Designer : DS Design

Designer : DR Hussien Al Jammazi

Designer : Michael Young

Designer : Philippe Starck

Victor says about Mytho :

The MYtho, is a concept car designed to be simple, but at the same time sophisticated. With inspiration from vintage cars, like the woodies, i was able to find a sustainable design solution for the side panels, which are made of compressed wood also the whole body is made of aluminum, in order to be recyclable.

The “tech” factor is in it’s OLED displays, build-in solar cells, and HUD display’s for the driver.

The form of the car is very simple, like the hot rods from the 30’s. The open wheel design, the huge front grill, and the low profile of the car, are just some indicators of this.

Designer : Victor Uribe Chacon

The minimalist interior features control steering pod, a mimicking game like control where brake and gas paddles embedded close to the steering wheel, offering next generation driving environment. The wheels are fully immersed with rubberized tire with independent spoke arrangement that allows the wheels to absorb the road bumps without having used the suspensions. Moreover, the out of the body wheel base has added few extra with the innovative look that the car already has with its clear body shell and green house like design.

The technology aspect of Pholeum includes a composition of memory plastic body work, allowing the material to be deformed back to its original shape under application of heat from scratches and dents. These plastic can be recycled further and remolded again into the same component if the damage is irreparable. The chassis is made of durable aluminum alloy, making the vehicle strong and lightweight. Comprehensive safety for the driver has been ensured with three external airbags, designed to deploy by sensing a fast automobile within a few meters of its radius through motion sensors. Each wheel contains quad electric motors empowered with efficient next generation hydrogen fuel cell technology.

Designer : Alexei Mikhailov

Text from Teknokat Marine:
tubiQ is a modular concept that combines the dynamics and elegance of a boat with a refined living area on at least two levels. A tubiQ is made up of various interchangeable modules which can be fitted and connected to each other in many different ways. Within limits the tubiQ can be designed in full by the customer (length, height, interior design and the number and sizes of the rooms).

tubiQ: design your floating life!
On demand the tubiQ can be equipped with state of the art electric engines and solar panels. This, combined with a water system that represents the finest level of liquid filtration, makes the tubiQ totally self supporting. tubiQ makes it possible to $enjoy your floating life anywhere you wish.

tubiQ is designed by Marcello Ligabue with Daniele Gibertoni, produced by Teknokat Marine S.r.l. and will be on sale from autumn 2009 in two basic versions: tubiQ48 (one deck) and the tubiQ59 (two decks). The tubiQs can be delivered fully furnished or casco with a price that varies from 240.000 € to 590.000 € ex VAT.

For more information about tubiQ here : http://www.tubiq.eu

Designer : Marcello Ligabue and Daniele Gibertoni

This proposal is focused around providing an alternative view of what the future of the Taxi might be. The vehicle is designed around the user and this is reflected in the safety of ingress/egress, the passenger/driver compartment split and features for ease of use by passengers. Features include, split for driver safety when used as night rider, GPS and mapping system for driver and passenger, passenger entertainment/info hub, Smart card system, disability access and focus on curb side access only. Technological features include the hydrogen fuel cell, battery generators, solar panel system and recharging hubs.

The overall aesthetic of the vehicle is influenced by the Australian environment; space, relaxed ambience, unique identity, comfort, security, and a ‘can do’ attitude. These unique characteristics immediately identify the vehicle as special purpose and also set it apart from other vehicles on the road. The curb-side DLO captures the essence of the Taxi in that it is inviting passengers inside for an experience.

The footprint is emphasized by the wheels being in the outermost corners of the vehicle which allows for greater volume and also a very level and balanced stance. The roof features an acrylic opening area to allow for a greater sense of space while also allowing a great vantage point for passengers. The solar panel is also cleverly housed on the roof to harness the most energy from beating Australian sun.

Curb side access only for passenger ingress / egress safety. All doors use a slider system for minimizing the overall footprint of the vehicle whilst it is in operation. Access for wheel-chair bound passengers is catered for by providing a platform that extends to the curbside to allow access. All rear compartment seats tuck away to open-up maximum floor room for wheelchair access. Rear trunk also operates on a slider system.

The rear compartment is split-up to allow for better communication for the rear occupants. Rear seats fold away to allow access and floor clearance for wheelchair access. Heads-up display on split window for accessing features such as map, places of interest, fares and also for advertising. Driver to passenger split is driven by – safety and privacy. The split ensures security of the drivers whilst also providing a more private booth-type environment for passengers. Doors split open at the centre to allow for maximum operating opening distance.

Polycarbonate is used throughout the vehicle due to its impact resistance, relative lightweight, optical qualities and high temp resistance. The chassis comprises of aluminum to minimize weight.

Curb-side access only for passenger safety, bright orange livery for visual impact, safety-cell for passengers and driver all contribute to overall safety. Optimized seating configuration allows greater interaction, comfort and ease of use – especially the fold away seats for wheelchair access.

Hydrogen fuel cell technology coupled with electric generators / batteries propel the vehicle. The solar panel is used to harness extra energy as well as the recharging hubs when the vehicle is used to pick up passengers.

Designer : Damian Lucaciu

Interview with Nico :

What was the inspiration for your concept?
The inspiration was the experimental approach to molecular cooking. Even after several decades of molecular cuisine, it still seems to be an exclusive game for specialists. So it became my main goal to bring some of the fantastic possibilities and ideas of molecular cooking to all ambitious cooks with an easy to use, affordable appliance.

How does your concept fit into this year’s competition theme “Designs for the next 90 years”?
I think the idea of molecular cooking is forward-looking, but the procedures and methods of preparing molecular dishes are still conventional. I would like to change this with my concept. At first, the idea of printing food seems to be something straight out of a science-fiction movie, but on second thought it is not unrealistic at all. I even think that Moléculaire could be the future kitchen tool that opens up possibilities for food-makers interested in molecular cooking.

What are the main consumer benefits of your concept?
Moléculaire is a futuristic kitchen appliance that offers several new possibilities to professional chefs as well as home users. It’s based on a layer-by-layer printing technique that arranges small particles from a set of ingredients. Within minutes, it prints out three-dimensional desserts, complex structures, shapes for molecular dishes, and patterns for decorating a meal. In addition, it’s easy to use. You simply insert a blister pack into the reservoir, place Moléculaire on top of a plate, and press the start button. Users can also create their own recipes with special software and their own ingredients. Ambitious users can download recipes and share them with other users in an online community.

Describe the consumer research behind your concept.
I conducted interviews with chefs and did a lot of research on the Internet. These approaches helped me to understand users’ interests, concerns, wishes, needs and desires. The outcome shaped my initial ideas and helped them grow. The most difficult thing about designing for the future is predicting the possible social and technological developments (their direction and speed). Therefore, it was very useful to read reports like sociological studies about cooking and future scenarios about the development of new technologies.

What kind of materials would you use to build your concept?
For my concept, I would use polycarbonate as the main material. I plan on applying this material in three different variations, each providing the right characteristics for the different parts of my design. Transparent polycarbonate can be used for the window, black tinted for the lid/display, and white for the body. The robotic printer arm and head could be made from aluminum. A blue (O)LED backlight accentuates the processes inside the printer.

Who is your favorite designer?
I don‘t have a favorite designer.

What are your career goals?
After I graduate in 2010, I want to gain more professional experience in a product-design company. In the long term, I want to further develop my conceptual and strategic skills and step into product-related design management.

Designer : Nico Kläber

Designer : Louis Filosa