Explanation from Petr:
The exhibit is an active relaxation and rehabilitation bath with special features that permit the changeability of water volume (0-410 L) and provides a pleasant form of relaxation due to its continual and smooth changes to the ergonomical shape of the structure. The bottom contour of the bath adjusts in order to conform to the required position and height of the user. The various geometrical changes to the shape enables the bath to be “shortened” for example, creating a backing for the legs in order to maximize on comfort.

For the purpose of saving on water consumption, one can simply change the depth of the bath so it becomes shallow or select a shape that is most suitable for the user. The changes to the shape of the bath floor can be modified & readjusted anytime. Another wonderful trait of the bath is that it is equally convenient for bathing children, because one can adjust a safe depth of bath, reducing risk of drowning as well as being equipped with soft finish of the base. In addition to creating minimal dimensions, the bath itself can be used as a baby changing table. Getting in and out of the bath tub is simple and effortless. There’s no need to climb over edges of the bath. This way, it is beneficial for people with physical disability or those completely immobile.

Uniquely, in this bath we can experience an unmissable feeling of soft, rippling of the bath floor during bathing or when having a massage. This is a new form of relaxation which we can daringly refer to as “kinetic therapy”. The type of technology used forms system of 10 pneumatic pistons (compressed air powering pistons) and includes inclinable segments covered with soft upholstery. This lining creates a pleasant feeling without causing pressure on the body even in the case when the bath is low filled or during the filling or draining of the bath tub. The movable segments are covered by special, highly elastic, hygienic and strong foil (used in the concept of BMW Gina. The geometric shape of the head rest can be partially changed and is also made from movable structures, covered in flexible foil. The type of material`s used are synthetic rock (e.g. ceramics, plastic shroud), glass, elastic foil.

Other systems used are classic hydro/air massaging jets capable of being rotated and powered by electric motor. The connection to mains water supply, water outlet, air and hydro massage jet is through flexible hosing. The bottom of the tub is sealed and the whole base can be raised or lowered over a flat surface of the inner side-panels of the bath. That is how water tightness is ensured.

Everything is controlled electronically with a remote control. As a result, it is possible to select filling/draining of the bath, change water temperature, adjust hydro/air massage settings (duration, intensity, cycle program) and change the shape of the bath floor whit comfortably resting in the bath tub. This is done with the help of sensor button on the display of a remote control. The geometry of the bath can be altered simply by means of accessing touch display screen on the remote control. Naturally, the program remembers previous settings and if the conditions allow, the bath immediately fulfills the command of the user. Simultaneously however, whilst making the change, the height of the water surface, its volume and temperature as well as the total water consumption is electronically monitored.

The filling of the bath is possible through water inlets positioned right beneath the head rest, whilst draining is carried out through the segment located in the middle of the bath tub. If we were to come back to the principle of shaping the bath floor, an alternative method exists, which replaces pneumatic pistons and electrically tilted segments with air pouch system (ballonet). In addition, the foil covering the surface of various segments can also be replaced with a variety of other materials available on the market, that have similar properties.

Designer : Petr Kubik

Designer : Fima via Trendir

The speaker pair remains attached with one another and can be detached with easy twist and lift. The connecting cable contains two mini USB ports that go to both speakers, one USB 2.0 goes to the PC for charging and the 3.5mm audio output jack to the source of music, whether it is an iPod, Mac or usual MP3 players. Both the speakers have LED lights to indicate it as switched ON. The pop open Bass Xpansion System mimics the resonance of a powerful sub-woofer and enhances the style of these speakers.

Difference between these speakers and X-Mini 2nd Generation is quite clear. First one is X-Mini Max II comes in two pieces, whereas X-Mini 2nd Generation offers a single speaker only. Another remarkable difference is the volume controller is embedded with the connecting cable in X-Mini Max II, on the other hand, you can find it on the body of X-Mini 2nd Generation. Moreover, the tiny connector cable in X-Mini 2nd Generation that remains tucked with the base is absent in X-Mini Max II. And finally, the size is also an important factor about these two. Max II is larger in size, therefore, it is able to produce louder sound as well. Aside from the identical shape, there are few similarities among them too, such as both of them are using 40mm driver and features “Buddy Jack” design, allowing connecting many speakers like a chain. So, when buying one of them, you should consider the portability along with your need of greater sound.

The making of these speakers seem quite strong to me. I can feel that it is strong enough to survive minor fall in the ground or any rough surface. There are rubber soles under the base to make it slip-resistant. Overall, I think as a portable mini speaker set, the X-Mini Max II has it all.

[Buy it here]

From : X-Mini

There’s no external display unit, a projector will pop up by pressing and holding the button and focus the computer screen on the wall which can be adjusted with navigation buttons. If there is no wall around, the paper sheet holder, divides into three pieces like an umbrella just after popping up, will help to focus the desktop on a paper sheet.

The software interface of E-Ball is highly stylized with icons that can be remembered easily, and is user friendly. This compact PC will be ideal for use when working in office, making video presentations, watching large screen movies, listening music and chatting on the net.

Designer : Apostol Tnokovski

Designer : Mikhail St-Denis

The minimalist interior features control steering pod, a mimicking game like control where brake and gas paddles embedded close to the steering wheel, offering next generation driving environment. The wheels are fully immersed with rubberized tire with independent spoke arrangement that allows the wheels to absorb the road bumps without having used the suspensions. Moreover, the out of the body wheel base has added few extra with the innovative look that the car already has with its clear body shell and green house like design.

The technology aspect of Pholeum includes a composition of memory plastic body work, allowing the material to be deformed back to its original shape under application of heat from scratches and dents. These plastic can be recycled further and remolded again into the same component if the damage is irreparable. The chassis is made of durable aluminum alloy, making the vehicle strong and lightweight. Comprehensive safety for the driver has been ensured with three external airbags, designed to deploy by sensing a fast automobile within a few meters of its radius through motion sensors. Each wheel contains quad electric motors empowered with efficient next generation hydrogen fuel cell technology.

Designer : Alexei Mikhailov

Interview with Nico :

What was the inspiration for your concept?
The inspiration was the experimental approach to molecular cooking. Even after several decades of molecular cuisine, it still seems to be an exclusive game for specialists. So it became my main goal to bring some of the fantastic possibilities and ideas of molecular cooking to all ambitious cooks with an easy to use, affordable appliance.

How does your concept fit into this year’s competition theme “Designs for the next 90 years”?
I think the idea of molecular cooking is forward-looking, but the procedures and methods of preparing molecular dishes are still conventional. I would like to change this with my concept. At first, the idea of printing food seems to be something straight out of a science-fiction movie, but on second thought it is not unrealistic at all. I even think that Moléculaire could be the future kitchen tool that opens up possibilities for food-makers interested in molecular cooking.

What are the main consumer benefits of your concept?
Moléculaire is a futuristic kitchen appliance that offers several new possibilities to professional chefs as well as home users. It’s based on a layer-by-layer printing technique that arranges small particles from a set of ingredients. Within minutes, it prints out three-dimensional desserts, complex structures, shapes for molecular dishes, and patterns for decorating a meal. In addition, it’s easy to use. You simply insert a blister pack into the reservoir, place Moléculaire on top of a plate, and press the start button. Users can also create their own recipes with special software and their own ingredients. Ambitious users can download recipes and share them with other users in an online community.

Describe the consumer research behind your concept.
I conducted interviews with chefs and did a lot of research on the Internet. These approaches helped me to understand users’ interests, concerns, wishes, needs and desires. The outcome shaped my initial ideas and helped them grow. The most difficult thing about designing for the future is predicting the possible social and technological developments (their direction and speed). Therefore, it was very useful to read reports like sociological studies about cooking and future scenarios about the development of new technologies.

What kind of materials would you use to build your concept?
For my concept, I would use polycarbonate as the main material. I plan on applying this material in three different variations, each providing the right characteristics for the different parts of my design. Transparent polycarbonate can be used for the window, black tinted for the lid/display, and white for the body. The robotic printer arm and head could be made from aluminum. A blue (O)LED backlight accentuates the processes inside the printer.

Who is your favorite designer?
I don‘t have a favorite designer.

What are your career goals?
After I graduate in 2010, I want to gain more professional experience in a product-design company. In the long term, I want to further develop my conceptual and strategic skills and step into product-related design management.

Designer : Nico Kläber

Designer : Adam Schacter

Designer : Fatih Can Sarıöz

The outsider container has a series of heating panels that can be adjusted easily for a less or more intense heat as required for a particular type of food. For lower temperature cooking, tow containers are added together with the help of a clump forming a shape of a binocular. When its time to cook something in higher temperature, only one container remains functional. Rolly Cook is offering great convenience to the users with its compact shape, easily moveable and rechargeable features and will be appreciated by all range of people. This product is an ideal choice for outdoor use to enhance the enjoyment of a camping.

Designer : Jin-Young Lee