Explanation from Petr:
The exhibit is an active relaxation and rehabilitation bath with special features that permit the changeability of water volume (0-410 L) and provides a pleasant form of relaxation due to its continual and smooth changes to the ergonomical shape of the structure. The bottom contour of the bath adjusts in order to conform to the required position and height of the user. The various geometrical changes to the shape enables the bath to be “shortened” for example, creating a backing for the legs in order to maximize on comfort.

For the purpose of saving on water consumption, one can simply change the depth of the bath so it becomes shallow or select a shape that is most suitable for the user. The changes to the shape of the bath floor can be modified & readjusted anytime. Another wonderful trait of the bath is that it is equally convenient for bathing children, because one can adjust a safe depth of bath, reducing risk of drowning as well as being equipped with soft finish of the base. In addition to creating minimal dimensions, the bath itself can be used as a baby changing table. Getting in and out of the bath tub is simple and effortless. There’s no need to climb over edges of the bath. This way, it is beneficial for people with physical disability or those completely immobile.

Uniquely, in this bath we can experience an unmissable feeling of soft, rippling of the bath floor during bathing or when having a massage. This is a new form of relaxation which we can daringly refer to as “kinetic therapy”. The type of technology used forms system of 10 pneumatic pistons (compressed air powering pistons) and includes inclinable segments covered with soft upholstery. This lining creates a pleasant feeling without causing pressure on the body even in the case when the bath is low filled or during the filling or draining of the bath tub. The movable segments are covered by special, highly elastic, hygienic and strong foil (used in the concept of BMW Gina. The geometric shape of the head rest can be partially changed and is also made from movable structures, covered in flexible foil. The type of material`s used are synthetic rock (e.g. ceramics, plastic shroud), glass, elastic foil.

Other systems used are classic hydro/air massaging jets capable of being rotated and powered by electric motor. The connection to mains water supply, water outlet, air and hydro massage jet is through flexible hosing. The bottom of the tub is sealed and the whole base can be raised or lowered over a flat surface of the inner side-panels of the bath. That is how water tightness is ensured.

Everything is controlled electronically with a remote control. As a result, it is possible to select filling/draining of the bath, change water temperature, adjust hydro/air massage settings (duration, intensity, cycle program) and change the shape of the bath floor whit comfortably resting in the bath tub. This is done with the help of sensor button on the display of a remote control. The geometry of the bath can be altered simply by means of accessing touch display screen on the remote control. Naturally, the program remembers previous settings and if the conditions allow, the bath immediately fulfills the command of the user. Simultaneously however, whilst making the change, the height of the water surface, its volume and temperature as well as the total water consumption is electronically monitored.

The filling of the bath is possible through water inlets positioned right beneath the head rest, whilst draining is carried out through the segment located in the middle of the bath tub. If we were to come back to the principle of shaping the bath floor, an alternative method exists, which replaces pneumatic pistons and electrically tilted segments with air pouch system (ballonet). In addition, the foil covering the surface of various segments can also be replaced with a variety of other materials available on the market, that have similar properties.

Designer : Petr Kubik

Designer : Mintpass

Text from Adam :
There are over 400,000 reported drownings and 8 – 10 times as much near drowning experiences worldwide every year. In the UK there are 500 annual drownings. These figures have remained the same for nearly 20 years which tells us that any current equipment and practice is not having the required impact to reduce these numbers.

I have been a beach lifeguard for a number of years and further primary and secondary research has shown that there are a number of key problems that reduce the survival rate of beach users.
These problems are:

• Slow response time
• Surveillance
• Lifeguard safety
• Human limitation of lifeguards

From this research it was decided to look to the future to see what could potentially be new directions for beach safety equipment, this design is therefore based for the year 2020.

The design process was in close collaboration with the BSA (British Surfing Association) headquarters in Newquay (UK). Starting with brainstorming where no idea was a bad idea, followed by concept generation and a wide variety of modeling and system/ scenario testing, the design took innovation from nature, new and existing technologies and user testing.

Explanation of final design

The ‘Mantra’ lives on the sea bed during peak seasons just off the coast of beaches; it uses small hairs on its surface to collect and store energy from tides and waves (called ‘Super Cillia Skin’). It detects distress and drowning using electro sensors coupled with sonar which even today are highly sensitive, for example heartbeats and movements can easily be monitored. When a casualty is detected it swims up to 15mph using SMAs in the wings. The victim is carefully picked up onto an inbuilt stretcher where they are carried on top the water using hydrofoils and impellers. The ‘Mantra’ is always in constant communication with lifeguards and so is met at a specific beach location by lifeguards and ambulances where an EAP is in place and the stretcher is removed without disturbing the patient, who in the worst case scenario may have neck injuries.

Stretchers are replaced and the ‘Mantra’ can assume its position at sea once more. The whole process is estimated to take under 2 minutes.

The final design as can be seen from images, uses biomimicry from a manta ray for many reasons –

• Large flat surface area for all weather stability
• Excellent turning circle and manouverability
• Excellent strength to weight ratio
• Low energy travel
• Considered as a non aggressive creature/ form

Advantages of ‘Mantra’:

• Removal of contact with bodily fluid
• Safety of lifeguards
• Immediate response time
• Completely automated
• Better for spinal and other injuries
• Aesthetics
• Function
• Sustainable

Designer : Adam Scott

Some explanation from Edwin :
The exterior desing of the car is inspired by the form of fabric blown in the wind. The form also carries traces of the historical Auto Union Type C Streamline race.

There are no conventional doors on the car, but instead, inspired by the jet fighters, there are three glass canopies. The main canopy opens forward together with the steering wheel and the dashboard; the two passengers’ canopies open backwards; and a side panel on the bodywork opens downwards to act as a step, making the event of getting in and out of the cockpit very special and easy.

The interior is simply one continuous sheet, starting from the dashboard, then being folded and bended to create floor carpet and seat.

The interior of the car is as simple and futuristic as the exterior. Single sheet transparent LCD dashboard displays all the essential data such as speed and mileage. The screen in the center of the steering wheel displays digital map. The information can also be projected on the canopy by a head up display. The
whole driving experience would be like flying a fighter jet. There is a small but handy luggage space behind the driver seat for handbags and suitcases. It is also an arm rest for the passengers.

Four wheels are housed inside the car’s four “legs”. Each wheel contains an Audi In-wheel Electric Drive Unit, making the car an evolution in Audi’s trademark “Quattro” all time four-wheel-drive system. The long range Supercharge-ion battery which powers the in-wheel motors are separated into two packs located in front of as well as behind the cockpit, creating a perfect 50:50 weight distribution of the car for excellent handling.

Specifications:
Length: 4480 mm
Width: 1900 mm
Height: 1060 mm
Wheel base; 3048 mm
Weight: 800 kg
En Engine: 4 Audi In-wheel Electric Drive Units
Power: 544 hp (4 X 100 kW)
Torque: 4500 Nm (3319.03 lb-ft)
0-100km: 2.9 s
Top Speed: 360 km/h

Designer : Edwin Conan

Text from John :
Imagine sleeping while you drive. This notion may sound insane, but it is very possible with the Saucer. The world today is growing at a very fast pace and will continue to do so, meaning that people will not have enough time for anything and sadly that includes our precious sleep-time. Just to mention a few, perhaps you often have late nights from work and are too tired to drive or you need to get to an appointment, which is hundreds of miles away, early as possible the next morning or maybe you were invited to a party, but too drunk to drive back home. This is where the Saucer comes in…

Of course, the vehicle is not designed for an alcoholic individual or to cure insomnia, rather it is designed for those with very busy lives that leave them with little or limited sleep time.

The Saucer is a self-driven vehicle with a single size bed arrangement, where the driver is no longer the driver and instead take the time to sleep as he/she travel to his/her destination. This unique vehicle is especially targeted at night-shift individuals who are a long way from home. Simply put, if you’re feeling too tired to drive, don’t leave home without it.

The interior is soundproof and is equipped with a set of programming consoles that self-drive the vehicle. Even when awake, while traveling to your destination, there is enough room for you to lay back and relax, and keep yourself busy. Perhaps reading a magazine or newspaper, or simply turning-on some entertainment. A medium-size cargo compartment is also integrated at the rear end of the vehicle where you can store up some of your gear, such as a briefcase or a suitcase. – inspired by the Alien Flying Saucer.

Designer : John Bukasa

Here’s short description about Grätzel panel :

“There’s a revolution going on in solar energy, which is about to become part of our daily lives in unexpected ways – appearing with multiple forms, richly coloured and with multiple functions. A new generation of solar cells has been born : thin, coloured, translucent and even flexible. The source of this revolution is EPFL (Ecole Polytechnique Fédérale de Lausanne), where Professor Michael Graetzel, inspired by plant photosynthesis, began to use molecules from colorants to transform the sun’s light into electricity. His work drew heavy praise from the scientific community, resulting in a World Technology Award. While many other technological developments have followed, designers need to take advantage of the extraordinary potential of these “dye-sensitized” solar cells. It will ultimately be up to them to fully explore the possibilities of this form of solar energy – to render us conscious of the significance of this major change.”

Designer : Léa Longis, Photographic credits to Véronique Huyghe.

Text from Fabiano :
There are over 25 million legally registered vehicles on the UK’s roads today. Car manufacturers supply the basic tools that are required to perform the task of changing a wheel with every new car; these tools should be sufficient to complete the task successfully but is this really the case? Research suggests that people are reluctant to perform this task themselves.
Flat Tyres were the AA’s 3rd highest reason for call-out in 2005, beaten only by flat or faulty batteries and Lost keys.

Several user centered analyses were performed with volunteers who matched our key user profiles most closely. Existing products available for purchase were used. Many problems were highlighted in particular:
•  Safety, low posture is often required, particularly in removing wheel studs and jacking the car. If the flat is on the drivers sided, the task must be performed in the road as traffic passes. This posture hides the user from passing traffic and also makes it hard for the user to see the traffic approaching. This problem is increased at night.
•  Visibility of tools is poor at night. Existing tools tend to be black or grey in colour.
•  Clear instructions required, particularly for those who have never performed the task before. They serve to increase the users confidence in completing the task successfully and safely.
•  Psychological issues were also a key factor, many users remarked that they fear of failure would likely prevent them even attempting the task.

In every case we found that it was not possible to complete the task using the tools provided by the car manufacturer, a telescopic wrench was needed to increase the torque applied to the wheel studs.

The design concept behind the product changes the paradigm of how the most problematic task of changing a flat tyre is performed. The product minimizes the steps of changing a flat tyre by undoing the 4 studs of a wheel instead of undoing individually, using the motion force of the car.

• Utilizes the weight and motion of the car to release the 4studs, reducing required effort
• Does not rely on physical strength of user
• Improves road safety in reducing time spent in path of traffic

CONCLUSION

The final developed product is an innovative solution to the problems witnessed when changing a wheel. By loosening all four studs simultaneously, using the forces generated by the turning of the car wheel, the task becomes less demanding for the user while also reducing the time taken.

Designer : Fabiano Pottes

Designer : Joey Roth

Designer : Mazda via [Jalopnik]

Tribons are designed as digital mentors, that support kid’s personal interests and show pathways to boost knowledge and development of skills. Moreover, it offers experiences and information, and make possible the understanding and participation in environments. By using Tribons, an urban child would be introduced to the natural and biological world, and similarly, a rural child can enhance their knowledge about the urban landscape. The accessories developed to comprise an earpiece that is controlled by a spontaneous 3D interface that projects various educational materials and features a safety system that allows parents track their children. Not only that, this gadget includes an additional medical module that offers surveillance of the wearer’s health parameters that will take care in case of chronic sickness and the probability of injuries.

Designer : FrogDesign