Explanation from Petr:
The exhibit is an active relaxation and rehabilitation bath with special features that permit the changeability of water volume (0-410 L) and provides a pleasant form of relaxation due to its continual and smooth changes to the ergonomical shape of the structure. The bottom contour of the bath adjusts in order to conform to the required position and height of the user. The various geometrical changes to the shape enables the bath to be “shortened” for example, creating a backing for the legs in order to maximize on comfort.

For the purpose of saving on water consumption, one can simply change the depth of the bath so it becomes shallow or select a shape that is most suitable for the user. The changes to the shape of the bath floor can be modified & readjusted anytime. Another wonderful trait of the bath is that it is equally convenient for bathing children, because one can adjust a safe depth of bath, reducing risk of drowning as well as being equipped with soft finish of the base. In addition to creating minimal dimensions, the bath itself can be used as a baby changing table. Getting in and out of the bath tub is simple and effortless. There’s no need to climb over edges of the bath. This way, it is beneficial for people with physical disability or those completely immobile.

Uniquely, in this bath we can experience an unmissable feeling of soft, rippling of the bath floor during bathing or when having a massage. This is a new form of relaxation which we can daringly refer to as “kinetic therapy”. The type of technology used forms system of 10 pneumatic pistons (compressed air powering pistons) and includes inclinable segments covered with soft upholstery. This lining creates a pleasant feeling without causing pressure on the body even in the case when the bath is low filled or during the filling or draining of the bath tub. The movable segments are covered by special, highly elastic, hygienic and strong foil (used in the concept of BMW Gina. The geometric shape of the head rest can be partially changed and is also made from movable structures, covered in flexible foil. The type of material`s used are synthetic rock (e.g. ceramics, plastic shroud), glass, elastic foil.

Other systems used are classic hydro/air massaging jets capable of being rotated and powered by electric motor. The connection to mains water supply, water outlet, air and hydro massage jet is through flexible hosing. The bottom of the tub is sealed and the whole base can be raised or lowered over a flat surface of the inner side-panels of the bath. That is how water tightness is ensured.

Everything is controlled electronically with a remote control. As a result, it is possible to select filling/draining of the bath, change water temperature, adjust hydro/air massage settings (duration, intensity, cycle program) and change the shape of the bath floor whit comfortably resting in the bath tub. This is done with the help of sensor button on the display of a remote control. The geometry of the bath can be altered simply by means of accessing touch display screen on the remote control. Naturally, the program remembers previous settings and if the conditions allow, the bath immediately fulfills the command of the user. Simultaneously however, whilst making the change, the height of the water surface, its volume and temperature as well as the total water consumption is electronically monitored.

The filling of the bath is possible through water inlets positioned right beneath the head rest, whilst draining is carried out through the segment located in the middle of the bath tub. If we were to come back to the principle of shaping the bath floor, an alternative method exists, which replaces pneumatic pistons and electrically tilted segments with air pouch system (ballonet). In addition, the foil covering the surface of various segments can also be replaced with a variety of other materials available on the market, that have similar properties.

Designer : Petr Kubik

Designer : Mintpass

Some explanation from Edwin :
The exterior desing of the car is inspired by the form of fabric blown in the wind. The form also carries traces of the historical Auto Union Type C Streamline race.

There are no conventional doors on the car, but instead, inspired by the jet fighters, there are three glass canopies. The main canopy opens forward together with the steering wheel and the dashboard; the two passengers’ canopies open backwards; and a side panel on the bodywork opens downwards to act as a step, making the event of getting in and out of the cockpit very special and easy.

The interior is simply one continuous sheet, starting from the dashboard, then being folded and bended to create floor carpet and seat.

The interior of the car is as simple and futuristic as the exterior. Single sheet transparent LCD dashboard displays all the essential data such as speed and mileage. The screen in the center of the steering wheel displays digital map. The information can also be projected on the canopy by a head up display. The
whole driving experience would be like flying a fighter jet. There is a small but handy luggage space behind the driver seat for handbags and suitcases. It is also an arm rest for the passengers.

Four wheels are housed inside the car’s four “legs”. Each wheel contains an Audi In-wheel Electric Drive Unit, making the car an evolution in Audi’s trademark “Quattro” all time four-wheel-drive system. The long range Supercharge-ion battery which powers the in-wheel motors are separated into two packs located in front of as well as behind the cockpit, creating a perfect 50:50 weight distribution of the car for excellent handling.

Specifications:
Length: 4480 mm
Width: 1900 mm
Height: 1060 mm
Wheel base; 3048 mm
Weight: 800 kg
En Engine: 4 Audi In-wheel Electric Drive Units
Power: 544 hp (4 X 100 kW)
Torque: 4500 Nm (3319.03 lb-ft)
0-100km: 2.9 s
Top Speed: 360 km/h

Designer : Edwin Conan

Text from Fabiano :
There are over 25 million legally registered vehicles on the UK’s roads today. Car manufacturers supply the basic tools that are required to perform the task of changing a wheel with every new car; these tools should be sufficient to complete the task successfully but is this really the case? Research suggests that people are reluctant to perform this task themselves.
Flat Tyres were the AA’s 3rd highest reason for call-out in 2005, beaten only by flat or faulty batteries and Lost keys.

Several user centered analyses were performed with volunteers who matched our key user profiles most closely. Existing products available for purchase were used. Many problems were highlighted in particular:
•  Safety, low posture is often required, particularly in removing wheel studs and jacking the car. If the flat is on the drivers sided, the task must be performed in the road as traffic passes. This posture hides the user from passing traffic and also makes it hard for the user to see the traffic approaching. This problem is increased at night.
•  Visibility of tools is poor at night. Existing tools tend to be black or grey in colour.
•  Clear instructions required, particularly for those who have never performed the task before. They serve to increase the users confidence in completing the task successfully and safely.
•  Psychological issues were also a key factor, many users remarked that they fear of failure would likely prevent them even attempting the task.

In every case we found that it was not possible to complete the task using the tools provided by the car manufacturer, a telescopic wrench was needed to increase the torque applied to the wheel studs.

The design concept behind the product changes the paradigm of how the most problematic task of changing a flat tyre is performed. The product minimizes the steps of changing a flat tyre by undoing the 4 studs of a wheel instead of undoing individually, using the motion force of the car.

• Utilizes the weight and motion of the car to release the 4studs, reducing required effort
• Does not rely on physical strength of user
• Improves road safety in reducing time spent in path of traffic

CONCLUSION

The final developed product is an innovative solution to the problems witnessed when changing a wheel. By loosening all four studs simultaneously, using the forces generated by the turning of the car wheel, the task becomes less demanding for the user while also reducing the time taken.

Designer : Fabiano Pottes

To enrich the alternative mobility, this vehicle is empowered with an electric engine and lithium-based batteries to accumulate the energy located under the seat and charging can be done by plugging-in any standard power socket. The uniquely forward lean main body is designed against the driving direction and the precise edges and clean surfaces add up to an important impression of the design.

Designer : Tobias Bexten

Designer : Adam Schacter

There is the solar/electric jet drive train, the body of the watercraft, the shin holsters and the thumb throttle handles. The solar/electric jet drive setup consists of four elements. These are the jet drive, the electric motor, the lithium-ion batteries and the solar panel.

Designer : Casey Reeve

[Press Release]
Honda FC Sport Design Study Suggests Hydrogen Sports Car Future

LOS ANGELES, Nov. 19, 2008 – Honda today revealed the Honda FC Sport design study model, a hydrogen-powered, three-seat sports car concept, at the 2008 Los Angeles Auto Show.

The FC Sport emphasizes the design flexibility and potential of Honda’s V Flow fuel cell technology – already deployed in the Honda FCX Clarity sedan – and reconfigures it into a lightweight sports car design with an ultra-low center of gravity, powerful electric motor performance and zero-emissions. The design study concept is inspired by supercar levels of performance through low weight and a high-performance, electrically driven fuel cell powertrain.

“The Honda FC Sport explores how to satisfy automotive performance enthusiasts in a world beyond petroleum,” said Dan Bonawitz, vice president of American Honda Motor Co., Inc. “People who love sports cars will still have a reason to love in a hydrogen-powered future.”

The high-output Honda fuel cell powertrain and a sleek, aerodynamic body contribute to the vehicle’s performance potential. A modular approach to fuel cell component packaging and the electric drivetrain contribute to the FC Sport’s low center of gravity with the majority of vehicle mass distributed between the axles, creating the balanced weight distribution sought after in sports cars.

The ideal placement of the Honda V-Flow fuel cell stack and related components demonstrates the benefits of a platform-specific, hydrogen-powered fuel cell powertrain. The FC Sport is configured to accommodate a custom-formed high-power fuel cell stack, located between the rear seats, and a battery pack placed low in the middle of the vehicle. The electric motor resides just forward of the rear axle. Two fuel storage tanks, visible from above, are located above the rear axle.

The optimal placement of fuel cell components for performance also allows for a relatively large passenger cabin by conventional supercar standards with enough space for three seating positions. The interior layout focuses primarily on the driver with a racecar-like center driving position. The enclosed canopy opens upward from the rear to allow for entry and exit. Two rear passenger seats flank the driver’s left and right side.

The sleek, low-profile body is designed to convey a high-technology appearance with sculpting that combines angular shapes in the front of the vehicle that taper into geometric, hex forms in the rear. The rear hex forms house cooling radiators for the fuel cell. Formula 1-style barge boards behind the front wheels enhance high speed aerodynamics and convey the vehicle’s racing pedigree. The hydrogen storage tanks, visible from the rear deck, showcase the FC Sports fuel cell technology in much the same way that a “naked bike” motorcycle showcases its engineering technology.

The glacier white body color conveys the FC Sport’s clean environmental aspirations while the dark wheels and deeply tinted glass provide a symbolic contrast befitting of the vehicle’s unique combination of clean power and high performance. Green construction techniques further contribute to a reduced carbon footprint. An organic, bio-structure theme is carried through to the body construction where exterior panels are intended to use plant-derived bio-plastics.

The Advanced Design Studio of Honda R&D Americas, in Pasadena, California, developed the FC Sport design study with the primary objective of using existing fuel cell technology as the basis for an ultimate Honda sports car. Designer Jason Wilbur led the design efforts.

Honda R&D Americas, Inc. began its operations in California in 1975 with local market research activities and has steadily grown its capabilities over the past 33 years to include all aspects of new vehicle design and development. Recent development efforts include trend-setting products such as the Honda Pilot, Ridgeline, Element, Civic Coupe and Civic Si.

In 2008, the company opened two new design centers in Southern California: the Acura Design Studio (Torrance), for the research and design of new Acura products; and the Advanced Design Studio (Pasadena), for the exploration and development of advanced design themes for both Honda and Acura.

The company operates 11 major R&D facilities in North America, including a full vehicle development center in Raymond, Ohio, and three design studios in Southern California. Honda R&D designers, engineers and support personnel are engaged in the development of Honda and Acura automobiles, powersports products, and power equipment for North America and global markets. The company’s main centers of operation include the Los Angeles Center (Torrance, California), responsible for market research, concept development and styling design; the Ohio Center (Raymond, Ohio), responsible for complete product development, testing, and support of North American supplier and manufacturing operations; and a dynamic test facility in Cantil, California.

NUVU: RESHAPING THE CITY

Within just a few years, cities all over the world will be at near bursting point. If mankind wants to retain the level of personal mobility it currently enjoys – and if the city is to survive – the only way forward is for a radical rethink of the type of cars driven there. One solution could be a car like Nuvu, designed for the city of the not-too-distant future.

“Nuvu is literally a ‘new view’ at the future of the city car. It is electric, of course, but as far as Nissan is concerned, for tomorrow’s city cars that is a given. No, the most important aspect of Nuvu is the interior design which provides great comfort and space in an intelligent package designed to make best use of our crowded roads and limited parking slots.”

François Bancon, General Manager, Exploratory and Advance Planning Department, Product Strategy and Product Planning Division, Nissan Motor Co., Ltd.

At a glance

- 2 +1 seating in compact 3m package
- Unique platform for Nuvu
- Zero emissions from EV drivetrain
- Drivetrain previews production EV due soon
- X-By-Wire control for all dynamic functions
- Extensive use of natural, organic and recycled materials
- An urban oasis complete with its own tree inside, which…
… provides shade for the interior, and
… generates solar energy via its ‘leaves’

Overview
There is about to be a seismic shift in the urban landscape. Within the next five to seven years, some 55 percent of the world’s population will live in the city, threatening total gridlock. Unless something is done, the irony of the phrase ‘personal mobility’ will be self-evident.

Look around at the cars in a typical city traffic jam today and the vast majority will have only one occupant and four empty seats. Some might have two occupants, a few three. But find one with four occupants or more and you’ll be doing very well.

Today, we buy a family car knowing that we’ll only ever need to use it to its full potential one or perhaps two percent of the time. Tomorrow, things will be different. Tomorrow, things have to be different.

“There is a new generation coming up who, finally, are questioning why we do the things we do. They are asking themselves, for example, why they are buying a large car when they know that for 99 percent of the time they will be in it on their own,” says François Bancon, General Manager, Exploratory and Advance Planning Department, Product Strategy and Product Planning Division, Nissan Motor Co., Ltd.

“It is our job to provide personal transportation that is better suited to people’s needs and to what the environment – in all senses – can cope with.”

Nissan’s vision for the future of urban transportation is encapsulated in Nuvu, a ‘new view’ of the type of car we will be driving in the middle of the next decade. Compact – it’s just 3 metres long – Nuvu is a concept vehicle with unique 2+1 seating. It is aimed at urban dwellers who don’t want to compromise on their personal freedom or their comfort, yet who appreciate that ‘something has to give.’

Nuvu is agile, easy to drive, even easier to park. And it is, of course, an electric vehicle (EV). As Bancon says: “We believe zero emission vehicles are one of the key solutions for tomorrow’s city car.”

Nuvu is described as a moving oasis, a haven of green tranquillity in the urban jungle. To underline this message, Nuvu incorporates a witty representation of its green credentials: across its all-glass roof are a dozen or so small solar panels. Shaped like leaves on a branch, the power they generate is fed to the battery using a ‘tree trunk’ within the car as a conduit. Nuvu also uses natural, organic and recycled materials within the cabin.

Nissan has already announced plans to introduce an all-electric car in Japan and the US in 2010 and to mass-market it globally in 2012. Nuvu is not that car, though it does share some of the technology that will feature in the planned production vehicle. Rather, it is a concept of how a Nissan EV might look in the near future.

In the longer term, Nissan foresees a future based around a line-up of zero emission vehicles regardless of their size, category and usage. Nuvu – or its production equivalent – is just one element of this emission-free future.

Nuvu in detail
The central thrust behind the development of Nuvu is not its motive power but its layout and use of space. Nuvu has been created for a city of the future, one that’s even more crowded than today.

That’s why it’s compact on the outside yet roomy on the inside. Built on a unique platform, it’s just 3 metres long and sits on a wheelbase of 1980 mm but is 1700 mm wide and 1550 mm tall to create a large and airy cabin.

Interior package
These dimensions provide all the interior room needed for the vast majority of city journeys. Nuvu has two regular seats and a third occasional chair that can be folded down when required. But, unlike some two-seater city cars currently on the market, it is a thoroughly practical proposition with an integral luggage area providing sufficient space for a typical supermarket or shopping expedition.

“It is a real car,” says Bancon. “There would be no disadvantages to using a Nuvu everyday. For the vast majority of users, three seats are more than enough most of the time.”

The packaging is designed to give priority to driver comfort with C-segment levels of space and the flexibility to invite one or two passengers on board. Cabin layout places the regular passenger seat beside but largely behind the driver’s seat, allowing the passenger to stretch right out. Ahead of this seat is a third occasional chair which, when not in use, is folded away into the dashboard assembly. But even when the third seat is in use, there remains sufficient legroom for both passengers.

In the interests of saving both weight and space, the third seat has a centre section made from hardwearing yet comfortable netting. This hammock-like approach also has the benefit of allowing cool or warm air to circulate around the occupant’s body for extra comfort.

Shopping bags, briefcases and smaller items of luggage can be stowed behind the driver’s seat while if the driver is travelling solo, larger items can be stowed in the passenger footwall.

City car research
“We did a great deal of research into how people use their cars in the city. We found that for 90 percent of the time, the driver was alone. For five percent of the time there was one passenger and for four percent of the time there were two passengers. You can do the math to find out how often four or more people were in the car!” says Bancon.

“We gave the second seat much more room than normal because when you take one passenger in your car it is usually someone you love and you want to make sure he or she is being carried in outstanding comfort,” he adds.

Natural materials
Many of the materials used inside Nuvu reflect an increasing concern for the environment. The floor is made from wood fibres pressed into laminate sheets and is studded with rubber inserts made from recycled tyres for grip.

To create a light and bright interior, the windscreen and roof merge into one extended panel running virtually the entire length of the car. But undoubtedly the most unusual feature of the interior is the ‘energy tree’ which rises from the luggage compartment floor to the roof behind the driver’s seat.

Solar panels
The energy tree is shaped like a thin trunk. As it reaches daylight it branches out under the glass roof providing occupants with protection from bright sunlight… just like a real tree. And providing a visual reminder of Nuvu’s green credentials, covering the branches are dozens of small solar panels shaped like leaves.

The panels absorb energy from the sun which is then fed back down the energy tree and used to help recharge the battery and provide an extra power boost for the electric motor. As well as being genuinely green energy, it is estimated that the power generated via the solar panels will save the equivalent of one full overnight charge from mains electricity each month.

Driver controls are as simple as possible. All the major functions – steering, braking, transmission and throttle – are ‘By-Wire’ while the steering is controlled by an aircraft-style steering yoke: with just one turn from lock to lock, the steering is very direct for agility and manoeuvrability in the city. Nuvu’s turning circle is just 3.7 metres. Thanks to its wide track and the use of 16 inch 165/55 tyres mounted on lightweight, almost transparent, wheels, ride comfort, stability and agility is of the highest order.

There are two pedals – for stop and go – stalks for minor controls and a digital instrument panel with dials for speed, distance covered and battery range. The instrument panel itself is formed of layers – rather like an onion – and like the energy tree is another example of design inspired by nature. “We call it bio-mimicry,” says Bancon.

Rear view/parking monitor
Two screens on the dashboard display the view behind the car – there are no door mirrors to disturb the airflow, but small cameras – and double as monitors for the Around View Camera which give a bird’s eye view of the car when manoeuvering or parking.

Saving energy was the guiding force behind the use of low-energy LED head and tail lamps, while Nuvu’s heating and ventilation system filters and cleans the city air as it passes through the vehicle. Not only does it produce no emissions at source, but Nuvu actually helps clean up the city environment.

Exterior and interior design
“Nuvu’s design is further clear evidence of Nissan’s continued desire to challenge convention and to explore all the possibilities that the EV could bring us. In many ways it was inspired by our two most extreme EVs of recent times: Mixim and Pivo 2.

“Significantly, though, Nuvu delivers a more realistic interpretation of two of the most important aspects of its forerunners – the ‘Friendly Innovation’ found in Pivo 2 and the ‘Sports Dynamics’ central to Mixim

“The result? We have designed a radical concept car that with just a few changes could go into production tomorrow,” explains Masato Inoue, Chief Designer, Product Design Department, Nissan Motor Co., Ltd.

Developed by designers at Creative Box Inc. – Nissan’s design think-tank – Nuvu’s green house has flowing lines with gentle curves inspired by nature. The distinctive shape of the door glass on either side gives the impression of a hot air balloon that’s being gently inflated by pressure from within, while tropical fish inspired the profile of the side window graphics as a whole.

This contrast between the natural, fluid shape of the greenhouse and the strength implied by the solidity of the lower body gives Nuvu a feeling of quality rarely found in a compact car.

Colour and materials
Nuvu’s visual impact is further enhanced by its unique body colour. Developed by Nissan Design, the shade is officially called Soft Feel Sandy Gold.

Matching the ecological values of an electric vehicle, the moulded plastics and synthetic elements found inside a typical production car have been replaced by natural materials and organic alternatives, such as the wood fibres and rubber from car tyres used for the flooring. The result helps create a relaxed, warm atmosphere within Nuvu’s cabin.

During the design development stage, key targets were to develop an EV that encompassed obvious modernity with engaging ambience and a playful aspect – hence the energy tree. “You don’t need to be a car lover to fall in love with Nuvu,” adds Bancon.

EV drivetrain
Nuvu is more than a styling concept of a future EV. It is a fully working mobile test bed for much of the technology that will be used in Nissan’s production EV to be launched in 2010. For this reason elements of its technical specification are being kept secret for the time being.

The electric motor used in Nuvu is mounted at the rear of the vehicle and drives the back wheels, though neither its exact specification nor the power and torque figures are being released at this stage. A driving range of 125 kms and top speed of 120 km/h are being made public, however.

Li-Ion battery
Similarly although it can be revealed that the batteries used are of the latest laminated lithium-ion type and have a capacity of 140 Wh/kg (watt-hours per kilogram), the total capacity of the batteries and number of modules are not being disclosed at this stage.

Nissan began research into high output Li-Ion cells as long ago as 1992, but today development is carried out by Automotive Energy Supply Corp. (AESC), a joint venture company set up by Nissan and NEC Group.

Unlike a conventional lithium-ion battery with its bulky cylindrical cells, the laminated Li-Ion battery as used in Nuvu has thin laminated cells and fewer components overall. This boosts its power by a factor of 1.5 at the same time as halving its physical size. It also remains twice as efficient as a conventional cylindrical Li-Ion battery even after five years or 100,000 kms of continuous usage.

Another bonus of the compact cell construction is that a thin modular design is possible with a commensurate improvement in battery cooling efficiency. Higher power outputs are achieved through material improvements made to its lithium manganate positive electrode and carbon negative electrode. The use of chemically stable spinal-structured manganese for the positive electrode also helps ensure safe operation.

Its compact size allows the batteries to be mounted under the seats and the vehicle’s flat floor, thus helping to keep the centre of gravity as low as possible.

A quick charge from empty to full should take between 10 to 20 minutes while a full charge should take between three to four hours from a domestic 220V socket.

Typical users
“The people who will be drawn to a car like Nuvu are many and varied,” says Bancon. “It is a cross generational car and not a signature vehicle for one generation.

“There will be common threads, however. They will be early adopters but more importantly they regard themselves as urban citizens. They don’t just work or live in the city; they are part of the city. They want a car that somehow expresses who they are and which reflects their personal ideology.”

Conclusion
Although clearly a concept vehicle exploring aspects of future vehicle design, Nuvu nevertheless embodies many messages for today. Its clever interior provides ample headroom, legroom and comfort for most everyday needs without occupying more road space than it needs.

The use of recycled and natural materials underlines Nuvu’s environmental message and while the energy tree might be considered as a piece of whimsy, the use of solar energy is an entirely sensible and practical technological solution to aid an emission free future.

“Nuvu is a concept car, for sure, but it is an entirely credible vehicle,” says Bancon. “It is light, clean and easy to drive. It is practical and a sensible size, yet it is also embodies an element of fun: the future doesn’t look so bad, after all.”

Designer : Nissan

Press Release :
The MINI brand is continuing its overwhelming story of success – now taking a new approach with the MINI Crossover Concept.

This Design Study offers a fascinating outlook at a new facet of the brand powerfully expressed by a truly innovative body concept – the fourth body variant, to be precise, following the classic two-door, the MINI Convertible, and the MINI Clubman.

The MINI Crossover Concept is a new model variant for the first time measuring more than four metres in length, with four drive wheels, four doors and four single seats. These features alone place the new car right in the line of vision of new target groups seeking to combine the individual style of the brand with enhanced versatility within the interior and innovative functionality throughout.

A universal, multifunction fastening rail, the MINI Center Rail, extending between the seats on the centre console of the MINI Crossover Concept, offers not only offers unconventional storage options, but also provides a consistent link between the front row of seats and the rear.

A further highlight within the MINI interior is the innovative central instrument in three-dimensional finish, the MINI Centre Globe.

This combined control and display unit formed as a globe featured for the first time in an automobile worldwide sets new standards for the integrated control of entertainment, communication, navigation, and vehicle functions.

The MINI Crossover reflects not only the potential of the MINI model family in growing further and further to new dimensions, but also the innovative power of MINI’s designers. In this case, the outlook at an additional MINI concept is enriched by a wide range of visions expressing a unique driving experience and way of life only a MINI is able to evoke.

All innovations presented in the MINI Crossover Concept are conceived to expand that characteristic MINI feeling by yet another new dimension.

The innovative character of the new car comprises its body design as well as the drivetrain, the interior and the control concept. Indeed, offering options and versatility of this kind, the MINI Crossover Concept opens up new dimensions in mobility also beyond urban life.

All-wheel drive – the foundation for a new MINI feeling. A new MINI offers more – and does so in unique style every time.

The MINI Crossover Concept clearly expresses this principle, its all-wheel drive serving to give the new model an even wider range of practical use in new areas and a new experience on routes already driven. But in doing so the MINI Crossover Concept is not limited to the usual status of a conventional all-wheeler. Rather, to offer its additional mobility potential even more consistently, the Concept Car comes with numerous design features making it an all-round talent for a unique experience in everyday life, for enjoying leisure time to the utmost, for adventure travels of all kinds and for travel planning. Hence, the MINI Crossover Concept looks at new objectives and, at the same time, new target groups.

Four metres in length – more calibre, more options.

As a consistent enhancement of the MINI model family, the MINI Crossover Concept offers new calibre and new format in every respect. This is the first MINI to measure more than four metres in length. And measuring 1,830 millimetres/72.0″ in width as well as 1,598 millimetres/62.9″ in height, the MINI Crossover Concept goes beyond the existing production models from MINI also in this respect. Wheelbase, finally, is 2,606 millimetres/102.6″, again ensuring an even more powerful stance on the road.

These exterior dimensions of the Concept Car are a clear symbol of the quest for additional options in driving the car and in the new, enhanced driving experience.

The MINI Crossover Concept offers extra space and mobility at the rear as well as a capacity to transport never seen before in a MINI. Added to all this, there is enhanced flexibility in splitting up the interior space, catering for all individual wishes and demands.

Combining its unique design with outstanding agility by no means restricted to the beaten track alone, the MINI Crossover Concept holds a unique position within the MINI segment. At the same time it clearly stands out as a member of the MINI model family through the appropriate re-interpretation of design elements typical of the brand. The MINI Crossover Concept thus symbolises the breakthrough into a new category of vehicles, broadening the appeal of the brand to an even larger target group.

Four doors – new diversity through asymmetric arrangement.

With two doors on each side of the car, the MINI Crossover Concept offers particularly comfortable access to the rear. Here again, therefore, the new model enhances the options and qualities offered so far by the existing body concepts of the MINI.

But even this is not all: The MINI Crossover Concept is not a four-door in the classic sense, as is clearly expressed by the asymmetric arrangement of the doors in the Design Study. A conventional arrangement of doors is to be found only on the front passenger’s side, while on the driver’s side the MINI Crossover Concept comes with a conventional door for the first row of seats plus a lift/sliding door moving along the outside for convenient access to the rear and for loading the car from the side. And by dropping the B-pillar on the driver’s side, the MINI Crossover Concept exhausts the potential of this generous opening to an even higher degree. Frameless side windows, finally, are yet another feature of this truly exceptional four-door.

The rear door swivelling to one side, together with its frameless and retractable rear window, likewise offers an even higher standard of practical use and most convenient loading conditions. Thanks to the large opening and the low loading sill, sports equipment and other, even bulkier objects can be loaded conveniently into the luggage space offering even larger capacity when required by lowering the individually folding rear seats completely into the floor of the car with the help of a parallelogram kinematic mechanism.

Storage capacities may then be increased even further by a transport case fitted outside on the rear door. And last but certainly not least, the roof rail system available on the MINI Crossover Concept is simply ideal for fitting ski, snowboard and bicycle carriers as well as transport boxes of all sizes.

The roof structure of the MINI Crossover Concept offers further options in enhancing everyday driving qualities and leisure-time enjoyment. As a folding roof cover extending throughout the entire length of the roof, the roof structure may be opened both from the front and from the rear, letting either fresh air or warm sunshine into the car – or both, depending on the driver’s and passengers’ wishes.

The opening at the rear also serves to accommodate extremely long objects transported in the car, ranging from a surfboard all the way to cross-country skis. So even in this case, transporting anything the driver wishes to take along is easy and convenient.

Four single seats – for maximum comfort inside the MINI.

The MINI Crossover Concept stands out not only as an unconventional, but rather as a truly exceptional four-seater. The single seats at the rear, to mention perhaps the most significant highlight, come in the same contours as the driver’s and front passenger’s seats and are adjustable by 13 centimetres or 5.1″ fore-and-aft. So depending on individual requirements, the rear seats offer either lounge-like legroom or additional storage capacity in the rear compartment.

The MINI Center Globe – a new vision of the central instrument of the future.

Featuring their round Central Display right in the middle of the dashboard, the current MINIs already boast an interior design feature quite unique and unmistakable in its look. Indeed, this multi-function display serves to conveniently control all major entertainment, telecommunication and navigation functions, providing the speedometer function around its outer circumference.

Now the MINI Crossover Concept introduces the consistent enhancement of this display and control concept: the MINI Center Globe. For the first time, therefore, the central display and control unit is designed in this Concept Study as a globe. This three-dimensional layout allows even more consistent integration of functions and the appropriate presentation of information and entertainment options. In addition to the vertical and horizontal display features currently available, the new instrument adds a further, three-dimensional element with displays stratified on various levels and highlighted to a greater or lesser degree, depending on the driver’s and front passenger’s requirements. The current speed of the car, finally, is shown as before in typical MINI style on the display round the edge.

To clearly, flexibly and legibly present all information at all times, the MINI Center Globe comes with ultra-modern laser projection technology. With its unique optical features, the laser projector allows simultaneous presentation of pictures on various levels, with a varying focus and in powerful colours.

Benefiting from this technology never seen before in an automobile worldwide, the MINI Crossover Concept is also able to optically separate the MINI Centre Globe into two hemispheres. These adjustable, moving hemispheres then enable the driver and front passenger to present and view different pictures recognisable only from their individual perspective. In other words, the front passenger may for example surf the net while the driver maintains his free view of all displays and instruments.

To provide this special effect, the hemisphere facing the front passenger closes down from the other side and acts as a projection surface presenting the pictures required.

The MINI Centere Globe presented in this Design Study already shows today what options are conceivable in terms of navigation, communication and entertainment in the car of the future, using innovative technologies of this outstanding calibre.

The driver and/or front passenger operate the MINI Centre Globe by a touch-sensitive surface, a trackball on the steering wheel, buttons and slide controls in the lower section of the MINI Centre Globe, and a keyboard on the front passenger’s side extending at the touch of a button from the dashboard.

Such versatile and flexible use of the MINI Center Globe gives this new control unit the character of an innovative travel companion adjusting at all times to the individual wishes of the driver and front passenger and helping them enjoy mobility in a new dimension wherever they go.

The MINI Centre Globe is additionally linked to the starter system for the engine. Instead of a conventional key, the driver uses a start/stop unit referred to as the Keyball.

To start the car, all the driver has to do is insert the Keyball on the MINI Crossover into the appropriate opening in the upper edge of the MINI Centre Globe. The Keyball then rolling towards the driver along the middle of the MINI Centre Globe. In this position the driver is able to press the Keyball in order to start the engine. Pressing the Keyball again, in turn, he switches off the engine and the Keyball rolls down into its housing bay from where the driver can conveniently remove the ball.

The MINI Centre Rail – a perfect connection bringing the MINI team front and rear together.

Instead of a conventional centre consol, the MINI Crossover Concept comes with a fastening rail referred to as the MINI Centre Rail and extending from the dashboard all the way to the tailgate of the car. This is indeed the connecting unit between the front and the rear seats.

Holders for entertainment and telecommunication devices, cupholders, storage units and boxes may be conveniently attached to this rail and subsequently pushed forward or backward along the entire length of the car.

A special fastening system developed specifically for MINI serves to attach individual items to the Centre Rail, for example an external music player and other devices, storage boxes and holders for sunglasses, gloves, tickets for parking, coins, writing utensils or a travel guide, as well as all other kinds of holders and supports.

An armrest with an integrated storage box, to mention another example, may be attached both at the front and at the rear.

The Centre Rail also facilitates the common use of storage boxes and devices and makes it much easier to pass on food and drinks to the rear-seat passengers while driving.

In the MINI Crossover Concept this pleasure of enjoying all the benefits of motoring together is symbolised by a special collection of dishes and cups made of unique porcelain created specifically for the new Concept Car.

Four sophisticated materials for a truly exclusive ambience.

Such use of top-quality porcelain highlights the exclusive lifestyle character borne out in the MINI Crossover Concept also in conjunction with three further, particularly exclusive materials in the interior: Around the instrument panel genuine wood trim extends across the entire width of the car. The armrests on the doors and the inlays in the footwells, in turn, are made of massive lime wood. Inlays made of specially hardened, lagoon-blue glass, in turn, highlight the door linings as well as the surrounds on the air vents.

Like the door closing handles on the front passenger’s side, the MINI Centre Rail is made of massive, matt-polished aluminium. Looking at the appropriate colours for the interior, in turn, the designers opted for natural, authentic shades, the Dark Green leather on the driver’s seat standing out clearly from the Coffee Brown leather on the other seats. The remaining cloth surfaces are finished in Light Grey and Light Brown, with a soft rubber cover adorned by wood inlays in the footwells.