Designer : Hyunsoo Choi

Designer : Nissan

From the website:
LIMITED EDITION OF 24 PIECES
An exceptional mechanism created by Mathias Buttet – founder of Confrérie Horlogère – for the Only Watch 09 auction: an event that takes place every two years and is aimed at raising funds to help children affected by Duchenne muscular dystrophy.

Touched by the devastating effects of this disease, Mathias Buttet has developed a Vertical tourbillon watch which features a hand-wound mechanical movement able to make the time last longer for those who don’t have much of it. Moreover, the prototype developed has been enriched with a further function allowing users to shorten the time if they so wish.

Designer : Confrerie Horlogere

Designer : Michi Jung

Designer : Johanna Schoemaker

[Press Release]

Ancona, Italy. September 22, 2009. WHY, Wally Hermès Yachts, today unveils a revolutionary
approach to cruising in motor yachts with the presentation of a full size model of its first born, an
innovative 58 metre-long 38 metre-wide yacht, in Ancona’s shipyard.

Wally Hermès Yachts: a joint-venture.
WHY is the result of the joint-venture signed in June 2008 between Hermès and Wally, to develop a new type of motor yacht redefining the art of living on the sea. The iconic Parisian house and the iconic Monaco yacht brand formed an equal partnership whereby each company is fully involved in all aspects of the conception and design of each project. Pierre-Alexis Dumas, Artistic Director of Hermès says : “When we met, in autumn 2007, Luca Bassani Antivari, President of Wally had thought about asking Hermès to accessorise the interior of one of his boats. I was impressed by the daring of his projects. My instinct was to get on board with him and go and seek out new territories in yacht design, but I had no interest in speed.”

Luca Bassani Antivari explains: “What I’ve always liked about Hermès, aside from its intrinsic quality, is its audacity and radicalism; its desire to go beyond trends, to make no compromises and to maintain the authenticity of the house. Wally shares the same values, ‘Hermès-on-Land’, ‘Wally-on-Sea’: inevitably our paths had to cross.”

WHY 58×38
The common values of the two brands have led to a first yacht that offers an unparalleled living space at sea. WHY was developed to give life to this concept assembling a team of dedicated talents in design, engineering, and naval architecture.

Then the tried and tested Norwegian Ramform hull characterised by exceptional and unprecedented stability and volume and spotted by Luca Bassani Antivari, revealed itself as the ideal choice to be adapted to the WHY 58×38 project.

Following this unique adaptation, the decks and the interiors were developed in accordance with the fundamental credo of WHY, ‘form-equals-function’. Thus were born other innovations in the world of mega yachts: patios generously flooding the interior with natural light, photovoltaic panels on the glass hull sides, as well as on the roof opening, like Venetian blinds, a 25 metre-long forward end swimming pool, and a 36-metre aft deck beach.
WHY 58×38 offers comfort, privacy, stability, space, independence and sustainability.

Sustainability
“We are very interested in creating a yacht that will have a low environmental impact”, says Pierre-Alexis Dumas. “Its relationship with the sea must be respectful and easy. WHY intends to offer a new way of moving over water by creating an innovative way of managing and recycling its sources and uses of energy.”
“If you want to go totally ecological, it’s only sailing yacht. The reality is that today, 90 % of the market is powerboats, echoes Luca Bassani Antivari. Our aim is to reduce diesel consumption per year and per yacht: 20 to 30 % for propulsion and 40 to 50 % for generation.”

Thanks to its specific hull, WHY 58×38 requires less power at cruising speed than a boat of equal size. Its diesel-electric propulsion is the most efficient motorisation today, and the surface of the photovoltaic panels, almost 900 square metres, covers most of the boat’s auxiliary system needs.

WHY Research and Development plan to optimize this project’s energy consumption by improving the isolation of the yacht and the heat recovery of its engines, and is also investigating the latest wind energy production and wind propulsion system technologies.

In comparison to a yacht of the same size, WHY 58×38 has been conceived to reduce drastically its energy consumption, saving up to 200 tons of diesel per year.
The WHY R & D program includes tank testing for hull stability in the SSPA facilities in Sweden, and the construction of a full-scale mock-up in order to allow the design team to fine tune the living areas correctly in accordance with the hull’s unique shape.

“The WHY 58X38 yacht looks very unfamiliar but it remains on a human scale. Space is the greatest luxury on the sea, but I believe the new luxury will be the time to enjoy it”, concludes Pierre-Alexis Dumas.

Designer : Pierre-Alexis Dumas, Luca Bassani Antivari, Gabriele Pezzini, and MauroSculli

Text from Fabiano :
There are over 25 million legally registered vehicles on the UK’s roads today. Car manufacturers supply the basic tools that are required to perform the task of changing a wheel with every new car; these tools should be sufficient to complete the task successfully but is this really the case? Research suggests that people are reluctant to perform this task themselves.
Flat Tyres were the AA’s 3rd highest reason for call-out in 2005, beaten only by flat or faulty batteries and Lost keys.

Several user centered analyses were performed with volunteers who matched our key user profiles most closely. Existing products available for purchase were used. Many problems were highlighted in particular:
•  Safety, low posture is often required, particularly in removing wheel studs and jacking the car. If the flat is on the drivers sided, the task must be performed in the road as traffic passes. This posture hides the user from passing traffic and also makes it hard for the user to see the traffic approaching. This problem is increased at night.
•  Visibility of tools is poor at night. Existing tools tend to be black or grey in colour.
•  Clear instructions required, particularly for those who have never performed the task before. They serve to increase the users confidence in completing the task successfully and safely.
•  Psychological issues were also a key factor, many users remarked that they fear of failure would likely prevent them even attempting the task.

In every case we found that it was not possible to complete the task using the tools provided by the car manufacturer, a telescopic wrench was needed to increase the torque applied to the wheel studs.

The design concept behind the product changes the paradigm of how the most problematic task of changing a flat tyre is performed. The product minimizes the steps of changing a flat tyre by undoing the 4 studs of a wheel instead of undoing individually, using the motion force of the car.

• Utilizes the weight and motion of the car to release the 4studs, reducing required effort
• Does not rely on physical strength of user
• Improves road safety in reducing time spent in path of traffic

CONCLUSION

The final developed product is an innovative solution to the problems witnessed when changing a wheel. By loosening all four studs simultaneously, using the forces generated by the turning of the car wheel, the task becomes less demanding for the user while also reducing the time taken.

Designer : Fabiano Pottes

Designer : Vipin George

Passengers will have great view over the big window located at the front of the boat, stretching to the roof from the floor. The on top LED light integrated lantern will make it easy to dock the boat at night. Upper deck is surrounded by glass to provide easy controlling the boat without disturbing pillars. This gives a much better view as well while giving a more open feeling. Outside the deck, there are security rails as a part of the hull structure that elongates backwards with the wings. A thin glass is designed to rise from the hull at the front to attach the wings at the back, making the boat simple and clean.

The interior of the lower deck is separated in two different parts, one is a private section and another one is an open lounge area, allowing the passengers to rest for a while or participate in social activities as they want. The master bedroom is located in the center which is the best place to be maximum comfortable because of the stability during any directional movements of the yacht. This concept won the award from azimut, and was shown at Piazza San Carlo in Turin ITALY in a big Azimut Event.

Specs:
LENGHT OVERALL(incl.pulpit) 22.05m
HYLL LENGHT(incl.platform) 21.73m
BEAM AT MAIN SECTION 5.12m
DRAFTS(incl.props. at full load) 1.79m
DISPLACEMENT(at full load) 33.2t
ENGINES 2×1410mHP (1036kw) MAN 12V CRM
MAXIMUM SPEED(at half load) 39 knots
CRUISING SPEED( at half load) 32 knots
FUEL CAPACITY 3.300L
WATER CAPACITY 980L
CABINS 3+1 CREW
BERTHS 6+1 CREW
BUILDING MATERIAL CARBON FIBER/VTR/GPR
KEEL V-shape with angle of deadrise 15,4 degrees aft.

Designer : Anders Gloslie

Designer : Francis Gomes