. This shelter is delivered in the same fashion. When the initial crisis occurs, Über is shipped as a base unit to meet the initial need for shelter. When the camp is ready for phase two, a separate upgrade package is shipped and added into the shelters units to provide conveniences (electricity for light, compact stove and refrigerator).

Designer : Rafael Smith

T.E.D. (Transportable Emergency Dwelling) is a product which takes advantage of two systems to solve a global problem. The world has an incredibly advanced transportation infrastructure which allows product to move from country to country with relative speed and efficiency. Emergency housing is needed globally so why not use that infrastructure to our advantage. To optimize the shipping of these housing units they must fit within the footprint of the most widely used shipping containers. Each housing unit is self sustaining in the correct conditions, meaning it can collect water and create energy through solar panels. One shipping container can house two families of 4 people comfortably. It can be expanded to fit more. Once these units are done being used, they may be shipped back to their origin for restoration and refurbishment for their next adventure.

Designer : Craig Mackiewicz

Capca is space-saving car to serve as an alternative to public and private city transport. Capca vehicles are environment-friendly. Their parkings are innovative, compact and attractive. They can function as recharging stations, solar energy storage batteries and oxygen generators (optionally). Its design is inspired by nature: you can observe clear outlines of petals, shells, flowers, animals and insects as well as medieval knightly armor.

Technical Features :
The electro-engines are located in the back wheels. The car glasses are made of transparent solar batteries and in addition there is a transparent monitor built into the windscreen. The car is equipped with sensors and panoramic view cameras, with navigation and auto-parking systems. It’s important that wheel-engines are shifted together when parked, that will make the back of the car smaller. There are two accumulators in the car: the first is for a chassis and the second is for electronics.

The maximum speed of the vehicle is 90 km/h, fuel distance at one battery charge is approximately 180 km, full charge time from solar batteries is approximately 10 hours under average sun activity. Vehicle dimensions: length 2230 mm, width 1590 mm, height 1530 mm. Wheel base: 1540 mm longways, 1270 mm edgewise.

Target Group :
Large city residents, large companies, recreation centers, amusement parks, universities and public offices.

Designer : Anatoly Shikhov