Key features of the Cosmic Trac include single sheet hood, safety head lamp, FRP head lights, serviceability, cost affectivity, etc. The head lamp cluster is designed in a housed way, ensuring complete safety for the lights unlike traditional projecting head lamp that always tend to break easily. The exposed engine parts and projected grill gives hi-tech feel which helps for the strength and aggression of the tractor. The fender is covered partly aiming complete driver’s safety. The dark grey and shiny blue color scheme has improved the visual impact of the tractor as a functional futuristic farming vehicle instead of making it a not acceptable tool for the target future farmers.

Designer : Vipin George

Text from designers :
The idea is to make an amphibious vehicle that can be used on land, ice and on water. Inside each wheel is an electric engine, which has energy from batteries. To realize these points the vehicle needs to be adaptable to the environment and use. This problem is solved by a specially designed tire.

Intelligent wheel system
The wheel exists of movable parts which can increase traction or even transform in a paddle wheel to propel the vehicle in the water. The wheel is controlled by terrain sensors which decide when more or less traction is needed. This system provides the vehicle with more safety because it can answer to different kind of terrains.

Renting concept
When making a vehicle that can do almost anything it will be certain it is going to cost a lot of money. For students to be able to afford it, there could be a renting system. For example for 5 euros a day the tourists and students could rent the vehicle. Cheap price could be achieved by sticker advertising.

Designer : Janne Leppänen, Tuulia Miettinen, Roope Kolu, Tiemen Stelwagen, and Jaap Van Der Voort

Designer : Daniel Bailey

Designer : David Vega

This concept has been driven from the need for zero-pollution, efficient and affordable cars for the future community and enjoying the freedom of a ride. The ATNMBL is designed as a self-driving car with artificial intelligence which arrive to you with just a phone call. The standing-height entrance has an electric sliding glass door and upon entering, you will be asked for your desired destination. The comprehensive and innovative voice recognition system of this vehicle along with a touch screen remote and slide up display, it can offer a wide range of tour planning, detailed performance setting and enjoyable ride sharing.

The overall arrangement of the interior of ATNMBL is very much familiar with conventional living room sitting including side chair, a couch and a low table. Up to seven passengers can sit towards each other and can see outside through large floor-to-ceiling windows on both sides. From outside, this vehicle looks like micro-architecture with a large window, pitched room and asymmetrical shape from every view without any reference to past automobile designs.

A considerable amount of typical car space is blocked with the engine and drive train, while, the mechanical components of ATNMBL are simplified and densely packed, providing more interior space. Each wheel contains electric motors which provide all-wheel drive. The power storing mechanism is located beneath the floor; moreover, alternative solar energy can be obtained from the roof-top solar panels. The front and rear end contains an array of tail lights, headlights and sensors.

Designer : Mike and Maaike via Core77

Designer : Jeongche Yoon

Designer : Kazim Doku

Desired outcome
Eliminate or dramatically reduce transportation devices contribution to carbon emission. Be able to cut down vehicle footprint and the number of vehicles operating on the road at any one time. Provide a sound and friendly module transportation system that are used by the public on a daily bases even for people without the Aventos vehicle.

Ease the finance pressure on small and medium sized businesses by providing an adaptive transportation device for their daily needs.

Assist the younger generation in adapting to the neo-nomadic lifestyle because the vehicle can assist in independent moving operations without the need of external assistance. Provide a fresh, young and eco friendly image for medium sized city commercial vehicles to the general public.

Designer : Timothy Choi

[Press Release]
The future headquarters of Antwerp Port Authority will be designed by the London firm of Zaha Hadid Architects. The choice of architect was made at the Port Authority board meeting on 13 January. The new Port House will occupy the site of the technical services building on quay 63.

The Port Authority aims to make its operations more efficient by centralising the administrative and technical services which are now divided between the Port House and quay 63. The new headquarters will also solve the pressing shortage of workspace in the present Port House on the Entrepot quay. Some 500 people will be able to move into the new building when it is completed in 2013.

In addition to offering better accommodation, the future Port House will contribute to further development and upgrading of the part of the city known as Het Eilandje. The brief for the new building specified that it had to symbolise the Port of Antwerp as a world port and economic driver of Flanders and the Antwerp area. It also had to be built according to the principles of sustainability.

In selecting the architect it was decided to use the Open Call for Tender procedure of the Flemish Government Architect’s team. The procedure was launched in December 2007, and nearly 100 architectural firms responded. A shortlist of five firms was chosen:

• Consortium of TV A2O Architecten / Atelier Kempe Thill / Marcq & Roba / BEG from Hassel, Belgium
• Vier Arquitectos from La Coruña, Spain
• Xaveer De Geyter Architects from Brussels
• Zaha Hadid Architects from London
• Rapp + Rapp from Rotterdam

The jury/board of directors finally opted for the proposal by Zaha Hadid Architects, because:

• The design preserves as much as possible of the dignity of the present building as a monument, adding a new object to the site;
• The board and its advisors had confidence in a team such as Zaha Hadid Architects being able to further develop the project so as to achieve a high quality end result that can act as a “shop window” for the Port Authority.

The estimated construction cost is 31.5 million euros excluding VAT and architect’s fees. This includes all the work for an office building with around 12,000 m² of floorspace for around 500 people, together with underground parking for 300 or so cars.

The new building fits in with the Port Authority’s future-oriented investment policy. At the same board meeting it was also decided to purchase four tugs as part of a renewal series of nine. And of course there will be further investments in infrastructure for expansion and renovation of the port. The various Flemish port authorities are currently holding discussions with the Flemish Government about financing for basic port infrastructure.
The new Port House forms part of a programme of improvements to the Port Authority’s own buildings. In addition to various renovation and new construction work that has already been carried out, a public call for tender has been issued for the new VTS (Vehicle Traffic Service) building beside the Zandvliet lock.

Design proposal

The design team from Zaha Hadid Architects proposed a very dynamic architecture that strikes up a dialogue with the Oosterweel road link, with the Lange Wapper bridge forming a backdrop to the New Port House. With its unique design, its facade architecture and its height of 46 metres, the new Port Authority will be an iconic building, visible from many different directions.

The concept is a free interpretation of a beam-shaped volume raised above the existing fire brigade building and supported on three sculptured concrete pillars housing the stairs and lifts. Two of the pillars are situated on the covered inner courtyard of the firehouse, while the third is located beside an external support point and consists of a panoramic lift shaft.
The new volume is oriented North-South parallel to the Kattendijk dock. The head of the building on the South side is a frame that looks towards the city and clearly marks the start of the port area.
The outside walls are made up of glass triangles, some transparent and some reflecting. These do not all lie in the same plane but are rotated slightly with respect to one another, creating an attractive reflecting play of incoming light in a reference to Antwerp’s diamond industry.

The present firehouse will be kept free of building all around, so that the four outside walls will be fully respected. As for the arrangement of the inside spaces, consultations will be held with Flanders Real Estate Heritage and the Monuments department of the City of Antwerp to determine whether open-plan offices (as laid down in the schedule of requirements) are possible, either partly of throughout.

The inner courtyard will be roofed over at the height of the second story so as to create an air-conditioned inside space. This central entrance hall will be considered as a semi-public space, with various enquiry desks (Personnel department, Harbourmaster’s Office, Planning Permission & Environment Permit office and Port Dues payment desk) integrated in the inside wall portals.

A sculptural, sloping roof unites an underground lobby with the covered inner court. Access to the underground car park is an important aspect of the overall concept, with the loading & unloading bays and the refuse handling facilities also located here. The car park has space for 300 or so cars and consists of a single underground level. The design of the square can be arranged so that daylight is allowed to enter. The above-ground layout forms part of a design project that is being carried out in consultation with the city departments responsible, with the main imperative being to “preserve the visual quality of the outside spaces in the Het Eilandje area.”

The open plan offices are indeed very open, so that office staff will have a great impression of space with a view along the various outside walls. The concept for the open plan office also allows for small areas in which to hold meetings, along with separate study offices.

Designer : Zaha Hadid Architects via Bustler

Text from David:
Transportation is a key factor in our urban environments and most of our cities are now developed to match the scale and needs of cars, and car users. This reality raises issues regarding sustainability and environment, energy consumption and quality of life.

So, “How can public and personal transports be redefined in a sustainable way, delivering a sense of personal space and independence to its users?” This was the title of my Master of Science in Design and Transport Thesis, concluded in Coventry University, UK, with Distinction, in September 2008.

In other words, the aim of this project was to develop guidelines and a holistic solution for a new system of urban transport, composed of vehicle and infrastructure, in a sustainable way and adaptable to various urban environments.

To develop the project I needed information about: user’s behaviors and explanations for them; main trends; analysis of existing solutions and identification of their problems; definition of applicable technologies in a sustainable manner in a near future. This information was gathered through an online questionnaire, statistical data from several sources, literary research, internet articles, pictures, video and expert interviews and then compiled in my final report.

Preliminary research indicated that several attempts to tackle the issue of mass transportation are being tested and implemented throughout the biggest cities on Earth. Several solutions exist already, but people always seem to give preference to a personal vehicle of some kind to move, commute or make quick trips. Only when there is no other choice, people seem to engage in public transportation. Personal transport is the preferred mode of use and this is a trend that keeps increasing.

The conclusion of the thesis report was composed of guidelines and design specifications that served as basis for the development of a new type of transportation that is truly sustainable and that meets people’s requirements. This generic solution was exemplified through a typical design project that will act as future reference and that goes by the name of “SCARAB”.

PROJECT DESCRIPTION:
VEHICLE:
- The vehicle allows users to have freedom of use much like a motorcycle but with the convenience of having an enclosed private space and luggage compartments.
- The vehicle can be operated in several different positions depending on speed. It is parked vertically for easy ingress and egress and optimization of public space. When in speed position, the vehicle also tilts when curving or changing direction.
- When circulating in dedicated pathways, the SCARAB is controlled by a centralized computer or by a traffic management centre. Outside of the dedicated pathways the SCARAB is controlled by the user just like any other vehicle.

VEHICLE SPECS:
-The vehicle is composed of interchangeable modules that can be customized by the potential buyer/user.
-Powerpack module composed of a permanent battery plus 3 options for the main energy pack (battery, biofuel ICE or a fuel cell).
-4 wheel drive through electric brushless in-wheel motors with directdrive.
-Wheels with regenerative braking through EW Brakes.
-Drive by wire and tactile HUD embedded in the Lexan canopy.
-Structural elements in Carbon-Aramid composite.
-Embedded sensors, Lidar, radar, transponders, GPS. These serve to exchange information with the system, with other drivers and to have precise location data.

INFRASTRUCTURE:
-Communication nodes spread through roadways and traffic management centres in major conurbations.
-Dedicated paths with electromagnetic transponders embedded in the road.
-Parking facilities with solar/wind power generators.
-High speed/long distance travel provided through a railroad interface (not yet developed).

SYSTEM:
-Renting of the vehicle or modules that allows for a private/public/mixed utilization and transport access for people with less financial resources.
-Doesn’t need new infrastructures (uses the existing roads).
-Is backward compatible with current transport systems and uses current day technologies.

Designer : David Miguel Moreira Gonçalves